10 Baskets Retort Sterilizer for Tin Can Sardines/Tuna Sterilization |
Retort is designed and constructed strictly in accordance with the provisions of the GB/T150-2011 Standard for the Manufacture of Steel Pressure Vessels. The equipment complies with FDA/USDA standard requirements (FDA21CFR113 and 21CFR11) Retort vessel shall be constructed strictly in accordance with the provisions of the ASME Boiler and Pressure Vessel Code.
Saturated Steam Retort for Rigid Container Sterilization
For tin can sterilization, it's the simplest and most reliable type of retort. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation. The steam retorts are designed for even temperature distribution to deliver optimal come-up times.
DTS saturated steam retorts are capable of immersion and spray cooling with pressure control.
Motorized Chain Conveyor to aid basket loading unloading.
Space-saving gullotine door with hydraulic driven.
Retorts have intrinsically safe door locking mechanisms with electrical switches interlocked with the internal vessel pressure.
Standard sizes:
Corresponding to maximum size of manually operable basket and a capacity from 1 to 10 baskets, custom sizing to meet customer's throughput.
Retort complies with FDA/USDA standard requirements (FDA21CFR113 and 21CFR11)
Regulatory certifications : DTS Retorts can be designed and fabricated in accordance with the mandatory regulations of each country based on our know-how, therefore, DTS Retorts are installed in more than 30 courntries around the world.
Installation Instructions
Auxiliary Prepared by Customer Site
Boiler, Air Compressor, Cooling Tower
Training& Customer Care Service
We provide training in our factory and at customers' site, general maintenance, troubleshooting, our experienced technicians will provide training for your Retort operators, so that they can immerdiately put the theory into practice.
MANUFACTURER OF RETORTS FOR STERILIZATION OF CANNED FOODS AND BEVERAGES
DTS is a company exclusively dedicated to manufacturing retorts for canned foods since its foundation in 2010 and has become a technology leader and supplier of first-class high-tech autoclaves or retorts for sterilization of food and beverage products after hermetically sealed in cans, jars, pouches, carton bricks or any type of suitable or "retortable" container. In addition to the batch retorts, DTS also lauched a continuous vertical crateless retorts sterilizer with a revolutionary concept.