Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
Description General Purpose Applications Automotive(Connector) | |||||
General | |||||
Form Resin Pellets | |||||
UL Yellow Card | E353371-101107252 | ||||
Uses | Connector | ||||
Physical Nominal Value | Test Method | ||||
Density / Specific Gravity 1.31 g/cm³ | ASTM D792 | ||||
Melt Mass-Flow Rate, MFR(250 °C;2.16 kg) 38 g/10min | ASTM D1238 | ||||
Molding Shrinkage - Flow, Injection Molded(23 °C) 1.2 - 2.0 % | ASTM D955 | ||||
Water Absorption(24 hr;23 °C) 0.080 % | ASTM D570 | ||||
Mechanical Nominal Value | Test Method | ||||
Tensile Strength, Yield, Injection molded(50 mm/min;23 53.9 MPa °C;3.2 mm) |
ASTM D638 | ||||
Tensile Elongation, Break, Injection Molded(5 mm/min;23> 100 % °C;3.2 mm) |
ASTM D638 | ||||
Flexural Modulus, Injection Molded(1.3 mm/min;23 °C;3.2 mm) | 2260 MPa | ASTM D790 | |||
Flexural Strength, Injection Molded(1.3 mm/min;23 °C;3.274.5 MPa mm) |
ASTM D790 | ||||
Notched Izod Impact, Injection Molded(6.4 mm;23 °C) 44 J/m | ASTM D256 | ||||
Thermal Nominal Value | Test Method | ||||
Deflection Temperature Under Load, Unannealed, Injection Molded(1.8 MPa;6.4 mm) | 58.0 °C | ASTM D648 | |||
RTI Elec 140 °C | UL 746 | ||||
RTI Imp 130 °C | UL 746 | ||||
RTI Str 140 °C | UL 746 | ||||
Flame Rating 0.71 mm 1.5 mm 3.3 mm |
HB HB HB |
UL 94 | |||
Electrical | Nominal Value | Test Method | |||
Volume Resistivity(23 °C) | 1.0e+17 ohms ·cm | ASTM D257 | |||
Dielectric Strength(23 °C;1 mm) | 23 kV/mm | ASTM D149 | |||
Arc Resistance | PLC5 | ASTM D495 | |||
Comparative Tracking Index, CTI, Solution A | PLC 0 | UL 746 | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 100 - 120 °C | ||||
Drying Time<Injection> | 4.0 - 6.0 hr | ||||
Suggested Max Moisture<Injection> | 0.020 % | ||||
Rear Temperature<Injection> | 230 - 235 °C | ||||
Middle Temperature<injection> | 235 - 240 °C | ||||
Front Temperature<Injection> | 240 - 245 °C | ||||
Nozzle Temperature<Injection> | 240 - 250 °C | ||||
Processing Temp, Melt<Injection> | 240 - 250 °C | ||||
Mold Temperature<Injection> | 40 - 80 °C | ||||
Peak Melting Temperature | 223 °C |