| Material: | PP |
|---|---|
| Medium Material: | PP Membrane |
| Cartridge Filter: | PP Membrane |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
FGF Series Filter Cartridges are absolute rated, pleated depth-type filters, constructed of 100% polypropylene material. These filters are available in absolute particle retention ratings from 0.1 to 50 micron and various end cap configurations to fit into the most standard housings. All components of the FGF series filter cartridges are FDA approved. The filter media and its support structure are thermally welded to the end caps, making integral filter cartridges of minimum extractables in a wide range of fluids and applications. All the filter cartridges are manufactured in a clean room environment.
-Absolute rated structure, particle removal rating from 0.1 to 50 micron
-100% polypropylene components provide broad chemical compatibility, suitable for use in a variety of fluids
-Consistent particle removal, no migration of filter media and non fiber shedding
Food & Beverage
Plating Chemicals
RO Pre-Filtration
Fine Chemicals
Process Water
Outside Diameter: |
69mm |
| Length: | 5''/10''/20''/30''/40''/50'' |
| Filter media: | Pleated Depth Polypropylene (PP) |
| Support/Drainage and End caps : | Polypropylene (PP) |
| Adjustable flange : | Polypropylene (PP) |
| Seal Material : | Silicone,EPDM, NBR, Viton, E-FKM |
| Removal Rating: | 0.1, 0.22, 0.45,1, 3, 5, 10, 20, 50µm |
| Maximum Operating Temperature: | 80°C |
| Maximum Differential Pressure: | 4Bar,21°C |
| Recommended Change out Differential Pressure: | 2.4Bar,80°C. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}