DLM Series-PP Pleated Filter Cartridge
The DLM Series PP Pleated Filter Cartridge deliver high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50µm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process application. All the cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. Series cartridges are available in a while range of configurations to fit most commercially available filter housings.
Food and beverage
Oil & Gas
Prefiltration for RO
Paints & Coatings
Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases.
Pleated design increased the filtration area.
low pressure drop, long service life
Full range of removal ratings
Graded pore density for high dirt holding capacity
FDA compliance material
Outside diameter: 2.7" (69mm)
Length: 9.75",10", 20", 30", 40"
Material Of Constructions:
Filter media: PP
Cage/Core/End cap: PP
Seal Material : Silicone, EPDM, NBR, Viton, Teflon, E-FKM
Removal Rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, , 50µm
Maximum operating temperature: 80 @1Bar, support adaptors are recommended for temperature exceeds 50
Maximum operating differential pressure: 4.0Bar ,normal temperature
Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature
Sterilization temperature time: 5times, 20 Minute cycles at 120
DLM Series-PP Pleated Filter Cartridge P/N:
DLMPP-*-=-#-+ (e.g, DLMPP-0.22-10-F-S)
Code* Removal Rating
Code+ Seal Material