Scope of application:
Synchronous thermal analysis (TG and DSC) is to observe the change of the mass of the sample with temperature or time in the process of temperature rise, with the purpose of studying the thermal stability and composition of the material. Widely used in plastics, rubber, coatings, drugs, catalysts, inorganic materials, metal materials and composite materials and other fields of research and development, process optimization and quality control.
Product advantages:
1. The furnace body heating adopts the noble metal nickel-cadmium alloy wire double row winding system, reduce interference, more high temperature resistant.
2. Tray sensor, made of precious metal alloy seiko, has the advantages of high temperature resistance, oxidation resistance, corrosion resistance and so on.
3. Power supply, the circulating heat dissipation part is separated from the main engine to reduce the influence of heat and vibration on the micro thermal balance.
4. Adopt upper open cover structure, easy to operate. It is difficult to move up the furnace body to put samples, which can easily cause damage to the sample rod.
5. The weighing system is sealed with constant temperature to reduce the influence of temperature difference on the weighing system.
6. The furnace body can be replaced according to customer requirements
Product parameters:
| Temperature range |
The room temperature ranges from 1150ºC to -1450ºC |
Temperature resolution |
0.1 ºC |
| Temperature fluctuation |
Plus or minus 0.1 ºC |
Heating rate |
Heating rate |
| Temperature control mode |
PID algorithm control, temperature, constant temperature, cooling |
Constant temperature time |
The value ranges from 0 to 300 minutes |
| Program control |
Multi-segment program control |
Balance measuring range |
1mg~3g can be expanded to 10g |
| DSC range |
0-+500mW |
DSC resolution |
0.01 uW |
| Weighing system accuracy |
0.01 mg |
Constant temperature time |
The value ranges from 0 to 300 minutes |
| Display mode |
24bit color, 7 "LCD touch screen display |
| Atmosphere installation |
Built-in gas flowmeter, including two way gas switching and flow size control |
| atmosphere |
Inert, oxidizing, reducing static dynamic |
| software |
The intelligent software can automatically record TG curves for data processing and print experimental reports |
| Data interface |
Standard USB interface |
| Power supply |
Independent power supply housing design, avoid AC interference, AC220V50HZ |
| Operating software |
Four - in - one operating software that can be switched to meet the application switching test of differential, differential heat, thermogravimetric, and synchronous heat |
Audited Supplier 
){kind=link}
){kind=link}