Basic Info.
Housing Material
Mild Steel
Means of Communication
One-Way Communication
Name
DMX Decoder and LED Driver, RGB Controller W/ Dips
Product Description
24Channels DMX512 Decoder RGB Controller & LED Driver Input DC12-24V Constant Voltage Single CH Output PWM < 2A
DE8024
Feature:
1. Meets DMX512/1990
2.256-levels brightness, full-color with driver controls
3. Output 24 channels, MAX 2A per channel. Total current is 48A.
4. Can achieve asynchronous color changes effect under working with controller.
5. Cooperate with control system, can realize rich change effect.
6. Setting the DMX address freely
7. Modularizing and can be matched with different LED module neatly.
8. Custom-made available.
Tech-parameter:
Input: DC12-24V
Output: < 48A
Control channels: 1-24CH
Signal Input: DMX-512/1990 Digital signal
MAX Power: < 1152W
Frequence: 5000Hz
Work Temp.: 0~70
The light gray level: 256
Protection grade: IP40
Gross product: 460g
Product size: L250*W130*H 24(mm)
/Custom-made.
Function Instructions:
1. Drive output interface is altogether anode drive, has eight V + interfaces and 24 channel R, G, B output interfaces, can meet all kinds of full color module and monochrome module automatically according to the lamps module load adjust the output current, each channel maximum must not over 2A.
Note: The anode connection full-color module can be directly put the positive line and R, G, B line connected to the decoder output interface corresponding foot position; Monochromatic module can put the positive line to the decoder's output interface V + feet, negative line according to the color of the module connected to the decoder output interface R, G, B a foot position; A few kinds of color of monochromatic module connect to the same decoder, must put their positive line to the decoder output interface V + feet.
2. With self test procedures, the model of all lighting, put the dial switch 1 to 9 up and the lights are lighting.
3. RGB channel gradient mode, put the dial switch 1 to 9 down, it's channel gradient mode.
DMX-512 control signal connection
DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller output signal positive, signal negative, signal ground with DE8024 input interface corresponding connection.
DMX5000 each interface can with not more than 170 pieces of DE8024. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite contact the DMX lights.
When connecting 32 pieces of DE8024, DMX signal must add a signal amplifier RE2000. Cascade can't more than 4 PCS.
At the end of the connection, we should connect a DMX signal finalizer ( Put down the code switch no. 10 of DE8024 dial).
Address:
No. 255-2 The Second Floor, Longpan Road, Malu Town, Jiading District, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Lights & Lighting
Company Introduction:
Shanghai Jibang Electronic Technology Co., Ltd. is a force in LED control system, intelligent control system LED move light research and development of high-tech enterprises. DMX control system application development, realize network synchronization control, touch mode intelligent LED dimmers of master-slave product research, supporting large-scale control system is applied, DALI series products, 0/1-10 V dimmers research and development! Products used in outdoor billboard, building bright project, indoor decorative lighting, etc, all sorts of circumstances widely used.