DJ-A3-MF899F-25 fireproof sealant
Meet the requirements of JG/T475, GB 16776 and ETAG 002 standards at the same time, and provide 25-year quality assurance; 2. Neutral curing at room temperature to prevent surface corrosion of the adhered material; 3. Excellent fire and flame retardant performance; Ketone, adhesion and good temperature resistance; 5. Good air and water tightness; 6. Long service life; 7. No solvents and low boiling point substances, no pollution to the environment.
Features and advantages
Meet JG/T 475, GB 16776 and ETAG 002 standard requirements at the same time, and provide 25-year quality assurance
Neutral curing at room temperature to prevent corrosion on the surface of the adhered material
Excellent fire and flame retardant performance
Excellent weather resistance, adhesion and good temperature resistance
Good air tightness and water tightness
Longer service life
No solvent and low boiling point substances, no pollution to the environment
composition
Single component, neutral, room temperature moisture curing silicone structural sealant.
application
Suitable for high-rise, super high-rise building curtain wall, large-size glass panel curtain wall, structural assembly system of complex structure building curtain wall and flame retardant sealing of insulating glass.
Suitable for fireproof and anticorrosive sealing of bridges, ships, sewage treatment plants, subways, culverts, storage tanks, oil platforms, etc.
product manual
DJ-A3-MF899F-25 is a one-component, room temperature curing silicone sealant with multiple functions such as waterproofing, fireproofing, anti-corrosion and structural bonding assembly. It has excellent weather resistance and sealing performance. It is resistant to glass, aluminum, Various materials such as concrete and steel have good bonding properties.
colour
In addition to black, gray and white, it can also be produced in consultation according to the special colors required by customers
Adopt standard
DJ-A3-MF899F-25 meets or exceeds the following standards and specifications:
JG/T 475
GB 167 76
GB 23864
HB5273
ETAG 002
Application method
Surface cleaning
Remove all the grease, dust, water stains, frost, surface dirt, residual sealant, glass assembly accessories, protective coatings and other impurities and contaminants left in the joints and assembly parts.
Glue injection
Install backing materials, spacers, spacers and tapes as required. Masking tape should be used in the area connected to the seam to ensure a neat and beautiful sealant line.
For the surface of non-porous materials, there is usually no need to coat the primer to have good adhesion, but for the surface of some porous materials, primer may be required to ensure good adhesion. It is recommended to do it before the start of the project Adhesion test.
Continuously squeeze DJ-A3-MF899F-25 into and fill up the joints (sealant can be applied with pneumatic glue gun and other glue injection equipment). When using a pneumatic gun, the operating pressure should be adjusted to prevent bubbles from being generated during glue injection.
When the surface of the sealant is not skinned, press the sealant on the backing material and the joint surface with appropriate strength, and smooth the surface of the sealant.
After leveling, remove the masking tape immediately. Do not use liquids such as water, soapy water, or alcohol to help level it.
Operation precautions
If it gets into the eyes accidentally, rinse immediately with plenty of water
Do not keep in contact with skin for a long time, avoid contact with children
Do not contaminate food, medicine or cosmetics
Before use, please do a cohesive test and refer to the company's technical data and safety data sheet to learn about the safe use and hazards of the product. All safety items not involved in this product, please follow the requirements of relevant regulations
Storage and validity period
The packaged product can be stored for 9 months in a cool, ventilated and dry place, and used before the "expiry date" of the outer packaging
package
Flexible packaging: 592ml per strip, 20 strips per box
Use restrictions
This product has not been tested or stated as suitable for medical or medicinal use.
This product is not suitable for:
Joints in groundwater or places subject to excessive friction
Long-term immersion in water
On the surface of building materials that may seep oil, plasticizer, solvent, or partially vulcanized rubber gasket or tape
On frosty or wet surfaces
Places that are completely inaccessible to air during curing (the sealant needs to be cured by moisture)
The application of paint on the surface of the sealant (generally paint cannot adhere to the surface of silicone)
Direct contact with food or other food-grade surface applications
Audited Supplier 
){kind=link}
){kind=link}