Glazing Robot/ Glass Robot/ Glass Manipulator for Curtain Wall Installing
One of our top seller products glazing robot, which is combining the advantages of a Crane Truck and Vacuum Lifter, providing the economy and efficiency of the robot. This equipment with following features:
- Low noise and no pollution
- Comfortable operation and convenient charge
- Legerity turning, flexible, reliable operation
- Big wheels design, easy for outdoor use.
- Dual vacuum system design for safety
- Adopt optimum design, have solid frame and wide vision
Main Specifications:
- Maximum load: 600kg while the second ram back to end, 300kg while the second ram full extended
- Maximum lifting height: 3500mm from ground to the center of the suction frame
- Moving: automatically moving, speed control by manual roller sensibly
- Lifting control: with a hydraulic ram, controlled by manual mechanism valve sensibly
- Extension control: with a hydraulic ram, controlled by manual mechanism valve sensibly, maximum extension distance 650mm, maximum extension distance from the front wheel to the suction pads was 1350mm( the ram in parallel with the ground)
- Tilting control: with a hydraulic ram, controlled by manual mechanism valve sensibly, the maximum tilting degree near to 130 degree
- Rotation control: By manual, with a spring lock for positioning, the maximum rotation was 270 degree
- Side moving: with a hydraulic ram, controlled by manual mechanism valve sensibly, 75mm for both sides, totally 150mm
- Side turning: By manual, with a spring lock for positioning, the maximum rotation was 180 degree, 90 degrees for both sides
- Power: DC 24V
- Driven unit: the rear wheels driven with DC motor worked as a driven unit as well as for turning
- Wheels: 400mm*150mm *2 solid tire in front, single wheel of 300mm in rear
- Driven unit power: DC 24V brush-less motor, .1.2KW
- Hydraulic station power:1.2KW
- Battery: 12V,120A*2
- Maximum working period: about 20 Hours
- Charging power:220V
- Charging time: about 8 hours
- Vacuum system: Dual system
- Suction frame sized of 1800mm(L) and 800mm(W)
Specification
| Glazing Robot |
TA-300 |
TA-350 |
TA-400 |
TA-500 |
TA-600 |
TA-800 |
Rated Load
Capacity |
300KG |
350KG |
400KG |
500KG |
600KG |
800KG |
| Manual Rotating |
360° |
360° |
360° |
360° |
360° |
360° |
| Lifting Height |
3500mm |
3500mm |
3500mm |
3500mm |
3500mm |
3500mm |
| Manipulation |
Walkle Type |
Walkle Type |
Walkle Type |
Walkle Type |
Walkle Type |
Walkle Type |
| Battery |
2*12/80V/A |
2*12/90V/A |
2*12/100V/A |
2*12/120V/A |
2*12/120V/A |
2*12/210V/A |
| Charger |
24/12V/A |
24/12V/A |
24/15V/A |
24/18V/A |
24/18V/A |
AC110-220V |
| Drive motor |
24/1200V/W |
24/1200V/W |
24/1200V/W |
24/1200V/W |
24/1200V/W |
AC 24V/2.2KW |
| Lift motor |
24/2000V/W |
24/2000V/W |
24/2000V/W |
24/2200V/W |
24/2200V/W |
24/2200V/W |
| Overall Width |
810mm |
810mm |
810mm |
810mm |
810mm |
850mm |
| Overall Length |
2660mm |
2660mm |
2660mm |
2800mm |
2800mm |
3045mm |
Driving Wheel
Dimension |
250*80mm |
250*80mm |
250*80mm |
300*100mm |
300*100mm |
450*200mm |
| Pads Diameter |
300mm |
300mm |
300mm |
300mm |
300mm |
400mm |
| Glass Size |
3660*2440mm |
3660*2440mm |
3660*2440mm |
3660*2440mm |
3660*2440mm |
3660*2440mm |
Close-up pics:
Package Pics:
X Type Glass Lifter for Glass Installation in Curtain Wall Construction
Introduction:
1. Fully closed shell design, Q345 manganese steel square pipe welding, safe and reliable. Widely used in deep processing and handling of glass and installation of glass curtain wall,
2. American THOMAS DC vacuum pump and maintenance-free battery are adopted, and there is no need to connect air source or power supply during use
3. Panasonic digital display vacuum pressure switch and battery gauge can clearly monitor the safe operation of the equipment
4. The equipment has its own vacuum filling system, which can ensure that the whole vacuum system can be maintained at a relatively constant safe pressure value during the glass handling process
5. Equipped with voltage maintaining and alarm device after power off, the voltage maintaining function can extend the emergency treatment time, and make it safer to use
6. It is equipped with a 12V spare battery. If the battery is dead during operation, it can be replaced in time to ensure the progress of the project.
7. The battery is either power or ultra power, two batteries.
Specification:
| Working Capacity |
kg |
400 |
600 |
800 |
1000 |
1200 |
| Suction Cup Qty |
/ |
4 |
6 |
8 |
10 |
12 |
| Suction Cup Size |
mm |
300 |
300 |
300 |
300 |
300 |
| Suction Cup Working Load |
kg |
100 |
100 |
100 |
100 |
100 |
| Rotation |
/ |
360° Manual Rotation |
| Turning over |
/ |
90° Manual Turning Over |
| Power |
V |
DC12 |
| Charge |
V |
AC220/110 |
| Self Weight |
kg |
70 |
90 |
100 |
110 |
120 |
| Lifter Dimension |
mm |
850*750*300 |
1800*900*300 |
1760*1460*300 |
1900*1410*300 |
1900*1580*300 |
| Extended Arm |
mm |
590 |
| Control System |
/ |
Integrated Control Cabinet Design, equipped with additional wire remote |
Drawing & Suction Cups Arrangement layout:
Application:
Package:
Feedbacks
Welcome to contact us for more info.
In the future, we will provide better support to customers in the glass machinery and related consumables.
The most refreshing customer meets the most professional team, achieving the lowest cost fast cooperation.
Save customers a lot of time, purchase costs, get more professional team support, long-term consulting services, and cost-effective glass machinery products.
For glass factories, insulating glass factories, door and window factories, etc., the same support can be obtained.
Leave your email address, our team will provide the best solution we can provide.
Audited Supplier 
){kind=link}
){kind=link}