Characteristics of polymer fixed bandages: Easy to use, fast hardening (curing within 10 minutes), high hardness (strength is 20 times of plaster bandage splint), High strength protection (8 layers of mesh coating, high strength and hard to break, safety protection), Light weight (1/5 of the weight of plaster, 1/3 of the thickness), good air permeability (mesh material permeability is 200 times of plaster bandage), It is not afraid of water (it can be worn to take a bath), and it is clean and comfortable with disposable use, does not need to dismantle the X-ray film. The product in line with medical requirements. Usage:
The affected part was covered with two layers of sleeve bandage or wound with multiple layers of gauze, and then wound with multiple layers of medical liner, and glued with adhesive tape.
Before removing the bag, the medical worker must wear disposable gloves to ensure that the gel on the bandage does not come into contact with the skin.
Choose the right size bandage and open one bag at a time (don't open more than one bag at a time).
Soak the bandage in water at room temperature (10-30 ºC) for 3-6 seconds, and then squeeze 2 to 3 times, so that the water fully into the roll.
Squeeze out the excess water.
Wrap the bandage around the affected area in a spiral shape, 1/2 to 2/3 of the width of each turn, with appropriate tightness.
The unsupported part of the upper limb was overlapped and wound in 5-8 layers, while the load-bearing part of the lower limb was overlapped and wound in more than 8 layers.
Model, touch and fit, so that the layer between the layer bonding. Finish molding within 5 minutes after opening the bag.
The affected area cannot move for 10 minutes before the bandage is cured and can bear weight 15 minutes later.
The cured tubular bandage can be easily removed by cutting it in two halves with an electric plaster saw.