| Task: | Program |
|---|---|
| Structure: | Combination |
| Signal: | Continuous |
| Function: | Automatic Control |
| Certification: | RoHS, ISO: 9001, CE |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Order Data
|
Product Name |
Specification |
Order No. |
|
EtherCAT Slave Module ECT-00 |
PROFINET slave module, can be extended up to 8 modules(CAN and ECT is not included) |
CTH3 PNT-000S1 |
1. The PROFINET bus communicates at a rate of 100 Mb Ps, and the communication distance from station to station can be up to 100 meters (100BASE-TX);
2, topological structure support star, tree, linear, ring structure;
3. Each slave station is allowed to expand 8 I/O modules (digital quantity module, analog quantity module, temperature module, HSC, HSP, excluding CAN module /ECT slave station module).
4. Supported Siemens PROFINET master station, including Siemens S7-300, Siemens S7-400, Siemens S7-1200, Siemens S7-1500;
5. Configuration software TIA Portal V13 and higher.
|
Physical properties |
|
|
Size(W×H×D) |
34×115×100mm mm |
|
Power loss |
|
|
Rated input voltage |
24V DC |
|
Input voltage range |
20.4V~28.8V DC |
|
Input current |
0.8A |
|
Bus power supply voltage |
+5V DC |
|
Bus supply current |
1.6A |
|
Isolation |
External power supply is isolated from system power supply |
|
Power protection |
The power supply end provides the reverse connection protection function and the surge absorption function |
|
LED indicator characteristics |
|
|
24V power indicator (green) |
ON = 24VDC power supply is normal |
|
OFF = No 24VDC power supply |
|
|
SF indicator light (red) |
ON = extended I/O bus failure or PROFINET module failure |
|
OFF = No error |
|
|
BF indicator light (red) |
ON = PROFINET bus communication failure (no connection to switch, no network detected) |
|
Blinking=Inconsistent hardware configuration |
|
|
OFF = No error |
|
|
MT indicator light (yellow)(Maintenance indicator light)
|
Reserved |
|
Indicator light (green) |
ON = There is a connection to the switch /PN master |
|
OFF =No connection to switch /PN master |
|
|
Indicator light (yellow) |
ON = data receiving and receiving to switch /PN master station |
|
OFF = No data transceiver to switch /PN master station |
|
|
EetendI /O capabilities |
|
|
Maximum number of modules supported per slave |
8(can be added digital , analog and temperature module, HSC,HSP module, other types of module are not included) |
|
Protocol type |
CTH300 PLC custom 55MHz bus protocol |
|
Topology |
Support star, tree, linear, ring |
|
PROFINET communication port |
|
|
Communication port |
1 dual RJ45 port |
|
Data transmission rate |
Ethernet with a transmission rate of 10Mbps |
|
The PROFINET transmission rate is 100Mbps, full duplex |
|
|
Supported Ethernet services |
Ping, ARP, Network Diagnostic (SNMP)/MIB-2, LLDP |
|
Sending cycle |
250us~4ms |
|
Third-party PROFINET master station |
Support |
|
Longest communication distance from station to station |
100m(100BASE-TX) |
|
Topology |
Supports star, tree, linear and ring topologies |
|
Isolation |
Communication port isolation |
|
Hardware configuration function |
|
|
Import file type |
Profinet GDS file XML format |
|
Third-party PN master station |
The addition of the CTH3 PNT-000S1 module supports the expansion of 8 slots |
|
Expansion module can add digital, analog and temperature module, HSC,HSP module, other types of module are not included |
|
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}