Corrugated Cardboard Making Vacuum Fingerless Single Facer Machine
Structural Features:
- Paper feeding: fingerless vacuum suction, with high pressure powerful draught fan. With silencer, air supply and electric control focus on the same operation counters, not less than 1.5m away from the main engine, operation side is totally closed and full guarding.
- Engine base and wall plate: iron casting structure, thickness of the wall plate: 150mm, adopt independent speed changing box, and gimbal transmission.
- Diameter of main corrugated roll: ¢320mm, and are made of 45# steel, after hardening and tempering, inner holes fine boring, NC grinding, mid frequency quenching, surface grinding, the rigidity of surface is higher than HRC58. Corrugated roll and pressure roll of pivotal section adopt heat resisting bearings which are manufactured by TWB
- Pressure roll diameter: ¢320mm, surface are grinding and plate chrome, cylinder control up-down, raw material is 45# medium carbon steel, hardening and tempering
- Glue wall plates adopt sliding structure, pneumatic control glue supply and glue back, diameter of the applicator glue roll : ¢242mm, surface are treated by polished and chrome plated.
- Press roll adopt ¢160 cylinder
- Pre-heater roll adopt seamless steel pipe which is produced by Tianjin Iron & steel group co,.ltd. Diameter ¢400mm, are all connected with metal soft pipe.
Technical parameter:
- Working width: 2200mm
- Operation direction: left or right
- Design speed: 150m/min
- Temperature scope: 160-220 C
- Steam pressure: 0.8-1.3Mpa
- Flute profile (UV type or UVV type)
Parameter of Main roll:
- Diameter of corrugated roll: ¢320mm
- Diameter of pressure roller: ¢320mm
- Diameter of applicator glue roll: ¢242mm
- Diameter of preheater roll: ¢400mm
Motor parameter:
- Main driving motor: 15KW
Normal voltage: 380V 50HZ
Continues (S1) working system
- Wind suction motor: 15KW
Normal voltage: 380V 50HZ
Continues (S1) working system
- Glue adjustment reduction box: 100W
Normal voltage: 380V 50HZ
Short time (S2) working system
- Glue adjusting gap motor: 2.2KW
Normal voltage: 380V 50HZ
Short time (S2) working system
- Glue pump motor: 2.2KW
Normal voltage: 380V 50HZ
Continues (S1) working system
Main bought-in parts and raw material and origin
| No |
Main parts name |
Origin |
Raw material |
| 1 |
Wall plate and based wall plate |
Self |
HT200 |
| 2 |
Transmission case |
Local factory |
QT200 |
| 3 |
Rotary joint and metal soft pipe |
LUGUANQIU, Shangdong |
|
| 4 |
Main driving motor |
Hengshui |
|
| 5 |
Bearing |
HRB, ZWZ, LYC, WANXIANG |
Except corrugated roll and press roll bearing |
| 6 |
The shaft with seat |
Wuhuan, zhejiang |
|
| 7 |
High pressure fan |
Yinfa, shanghai |
|
| 8 |
Cylinder |
CHINT |
|
| 9 |
Magnetic valve |
CHINT |
|
| 10 |
Drain valve |
Xusheng, zhejiang |
Stainless steel |
| 11 |
Relay |
CHINT |
|
| 12 |
Inverter controller |
Yingweiteng, shenzhen (ENG) |
|
Wearing parts and spare parts list
| No |
Main parts name |
Type |
Qty |
| 1 |
Wind suction copper sheet |
|
4 sets |
| 2 |
Paper-shaving sheet of pressure roller |
|
4 sets |
| 3 |
Scraping glue plate |
|
2 set |
| 4 |
High temperature lubricating grease |
|
1 barrel |
| 5 |
Metal soft pipe |
|
1 set thick
1 set thin |
| 6 |
Valve |
¢25 ¢40 |
1 set of each type |
Packaging & Shipping
After the machine is finished and running well, it will be coated with anti-rust oil, which makes the machine not easy to rust in the container, and winding film to prevent moisture. Each unit of the machine will be fixed in the container to ensure a stable and safe arrival at the destination.
Our Services
1. OEM service are available.
2. Trade Manager online, also contact by Email.
3. To solve problems by pictures/videos.
4. Engineers are available service abroad.
PS: Normally our machines are uneasy to broken because of our
professional machine making team and strict QC team, we will
also send you our manual and video, what you need to do is just
learn some basic thing such as machine maintenance.
FAQ
1. Are you a factory or trading company?
We are both a factory and a trading company in this field .
2. What is the terms of payment you accept?
We usually accept the T/T payment, we need 30% of total amount as deposit,
pay the 70% balance before delivery, but we can also accept the L/C.
3. Where is your factory located ? How can I visit there?
Our factory located in Dongguang County, Hebei Province, China., near to the
capital city Beijing and port Tianjin. You can fly to Beijing airport directly and we
will pick you up there.
4. How does your factory do regarding quality control?
Quality is priority. We always regard great importance to quality controlling from the very small thing(even a small screw we will choose the best quality) from the beginning.
Contact Information:
If you are interested in our products,
please fell free to contact and visit me.
You are welcome all the time!
Mobil:0086 18713707985
ABOUT US:
Hebei Dongguang North Pack Co.,Ltd is located in Hebei Province Dongguang County, Packaging Machinery Industry Area. We are specialized in the production of Carton packaging Machinery . We have advanced production processing equipment and high-quality technical and management personnel. Mainly produces3/5/7 layer Corrugated Cardboard Production Line, medium and high speed FLEXO Ink Printing Machine, Slotting Machine, Die-cutting Machine, Stitching Machine, Gluing Machine, stitching machine and other related series equipment. Our company has the import and export rights, products have been exported to Russia, Iran, Turkey, Egypt, India, Pakistan, the United Arab Emirates, Mesico, Brazil and other countries and regions.
Company selling machines
Audited Supplier 
){kind=link}
){kind=link}