After-sales Service: | Available |
---|---|
Warranty: | 1 Year |
Type: | Powder Coating or Painting Remove |
Coating: | Powder Coating / Painting |
Substrate: | Steel |
Certification: | CE, ISO |
Customization: |
---|
Suppliers with verified business licenses
Burn-off Oven For Removing Paint & Powder Coating
Introduction: The hot cleaning furnace can efficiently and safely wash the chemicals attached to metal parts .Use of polymer is higher than 300 degrees was isolated from the air can be cracking, above 400 degrees in a small amount of air can completely oxidation characteristics, The organic matter on the surface of the hanging device or workpiece to be treated is heated to the decomposition temperature in the first combustion chamber and automatically controlled at this temperature Interval, so that the workpiece surface coating (paint, oil, epoxy polyester, etc.) cracking into organic gas. Organic gas into
The second combustion chamber ,it is fully burned in the high temperature environment of the second combustion chamber, and finally produces colorless, non-toxic, odorless gas and exhaust through the chimney. The exhaust gas is strictly tested and certified by authoritative environmental protection testing institutions, and the indicators are up to date National environmental protection emission standards. After the treatment of the hanger or workpiece, as long as gently beat or wash off the surface of the inorganic substance .The machine can be used again.
By thermal cleaning to remove surface coating and paint of the hanging work pieces,they are placed in the main decomposition chamber at ambient workpieces temperature from 250 ~ 480 ºC to removal of organic matter on the workpiece. After the process, the surface of work piece is without any organic coating layer residual..
Size:
Model
|
Outer Size (LXDXH cm)
|
Working Size (LXDXH cm)
|
Max.Workpiece Size (LXDXH cm)
|
Capacity (m3)
|
ZY-02
|
171x170x181
|
145x145x145
|
130x120x120
|
2
|
ZY-04
|
200x199x210
|
174x174x174
|
160x150x150
|
4
|
ZY-06
|
229x199x239
|
203x174x203
|
190x150x150
|
6
|
ZY-08
|
258x199x239
|
232x174x203
|
210x150x150
|
8
|
ZY-10 | 287x228x239 | 261x203x203 | 240x180x150 | 10 |
ZY-12 | 287x228x268 | 257x198x230 | 240x180x180 | 12 |
ZY-16
|
374x228x268
|
348x203x232
|
330x180x180
|
16
|
Any size can be customized.
|
Technical parameter:
Application: | Remove organic matter not limited to epoxy, polyester, mixed powder coatings and paints on workpiece surface |
Fuel requirements: | Light diesel/natural gas/liquefied petroleum gas |
Control mode: | industrial PLC automatic control |
Operating temperature: | 250° C ~480 ° C adjustable (secondary combustion chamber temperature 500 ° C ~1200 ° C) |
Furnace wall temperature: | ≤60ºC |
Chimney wall temperature: | <150ºC |
Alarm mode: | sound and light alarm |
Product characteristics:
1. Industrial microcomputer system, no manual setting time and temperature, control system automatically control shutdown time
2. Stainless steel liner, prolong the life of furnace body by 2 times
3. The main parts are imported with high reliability
4. The combustion chamber is made of rare earth foam with special mold, which is produced by professional factory. It has longer life, good heat insulation effect and 30% energy saving
5. Cooperate with automatic water control system to ensure that the furnace can still operate safely when the short time water supply is interrupted
Multi-level safety protection, water spray + temperature limit protection + explosion-proof door + automatic alarm
6. Low operating cost, only 1/8 of the cost of chemical treatment
7. Controllable working temperature, effectively reduce the rigidity and strength loss of the workpiece
8. Exhaust gas is mainly harmless substances such as CO2 and water, among which the emission of SO2 and NOX is far lower than that detected by environmental protection departments
Temperature control system And safety assurance:
1. Realize fine control of temperature slope according to temperature variation;
2. Automatic run time control;
3. Adopt proportional adjustment combustion mode to make the temperature rise smoother and the equipment run more stable;
4. The machine automatically detects the water pressure when it is started. If there is no water pressure, the device cannot be started.
5. Automatically detect the nozzle after startup to eliminate the blockage of the nozzle;
6. Detect the water spraying condition, close to the limit when the nozzle is in the normal spraying state;
7. Water spraying is divided into emergency water spraying and working water spraying. Emergency water spraying adopts never blocking nozzle to ensure the safety of equipment.
8. The equipment is equipped with an emergency stop switch to forcibly stop all operations and energy of the equipment;
Is it safe to order from Shaoxing Synergy?
Suppliers with verified business licenses