Basic Info.
Cartridge Model
T0341-T0347
Tank Capacity
100ml Per Color for Ink Tank
Chip
New Version Auto Reset Chip
Product Description
Continuous Ink System for Epson Stylus Photo Stylus Photo 2100/2200 Printer
Product Description
No more Ink Cartridges purchase, No more Cartridges replacement. Refillable ink cartridges/ink reservoirs enable countless refills.
Pre-filled with 100ml x 7 colors = 700ml of premium UV(Ultra Violet) Resistant dye based Ink.
Quick and Easy installation. You will be printing in minutes.
95% Saving on individual Inkjet Cartridge.
No Leaking or Clogging
Pre-Assembled
Environmentally Friendly
Permanent Chip. Auto-reset chipsets automatically reset the cartridges so there is no need to utilize a chip resetter nor take the cartridges out of the printer to refill.
Product Detail |
The CIS(Continuous Ink System) consists of a high-capacity ink reservoir (same as using between 8 ~ 10 ink cartridges per color) that is attached to a cartridge via secure tubing. The tubing acts as a vacuum to extract ink from the reservoir and keep the cartridge full of ink. Because of the large reservoir capacity, you can print for an extended period of time without running low right away. There is a red line on the reservoir to indicate when it is time to refill.
Each CIS comes complete with easy-to-follow instructions, ink, and all accessories needed to successfully use the system. The included UCI cartridges have a permanent smart chip already installed, which will automatically reset itself when your printer power is turned off (for 5 seconds) and turned back on. No mess! No leaking!
Not only do you get the Unit-kit Continuous Ink System but you will receive an abundance of ink to get you started. - 7 Color Assortment includes Photo Black, Light Black, Cyan, Light Cyan, Magenta, Light Magenta and Yellow in 100ml bottles.
For your convenience, there is a filter built into the ink tank, to prevent outside agents from contaminating and/or affecting the quality of your prints.
|
Additional Information |
OEM CArtridge No. |
T0341 : Photo black T0342 : Cyan T0343 : Magenta T0344 : Yellow T0345 : Light Cyan T0346 : Light Magneta T0347 : Light Black |
This item contains |
1 x Continuous ink system 1 x 100ml PHOTO BLACK Ink 1 x 100ml CYAN Ink 1 x 100ml MAGENTA Ink 1 x 100ml YELLOW Ink 1 x 100ml LIGHT CYAN Ink 1 x 100ml LIGHT MAGENTA Ink 1 x 100ml LIGHT BLACK Ink |
Instruction Manual |
Instructional Manual Continuous Ink System for use in Epson Stylus Photo 2100 / 2200 |
Before using this product, please read and follow the instructions. After opening your package, make sure to check that all the accessories |
Conduct Parts Check: |
1. Accessories |
Continuous Ink System (1) Cartridge covers (2) Air breather plugs (6) Cartridge pad (1) Syringe(1) Zip Ties (optionas) (6) Adhesive pads for tube attachment (8) |
|
2. Set-Up Continuous Ink System(CIS) |
a. Before installation, lay out all your parts in front of your printer.
b. Check your system for any leakage, and make sure your tubing system is tightly blunded and straight as shown in Fig 1-1.
c. Place the CIS on the right hand side of the printer (Fig 2-1) ,and keep it at the same level with printer
d. Hold down the ink tank with one hand and unplug the original air stopper(Fig 2-2).
e.Insert the provided air breather plugs as shown(Fig2-3). |
|
3. Cartridge Installation |
a. Open printer cover and make sure cartridge compartment is on the left side and easily accessible.
b. Unplug the printer.
c. Remove original cover, and carefully install CIS cover (Fig. 3-1).
d. Attach color cartridge pad to the back of color cartridge (Fig 3-2).
e. Ensuring that colors correspond, push cartridges all the way down in compartment.
f. Make sure the cartridge tubing comes up between color and black cartridge cover (Fig. 3-3). |
|
4. Tube Adjustment and Positioning |
a. Use adhesive pads to attach tube guide securely on the top right of the printer (Fig 4-1).
b. Make sure the tubes are not twisted and are straight (Fig 4-2-through 4-3). |
|
c. Adjust tubing between cartridge compartment and tube guide to correct length; allowing enough room for the cartridges to move back and forth freely (Fig. 4-4 through Fig 4-6). |
|
|
|
d. Plug printer back in and make sure system moves securely and smoothly. |
5. Refilling Ink |
When the ink levels reach the indicator margin (sticker on the ink tank with red line (fig. 5-1), the ink tank system has reached its quotient line and needs to be refilled (Fig 5-2). |
|
Follow these steps:
1. Gently remove the air breather plugs in order to have more filling room.
2. Remove plugs off of filling hole and refill the proper color of ink into the corresponding ink tank (Fig 5-2), (use towel to wipe off any spillage).
3. Make sure you use the specially designed inks for the CI System as they are designed for optimal results.
NOTE: When removing CI System, remove cartridges and put tape or napkin over dispensing hole.
Printer and ink tank MUST remain at the same level (not higher and not lower). |
6. Ink Levels |
If your computer gives you a low ink warning but your ink tanks are still full, turn off your printer, wait for one minute and turn on again. The printer will reset itself and will continue printing normally.
Attention :
1. After installing the CI System, do not remove the cartridges.
2. When you are printing do not move the ink tank up or down. Keep it stable and at level with the printer.
3. Store at 15-35 degrees Celsius.
4.The ink and cartridge flow have been designed and tested to function as a unit. We recommend you use specially designed ink for the CIS for optimal results.
Caution:
1. Do not ingest ink and keep out of reach of children.
2. Do no leave under sunlight or in extreme weather conditions.
3. Do not drop ink tank or handle roughly.
Thank you for purchasing the Continuous Ink System: We hope you found this manual useful. |
Address:
Floor 2, No. 106, Zhenxiang New Street, Yonger Industry, Tanzhou, Zhongshan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Consumer Electronics, Office Supplies, Packaging & Printing
Management System Certification:
ISO 22000
Company Introduction:
Zhuhai Wenon Digital Technology Co., Ltd. Was established in "the Global Printer Consumable Center" - Zhuhai City in 2007. As a comprehensive manufacturing, we specialize in producing all kinds of printer consumables, including Coffee printer, Edible ink, Edible ink cartridge, Printhead, Refillable ink cartridges, Sublimation ink, Medical Film Ink and other printer Ink. We are famous for superior quality, competitive prices, first-class craftwork, safe packages and prompt delivery. Therefore, we can fully satisfy your demands and have a large customer base. Our products sell well domestic and overseas. We have a strong R&D department and experienced engineers. We can design and make OEM/ODM products according to your ideas and samples. In order to keep advantage in the printer consumable industry, we have imported advanced equipment and expanded our production scale. With excellent designers, experienced technicians and strict supervisors working together, we can bring new and high-class products to our clients all the time. "High technology, high quality and strict management" is our persistent goal. Providing first class products is our aim. To create a beautiful future, we would like to cooperate with all friends from at home and abroad. Should you have any interest in our products, please do not hesitate to contact us.