Closed Type Low Temperature Filter Cake Drying Machine
Introduction:
The running process does not produce dust,waste gas,which makes it the best environment protection drying equipment at present.
Product advantages:
1. R&D and testing started in 2013 and put into market use in 2017.
2. Suitable for materials with moisture content of 55%-83%, the moisture content of the discharge is 3%-50% freely adjustable, and the reduction is over 80%.
3, fully enclosed structure, no odor emission.
4, 40 ° C -78 ° C low temperature work, more safe, no dust hazard.
5, closed system combined with heat recovery technology, no heat loss.
6, high-strength anti-corrosion materials, stable and durable, not affected by the environment.
7. The civil engineering requirements for the drying workshop are simple; (the dryer base is 250mm above the ground, and the condensate flows out by its own weight.
The basic flatness requirement of the dryer is less than 5cm, and the basic load-bearing requirements are: dynamic load 1.4 tons/square meter).
8. The drying process takes about 60-120 minutes to reach Pasteur (Pap) sterilization conditions, effectively killing more than 90% of E. coli.
9, electric energy drying: 1 degree of electrical energy output 2.5-5 kg of water.
Dry heat drying: 1-1.2 tons of steam is required to produce 1 ton of water
Material after drying:
what material we have tested:
Our service
1. supply the free material testing in laboratory and give out the report for free.
2. supply free model selection according to your capacity and other information.
3. supply manual operation to insturct the operation.
4. supply installation instruction.
5. supply full set of filtration solution . We have top pump , valve , motor agreement supplier , can give you turnkey service.
FAQ:
1. How to buy your interested products?
You can provide us the water sources, water quality, flow rate and ground area, material requirements about your project (More details, please contact us).
2. How to pay?
L/C or T/T are acceptable.
3. What is the delivery time?
It depends on order quantities. Generally speaking, the delivery time will be within 2 months.
4. How to pack the products?
We use standard export package. If you have special package requirements, we will pack as you required, but the fees will be paid by customers.
5. How to install after the equipment arriving destination?
We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
6. How long is the validity?
The validity is 12 months after installation.
Contact :
Audited Supplier 
){kind=link}
){kind=link}