Ck5126 Vertical Lathe with Single Column

C518 vertical lathe with single column
Applications and Features:
1) Tool
Tool holder's screws adopt special steel, hardening treatment, guarantee wear well. Pentagon tool holder can be equiped by any tools, such as drilling, boring and turning and so on. Exact position, fast clamping, easy operation.
2) RAM
RAM adopts high strength nodular cast iron, with high compression strength and good abrasive resistance, ensure the stiffness while the machine heavy cutting. According to the requirement of workpiece, square RAM and pentagon tool can be optional.
3) Spindle bearing
Spindle bearing adopts the inland famous brand, improve the accuracy of the machine, long use period. The construction of the worktable is designed as the standard technological requirements, which can make the strength of the worktable improve greatly and it is not easy to deform and crack, good stability when using for a long time.
4)Worktable
The base of the worktable is annealing treatment, after turning, the guideway and the joint surface of worktable is hand scraping, then closed by oil film to ensure stable run.
5) Feed box
The worm gear in the elevating box and the feed box adopts the latest allumen to ensure the parts abrade lightly and increase of service life when using.
6) Hand scraping
The important faying face like beam, slide seat, lathe bed is hand scraping, physical dimension accuracy of scraping face is high, scraping face is combined tightly, which can increase the reserve of lubricating oil and reduce the friction parameter between faying faces to increase of service life.
7) Motor
The motor adopts the inland famous brand, enough driving force, wear well.
8) Gear box
The gear box adopts 40Cr material, with carburization and quenching treatment, all gears are with ground finish, stable run, small noise, make the abrasive resistance of the gear is stronger under the heavy load, increase the service life of the gear box's gear.

Main prameter:
Specification Unit C518 C5112
Max. Turning diameter mm 800 1250
Table diameter mm 720 1000
Max. Weight of workpiece t 1.2 3.5
Range of table speeds r/min 45-200 6.3-200
Steps 16 16
Power of motor kw 18.5 22
Max. Height of workpiece mm 800 1000/1200
Stroke of vertical tool(level) mm 570 700
Stroke of vertical tool(Vertical) mm 550 650
Stroke of side tool(Level) mm 500 600
Stroke of side tool(Vertical) mm 810 900
Weight of machine(Approx. ) t 6 9
Overall dimensions mm 2080*2400*2730 2277*2540*3403/3603