Material: | Aluminum Alloy |
---|---|
Usage: | for Vacuum and Compressor |
Flow Direction: | Side Channel |
Pressure: | High Pressure |
Certification: | RoHS, ISO, CE, CCC, SGS |
Product Name: | Side Channel Blower |
Customization: |
---|
Suppliers with verified business licenses
Product Name | Chinese High Pressure Air Blowers Suppliers Focus on the ring blower industry for 20 years, Quality assurance of qualified manufacturers |
|
Model No. | GHBH 002 34 1R7 | |
Frequency | 50Hz | 60Hz |
Rated Power | 1.6kW | 2.05kW |
Rated Voltage | 200-240△/345-415Y(V) | 220-275△/380-480Y(V) |
Rated Current | 8.5△/4.9Y(A) | 8.8△/5.1Y(A) |
Max Airflow | 318m³/h | 376m³/h |
Max Vacuum | -160mbar | -160mbar |
Max Pressure | 150mbar | 150mbar |
Sound | 69db(A) | 72db(A) |
Weight | 26kg | 26kg |
Side channel blowers are used in these industry sectors:
·Pneumatic conveying
·Transport und handling
·Packaging industry
·Electrical engineering and electronics
·Plastics industry
·Food industry
·Drinks industry
·Printing and paper industry
·Wood processing industry
·Textile industry
·Medical technology
GOORUI Side channel blowers are maintenance-free:
·External, permanently lubricated bearings
·Contactless rotating impellers
·Fan-cooled motors
GOORUI Side channel blowers are user-friendly:
·Weight-optimised design through aluminum pressure casting parts
·Possibility for a vertical or horizontal installation
·Suitability for converter operation
GOORUI Side channel blowers are environmentally friendly:
·Oil-free operation
·Low energy requirement
·Low noise emission
GOORUI Side channel blowers can be used world-wide:
·50/60Hz voltage range motors of the Iso class F
·Protection type IP55 with an integrated thermal protection switch (standard)
·CE, TUV, RoHS, CCC and ISO9001 certifications
We also have some parts for your application, if you need, welcome to tell me.
Air filter: Filter the dust particles, apply to a bad environment.
Silencer: reduce blower noise 5-10db, apply to a quiet environment.
Pressure relief valve: Control gas pressure, prevent excessive pressure, damage the machine.
Instructions:
1. It should be placed in a relatively stable place, and the surrounding environment should be clean, dry and ventilated.
2. The direction of rotation of the impeller must be consistent with the direction of the pointed tip marked on the fan cover.
3. When working, the working pressure should not be greater than 8 kPa, so as to avoid excessive heat generation of the air pump and damage to the air pump caused by motor overcurrent.
4. It is strictly forbidden for solid, liquid and corrosive gas to enter the pump body.
5. The filters and silencers at both ends of the air inlet and outlet should be cleaned in time according to the situation to avoid clogging and affecting use.
6. The external connection of the air inlet and outlet must be connected by a hose (rubber tube, plastic spring tube).
Precautions:
1. Flat washers and spring washers must be used to tighten the screws.
2. It is best to use rubber buffer rubber to bear the weight of the vortex air pump, especially the high-power vortex air pump, which is indispensable.
3. For some occasions that require noise, a silencer can be installed to reduce the noise (generally down, about 5 dB), the silencer is installed at the end of the inlet duct or outlet duct.
4. For some occasions with high requirements for noise, you can add a layer of silencer cotton according to the conditions of the machine itself to meet the noise requirements on site. For details, please consult our customer service.
5. When using silencing cotton to silence the sound, pay attention to the distance between the vortex air pump and the box, pay attention to the ventilation and heat dissipation of the vortex air pump, and pay attention to using rubber cushioning to bear the weight of the vortex air pump. According to the picture, you need to consult customer service.
6. The air inlet and outlet of the vortex air pump For pipe connection, hose connection should be used to isolate vibration.
Shipping way: By sea or By air or By your agent in China.
Delivery terms
CIF by sea or air freight terms
FOB SHENZHEN/GUANGZHOU
EX-WORK TERMS
DDP/DDU
DHL/FEDEX/UPS courier door to door
Other delivery terms are negotiable.
Delivery time
In stock blower: 2-3 days after payment
Out of stock blower: 7-15 days after order confirmed.
Special blower need to check specific
We at GOORUI side channel blower bring to you a new generation of technology offerings coupled with end-to-end
customized solutions. GOORUI product range in eludes:Single-stage Single-phase blowers,Single-stage Three-phase blowers,Double-stage Single-phase blowers,Double-stage Three-phase blowers,Three-stage blowers,Special Customized blowers.
If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your kind cooperation!
Suppliers with verified business licenses