| After-sales Service: | on Line Technical Support |
|---|---|
| Warranty: | One Year |
| Type: | Sweep and Suck Type |
| Certification: | ISO9000, CCC |
| Transmission Type: | Manual |
| Emission Standard: | Euro 5 |
Suppliers with verified business licenses
Audited Supplier
| Vehicle name | CLW5250TXSD6 | Chassis model | DFH1250D4 | ||||||||
| gross mass | 25000kg | curb weight (Kg) | 15800,15000Kg | ||||||||
| Rated load quality | 9070,9005,9870,9805kg | wheel base | 4350+1350mm | ||||||||
| Water box volume | 12m³ | Dumpster volume | 9m³ (stainless steel) | ||||||||
| Tyre model | 11.00R20 | Clean the width | 3.5m-4.1m | ||||||||
| effluent standard | Country GB3847-2005, GB17691-2018 | ||||||||||
| The vehicle is long, wide and high | 9600×2510×3350 mm | ||||||||||
| main engine | horsepower (ps) | Cummins 290 | |||||||||
| displacement (ml) | 213 | ||||||||||
| Engine secondary | Clean up the engine model and the production enterprises | Dongfeng Cummins Co., Ltd | |||||||||
| power (kw) | 125 | horsepower (ps) | 170 | ||||||||
| displacement (ml) | 5900 | ||||||||||
| do line of business nature ability |
wash sweep do line of business |
Maximum washing width (including curb cleaning width) | 4.1m | ||||||||
| Road surface washing width (excluding curb cleaning width) | 3.5m | ||||||||||
| Cleaning speed | 3∽10Km/h | ||||||||||
| Rated pressure of the cleaning water | 10MPa | ||||||||||
| Rated flow rate of the cleaning water | 122L/min | ||||||||||
| unmixed sweep do line of business |
Clean the width | 3.5-4m | |||||||||
| Cleaning speed | 3∽15Km/h | ||||||||||
| Cleaning speed | 3∽20Km/h | ||||||||||
| Maximum cleaning capacity | 70000M2/h | ||||||||||
| angle of discharge | ≥30 | ||||||||||
| Low pressure flushing width | 24m | ||||||||||
| rideability | Max. vehicle speed (full load) | 89km/h | |||||||||
| Maximum climbing Angle | 30° | ||||||||||
| Brake distance (full load of 30 Km/h) | ≤10m | ||||||||||
| Minimum turn diameter | 19m | ||||||||||
| fuel consumption | Limit the fuel consumption for 100 kilometers in working conditions | 18L/100km | |||||||||
| Full cleaning operation Operation speed 7 km/h (2nd gear idle) |
The secondary engine speed is 2,000 r/min | 13.7L/h | |||||||||
| 5.64L/10000m2 | |||||||||||
| Secondary engine speed is 1,700 r/min | 8.9L/h | ||||||||||
| 3.76L/10000m2 | |||||||||||
| Full sweep operation operation speed 7 km/h (2nd gear idle) |
Secondary rotation speed is 2000r / min | 11.1L/h | |||||||||
| 4.59L/10000m2 | |||||||||||
| Secondary er speed 1700r / min | 7.2L/h | ||||||||||
| 3.12L/10000m2 | |||||||||||
| structure size | tread | front wheel | 2010mm | ||||||||
| back wheel | 1860mm | ||||||||||
| approach angle | 20° | ||||||||||
| departure angle | 12° | ||||||||||
| Minimum ground clearance | 230mm | ||||||||||
| Type and parameters of the main components | |||||||||||
| wind machine |
type | Special high pressure centrifugal fan model No7.1#C, the maximum air volume of 23500M3/h | |||||||||
| rated speed | 2400r/min | ||||||||||
| Transmission type | Narrow V-Band Drive (Model 15N-2690,5 roots) | ||||||||||
| liquid press tie interconnected system |
type | Open type, electro-hydraulic control and centralized control | |||||||||
| major component | Gear pump / 1, hand pressure pump / 1, Cycloid motor / 2-piece, hydraulic cylinder Integration block et al |
||||||||||
| Overflow pressure | 15MPa | ||||||||||
| Hydraulic oil capacity | 60L | ||||||||||
| electricity gas tie interconnected system |
control method | PLC control + manual control, electromechanical liquid interlock, etc | |||||||||
| Chassis vehicle system voltage | 24V | ||||||||||
| Operating unit system voltage | 24V | ||||||||||
| Battery model | 12V-140A. H (2-only-in series) | ||||||||||
| tall press unmixed wash tie interconnected system |
High pressure pump | type | ram pump | ||||||||
| model | GTM-GF36 | ||||||||||
| rated pressure | 10MPa | ||||||||||
| System use pressure | 10MPa | ||||||||||
| rated flow | 122L/min | ||||||||||
| rated speed | 800r/min | ||||||||||
| Transmission type | Narrow V-band drive (Model 15N-1900,3 root) | ||||||||||
| Water valve and control | Water valve type | High-pressure stainless steel ball valve, 10MPa | |||||||||
| control method | Cylinder drive, electrical control | ||||||||||
| Water spray rod nozzle type | High pressure washing type | ||||||||||
| Type and parameters of the main components | |||||||||||
| Low pressure flushing system | Low pressure pump | model | Yifeng: 50 / 110 | ||||||||
| rate of flow | 60m3/h | ||||||||||
| head of delivery | 90m | ||||||||||
| Rinse width | 24m | ||||||||||
| Sweep the dust system | Electric water pump, sprinkler nozzle. With the high-pressure cleaning system, share the water filter, water tank, etc | ||||||||||
| unmixed sweep tie interconnected system |
type | Between the front and rear axles of the chassis, a symmetrical position of the frame is arranged on both sides of the frame. The sweep hover is driven by the hydraulic motor, and the speed is adjustable. | |||||||||
| Brush diameter | φ900mm | ||||||||||
| Scan disk speed | At 600 rpm | ||||||||||
| Slash tilt Angle adjustment | Forward: 4° -6°; out 2° -4° | ||||||||||
| inhale mouth |
type | Double suction mouth wide suction nozzle, built-in long row spray rod with high pressure nozzle (number of nozzle 13), suction nozzle body and the road surface follow. Hydraulic drive electrical automatic control suction nozzle lifting, spring floating suspension. | |||||||||
| The diameter of the straw | 2 Xφ180mm of two roots | ||||||||||
| Rigid partial ground clearance during operation | 5-10mm | ||||||||||
| Left and right spray rod | Spitcher swing | Cylinder driven, electrical automatic control, swing angle 78° | |||||||||
| The spray rod is off the ground height | With the suction nozzle with the suction wheel and the road surface, from the ground height 280mm | ||||||||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}