China 15ppm Bilge Alarm Device for Oily Water Separator
China 15ppm Bilge Alarm Device for Oily Water Separator :
OCM-15 type 15ppm bilge water alarm device:
It has four 20mm filling holes and two 16mm filling holes, which the
cable takes in and reaches the wire terminal from bottom to the top. The main wire terminal of the device allows connecting the wire of 2.5 sectional areas, and it is suggested to use the wire of 0.5-1.
A power supply of 110 to 220 VAC is available for OCM-15 type 15ppm bilge water alarm device. Only one of the power supply should be chosen while installation. Data processing board is in the control case.
.The 15ppm device wiring details will vary dependent upon the control system to be employed but the most frequently used systems employ alarm relay 1 for alarm only and alarm relay 2 for control purposes.
Technical Features of 15ppm Bilge Alarm Device for Oily Water Separator :
Type: OCM-15
Range: 0 - 30 mg/l can exceed to 50mg/lohm
Accuracy Better than 5mg/l
Linearity better than 2 %
Display LCD display
Power Supply: 220VAC/110VAC ± 10%
Consumption: 10 VA
Alarm Points: 1-15ppm
Alarm Points works set: 15ppm
Alarm 1 delay 0-10 second.
Alarm 2 delay 0-10 second
Alarm output Two way relays output
Alarm relay output contact value 5A, 250VAC
Alarm relay output feedback signal test Two way working status contact testing
Alarm Indication: Red LED's
Output Signal: 4 - 20 mA, reversible Ri < 500
Sample Water Pressure: 0.01 -6 bar
Sample Flow: approx. 0.2 - 4 l/min depend on pressure
Ambient Temperature: 0 to + 55° C
Sample Water Temperature: + 1 to + 80° C
Size (over all): 360 mm W x 240 mm H x 105 mm D
Degree of Protection: IP 45
Weight: 8kg
Pipe Connections: R 1/4" Female
Standard IMO.Res.MEPC.107(49)
Audited Supplier 
){kind=link}
){kind=link}