The models SUDH80, SUDH100, SUDH125, SUDH160 semi-universal dividing heads respectively have the center height as 80mm, 100mm, 125mm, 160mm and are the most important attachments for milling machines. With the help of these dividing heads, direct indexing and simple indexing can be performed on the workpiece and the workpiece and be rotated to any angles as desired.
The operation handle of model SUDH80 is set on the left, and the operation handles of SUDH100, SUDH125, SUDH160 are set on the right.
Specifications |
SUDH80 |
SUDH100 |
SUDH125 |
SUDH160 |
Center height, mm |
80 |
100 |
125 |
160 |
Swivel angle of spindle from its horizontal position (upward), Deg |
≤90 |
≤90 |
Swivel angle of spindle from its horizontal position (downward), Deg |
≤6 |
≤5 |
Rotating angle of spindle responding to one revolution of handle, Deg |
9 (540 grad., 1 each) |
Min. reading of vernier, Sec |
10 |
Worm gear ratio |
1:40 |
Taper of spindle bore |
MT3 |
MT4 |
Width of positioning key, mm |
14 |
18 |
Diameter of short taper of spindle nose for mounting flange, mm |
36.541 |
41.275 |
53.975 |
53.975 |
Number of holes on indexing plate |
1st plate |
24, 25, 28, 30, 34, 37, 38, 39, 41, 42, 43 |
2nd plate |
46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66 |
Individual indexing error of the spindle for one revolution of handle, Sec |
60 |
±45 |
Cumulated error at any 1/4 periphery of spindle, Min |
70 |
±1 |
Max. load capacity, Kgf |
80 |
100 |
130 |
130 |
Net weight, Kgs |
26 |
57 |
83.5 |
100 |
Gross weight, Kgs |
32 |
69 |
96 |
114 |
Packing size (LXWXH), cm |
48X36X22 |
61X46X26 |
54X46X31 |
71X50X34 |