Casting Runner Brick For Iron Insustrial
The description:
Clay brick for ingot casting refers to the clay brick commonly used in the whole process of introducing molten steel from the steel drum to the ingot mold. It includes steel drum lining bricks and steel casting bricks (in which sleeve bricks, plug bricks, water position bricks, seat bricks, shaped pipe bricks, management center cast pipe bricks, management center bricks, flow steel bricks, flow steel tail bricks, ingot mold bottom bricks). The initial key selection of plastic method (moisture 16-20%) production of ingot clay brick. After the 1950s, marketing promoted the semi-dry production of ingot clay bricks. Compared with the two production and manufacturing methods, the semi-dry production and manufacturing process is less, the high temperature characteristics of handicrafts are good, the specifications are accurate, and the production and manufacturing cost is low, so the semi-dry production and manufacturing of ingot clay bricks are selected all over the world.
Technical Index:
Items |
Runner Brick |
Sleeve |
Alumina |
Clay |
BM-60R |
BM-C60R |
HL-32R |
BM-60V |
BM-50V |
HL-32V |
Refractoriness ºC ≥ ≥ |
37 |
37 |
32 |
37 |
36 |
32 |
B.D g/cm3 ≥ |
2.5 |
2.45 |
1.9 |
2.4 |
2.15 |
1.9 |
Apparent porosity % ≤ |
23 |
21 |
20 |
23 |
22 |
20 |
CCS ºC ≥ |
35 |
40 |
30 |
35 |
30 |
30 |
RUL ºC ≥ |
1500 |
1500 |
1300 |
1450 |
1400 |
1300 |
Thermal expansion≤ |
0.6 |
0.5 |
0.5 |
0.6 |
0.6 |
0.5 |
AL2O3≥ |
63 |
60 |
34 |
63 |
51 |
64 |
Fe2O3 ≤ |
2 |
2 |
2 |
2 |
2 |
2 |
Product feature:
Flow steel bricks are usually rectangular hollow clay bricks with various specifications. In order to reduce the friction resistance in the whole process of liquid steel flow and avoid steel leakage, it is stipulated that the inner holes of flow steel bricks are smooth, the appearance design is neat, and the joints are firm. The flow steel brick is the application of hollow corundum brick connecting the steel brick and the ingot mold in the pipe groove of the ingot base plate, and the related refractory brick, alias Tang road brick.
Flow steel bricks are used in a variety of alloy structural steels (including stainless steel plates, carbon steel) for tablet casting steel. The product has high fire resistance, strong fragmentation resistance and strong adhesion resistance. Neat appearance, smooth passageway, precise specifications, high quality. Production of ladle lining bricks, curved lining bricks, fired and unfired plug head bricks, cast brick, seat brick and sleeve brick for casting steel parts in ladle.
Ladle lining brick
Technical characteristics of clay lining bricks in steel drums: the high temperature molten steel is poured into the drum, and the lining is subjected to large erosion and thermal shock effect and the organic chemical deposition of molten steel and slag in the drum. Therefore, clay lining bricks should have low residue, dense and accurate appearance specifications, and obtain higher thermal physical properties than ordinary clay bricks when fired at high temperatures
Sleeve brick
It is characterized by heat shock resistance, low thermal conductivity, no cracking in the whole process of pouring steel, no broken rod.
Plug head brick and water position brick
The brick is located at the throat of the ingot, which is eroded by the vortex of molten steel, and the corrosion is the most severe, so the quality of the brick is maximum.
Company main products and profile:
Why choose us?
Zhengzhou Kaiyuan Refractories Co., Ltd is a manufacturer of silicon-aluminum refractory (fireclay brick, high alumina brick, silica brick, mullite brick, corundum brick, insulation brick, castable, mortar) for coke oven, blast furnace, hot blast stove, heating furnace, anode baking furnace, boilers and other industrial furnaces for 20 years located in Henan, China.
Our total annual production capacity is about 100,000 tons of dense-shaped refractory product, and 100,000 tons of monolithic refractory product.
We have three tunnel kilns for silicon-aluminum dense bricks and one new plant for the monolithic refractory.
We're sure our custom-made products and professional services will bring you a stable quality supply and more profit.
Our Laboratory and R&D Center
We have test equipment for the following items:
chemical %
bulk density
apparent porosity
cold crushing strength
modulus of rupture
refractoriness under load
creep
thermal expansion
Reheat linear change
thermal shock resistance
thermal conductivity
Contract Kiln Construction
FAQ
1. Are you a Manufacturer or trader?
A: We are manufacturer and our plant is located in Xinmi city, Henan, China
2. Can we visit your company?
A: You are warmly welcome to visit our company at anytime, you'll not regret of the visiting.
3. Do you accept OEM?
A: Yes, we do OEM.
4. What's the MOQ of trial order?
A: We care about all the potential customers and take all the trails orders.
5. What is the payment term?
A: TT, LC, DP, DA.
6. How long is the delivery time?
A: Usually within 35 days after down payment.
7. Do you accept third party inspection ?
A: Yes for sure, we accept the third party inspection before delivery.
8. What is your after-sell service?
A: The rejected goods can be replaced or we can make compensation for it. We can send technical engineers to the end user for technical issue.
9.What is your company's certification?
A: ISO9001 certificate