Basic Info.
Standard
DIN, ANSI, GB, JIS, BSW
Material
Medium Carbon Steel
Surface Treatment
Plated Copper
Transport Package
Wooden Box
Specification
102mm-1800mm
Product Description
Strengths of expansion joint:Small size, lightweight, easy to install and maitain, good performance, and with different color, different material quality.
2 | Lining | Nylon cord fabric |
3 | Frame | Hard steel wire |
4 | Flange | Mild steer |
Schematic DiagramModel | KXT-( I ) | KXT-( II) | KXT-(III) |
MPa(kg.f/cm') Working pressure | 2.0(20) | 1.2(12) | 0.8(8) |
MPa(kg.f/cnr) Bursting pressure | 6.0(60) | 3.5(35) | 2.4(24) |
MPa(kg.f/cnr) supporting flange | 1.6(16) | 1.0(10) | 0.6(6) |
Vacuity KPa(mmHg) | 100(750) | 86.7(650) | 53.3(400) |
Applecable tenip.°C | 2080°C () +80135°C ( |
Applecable media | ,Air.Compiessed air. Water Sea Water.Hot Water.Weak acid.Etc |
,.Both ends of the joint can be arbitray deflected for free adjustment of axial or lateral displacement |
:DN200.300KXT. 1.5 MPa(l 5kgf/cm') 4.5MPa(45kgf/cm:)80°C,135°C,,,. .Note:The working pressure of Model DN200-300KXT-( 1 )IS 1. 5KIPa( 15kgi7cm:)and the bursting pressure is 4.5 MPa(45kgi7cm )Ordinary type products can only be used under 80°C. if temperature is higher than 135°C, please show clearly,ingredient of the rubber will be changed. Restricting pull rod is necessary , when pressure is high and impulse is great.,, Table of Main Parameter of Nominal Core Diameter, Length, Displacement Value and FlangeNominal core diameter DN | Leigth (mm) | No.of bolt ii | Diameter of bolt hole doGnm) | Diameter of bolt liole center circlen DI (mm) | Axial displaceninent (mm) | Lateral displacement (mm) | Angie of deflection (a l + a 2) | installation space Wmm |
(mm) | ( in) | Strcch | Compression |
20 | (3/4) | 95 | 4 | 17.5 | 100 | 6 | 9 | 9 | 15° | 4 |
25 | (1) | 95 | 4 | 17.5 | no | 6 | 10 | 9 | 15° | 4 |
32 | (11/4) | 95 | 4 | 17.5 | 100 | 6 | 9 | 9 | 15° | 4 |
40 | (H/2| | 95 | 4 | 17.5 | no | 6 | 10 | 9 | 15° | 4 |
50 | (2) | 105 | 4 | 17.5 | 125 | 7 | 10 | 10 | 15° | 4 |
65 | (21/2) | 115 | 4 | 17.5 | 145 | 7 | 13 | 11 | 15° | 4 |
80 | (3) | 135 | 8 | 17.5 | 160 | 8 | 15 | 12 | 15° | 4 |
100 | (4) | 135 | 8 | 17.5 | 180 | 10 | 19 | 13 | 15° | 4 |
125 | (5) | 165 | 8 | 17.5 | 210 | 12 | 19 | 13 | 15° | 4 |
150 | (6) | 180 | 8 | 22 | 240 | 12 | 20 | 14 | 15° | 5 |
200 | (8) | 200 | 8 | 22 | 295 | 16 | 25 | 22 | 15° | 5 |
250 | (10) | 230 | 12 | 22 | 350 | 16 | 25 | 22 | 15° | 6 |
300 | (12) | 245 | 12 | 22 | 400 | 16 | 25 | 22 | 15° | 6 |
350 | (14) | 265 | 16 | 22 | 460 | 16 | 25 | 22 | 15° | 7 |
400 | (16) | 265 | 16 | 26 | 515 | 16 | 25 | 22 | 15° | 7 |
450 | (18) | 265 | 20 | 26 | 565 | 16 | 25 | 22 | 15° | 7 |
500 | (20) | 265 | 20 | 26 | 620 | 16 | 25 | 22 | 15° | 8 |
600 | (24) | 265 | 20 | 30 | 725 | 16 | 25 | 22 | 15° | 8 |
700 | (28) | 260/320 | 24 | 30 | 840 | 16 | 25 | 22 | 10° | 8 |
800 | (32) | 260/340 | 24 | 33 | 950 | 16 | 25 | 22 | 10° | 8 |
900 | (36) | 260/370 | 28 | 33 | 1050 | 16 | 25 | 22 | 10° | 8 |
1000 | (40) | 260/400 | 28 | 36 | 1160 | 16 | 25 | 22 | 10° | 8 |
1200 | (48) | 260/420 | 32 | 39 | 1380 | 18 | 26 | 24 | 10° | 9 |
1400 | (56) | 300/450 | 36 | 42 | 1590 | 20 | 28 | 26 | 10° | 9 |
1600 | (64) | 300/500 | 40 | 48 | 1820 | 25 | 35 | 30 | 10° | 9 |
1800 | (72) | 500 | 44 | 48 | 2020 | 25 | 35 | 30 | 10° | 10 |
2000 | (80) | 550 | 48 | 48 | 2230 | 25 | 35 | 30 | 10° | 10 |
2200 | (88) | 580 | 52 | 56 | 2440 | 25 | 35 | 30 | 10° | 10 |
2400 | (96) | 610 | 56 | 56 | 2650 | 25 | 35 | 30 | 10° | 10 |
:1,GB9119PN1.0MPa, GB/T9115.1-2000(RF), ,,.3,(N 700) .4,DN 200, ,.Note: l.Flaiige staiklard is GB 9119 PN1.0MPa;The matching flange should be valve flange or otlier flanges accorduig with GB/T9115.1 -2000(RF), The installation space refers to tlie gap behveen soft joint flange and pipe flange and it slioiild be maintained luiifbnn to avoid pulling or shedding 2. For flanges of otlier standards or non-standard , it is necessaiy to be agreed upon sepaiately.please specify standard of fiiniish diagiam and relative paiainetei; we will manufacture accordingly. 3.spherical products witli wide flanging are suggested wlien inside nominal diameter is greater than or equal to 700. 4.Use those products exceeding DN200 vvliile tliey need water supported by liangiiig in tlie ail; pipeline nnist be fixed witli support or bracket, otherwise, products should be fit with anti pull or anti shed devices.
Address:
Zhonglong Town, Rizhao, Shandong, China
Business Type:
Trading Company
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Service, Transportation
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.