Zhengzhou Fude Machinery Equipment Co., Ltd. is a professional enterprise engaged in the research and development and production of equipment such as wood crushers, template crushers, mobile comprehensive crushers, sawdust machines, biomass pellet machines, etc. Not only has the production technology and product quality and appearance been improved, but also a large amount of experience has been accumulated. Based on fair prices, excellent production, comprehensive after-sales service, we have won praise from domestic and foreign customers.
The branch crusher is a fast, affordable, and wood crushing and processing equipment. The appearance of the finished product can be freely adjusted from sawdust, granular to flake shape. The wood crusher can process pine, miscellaneous wood, poplar, fir, and raw bamboo. Due to its compact structure, small footprint, good cutting quality, low power consumption, and suitable for mobile operations, the branch crusher is suitable for the material preparation section of small and medium-sized particle board and fiberboard production enterprises, and can also be used for the production of commercial wood chips by individual households.
Product Advantages
1. The branch crusher can produce biomass burning particles from trimmed leaf branches, which can be used as new fuel for fryers, thermal power plants, household heating, and more.
2. The sawdust after being crushed by a branch crusher can be used to cultivate edible mushrooms, which can increase the mushroom yield and increase the maximum yield by 3.2 times.
3. The branch crusher crushes the sawdust particles from the pruned wood branches into organic fertilizers and cultivates other trees.
The structure, operating principle, and characteristics of the mobile branch crusher:
1. Mobile branch crusher Mobile green dedicated crusher Connect the power and check if the steering is correct.
2. When replacing the cutting tool, the blade extends 2-4mm beyond the flat surface of the cutting disc, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent damage to the sliding disc nut.
3. To change the extension and retraction of the knife, the length of the extension must be consistent
4. By adjusting the length of the blade, when the particles cannot reach the desired size, replace them with different aperture sieves
5. It is strictly prohibited to throw wood with stones and nails into the machine to prevent damage to the knives and internal parts.
6. Pay attention to checking the hammer bolts. If any looseness is found, tighten them immediately. When the hammer and bolts are severely worn, they should be replaced
7.The grinding angle is a straight line of 28-30 °, and it is strictly prohibited to grind it into a convex surface. The convex surface may cause the steel blade to detach or partially peel off the steel
8. Frequently used machines should be checked for a lack of bearing grease. The fine particles should enter the powder collector for collection with the airflow for 3-4S, while the coarse particles should enter the centrifugal chamber for further crushing until they reach the desired fineness.
Product usage scenarios
Scene diagram of equipment shipment and shipment |
FAQ
Q:Are you a trading company or a manufacturing factory?
A:We are a factory.
Q:What is your delivery time?
A:If the goods are in stock, it usually takes 7-10 days. If the goods are out of stock, it will take 15 to 30 days, calculated by quantity.
Q:What is your payment method?
A:30% of the total price should be paid in T/T as the down payment; 70% of the remaining payment should be paid in T/T before delivery.
Q:Do you provide technical guidance?
A:Yes, we will provide you with professional advice on theselection of models and the operation of equipment.