Basic Info.
Transport Package
Carton Packing
Product Description
Product Description
Blow Off Adaptor VAG for Volkswagen for Audi 710D FSiT TFSi Blow off valve train BOV Blow dump kit
BRAND NEW !! For AUDI/VW 2.0T FSI AND TSI ENGINES
If you are not sure if this will work for your vehicle please contact us we will help you,
also if you need any help with installation will walk you through the process.
Sandwich type adapter that fits between the existing electrical solenoid and the turbo charger housing. On the 2.0 FSiT TFSi turbo, built into the turbocharger housing, is a
bypass facility. This allows charge air to be recirculated around the turbo charger from the boost side back to the intake side. This re-circulation path is opened and closed by means of an electrical connection from the engine management to a solenoid that is mounted on the turbocharger housing. As you accelerate , the turbo charger vanes are spinning and boost pressure is increased, literally blowing into the engine cylinders. While you change to a higher gear the throttle valve to the engine closes. The problem here is that during this process the turbo is still spinning and the boost pressure that it is producing has no where to go. (This is a bit like putting you hand over a hair dryer so the air cannot get out) What happens at this point is the turbo starts to stall, the spinning vanes slow down and the boost pressure drops. When the throttle valve opens again the turbo has lost its momentum, boost pressure and there is a pause or a "Lag" before the engine is producing the required power once again. To combat this loss of power and stress on the turbo, a re-circulation or diverter valve is used. When the throttle valve closes, the engine management opens the re-circulation route around the turbo. This gives the charge air an alternative route and allows the turbocharger to keep spinning so that when you accelerate again there is no "lag" or waiting period. This system works well and is adopted by nearly all vehicle manufacturers on turbo charged petrol engine applications. The only downside to this system is that a turbo chargers produce heat. By recirculating the hot air back into the intake side of a turbo the temperatures increase. This is where the Blow Off or Dump valve plays its part. By expelling the charge air to atmosphere rather than recirculating it, you do not increase the intake air temperature but you do allow the turbo to keep spinning. The side effect which is unacceptable to most vehicle manufacturers is the noise of the valve expelling the air. By fitting the adapter between the existing solenoid and the turbo housing (this involves removing only 3 bolts) the air is re-directed to atmosphere rather than recirculated.
Please note:
For the twin charged 1.4 engine (Turbo and Supercharger) please see FMDV14TSi
Fits:
For VW and Audi 2.0L FSI and TSI engines with for Bosch ME9 engine management systems.
NOT ALL VEHICLE ARE LISTED ON THIS LIST JUST A FEW.
For VW Golf MK5 2.0 FSI Turbo - 2005 - 2008
For VW Golf MK6 2.0 TSI Turbo - 2008 - Present
For VW Bora / Jetta 2.0 FSI Turbo - 2005 - 2010
For Audi A3 8P 2.0 FSI Turbo - 2003 - Present
For Audi A4 B7 2.0 FSI Turbo - 2005 - 2008
For Audi A4 B8 2.0 TSI Turbo - 2008 - Present
For Audi TT 8J 2.0 FSI Turbo - 2006 - Present
For Seat Leon MK2 2.0 FSI Turbo - 2005 - Present
For Seat Leon Cupra 2.0 FSI Turbo - 2006 - Present
For Seat Altea 2.0 FSI Turbo - 2004 - Present
For Seat Toledo 2.0 FSI Turbo - 2004 - 2009
For Skoda Octavia 2.0 FSI Turbo VRS MK2 1Z - 2004 - Present
For VW Passat 2.0 FSI Turbo B6 B7 - 2005 - Present
For Audi A6 C6 - 2004 - 2011
For VW Tiguan 5N - 2007 - 2008
For VW CC TSI 2009 - Present
Package including:
1 Set Blow off valve Adaptor with Bolts .(100% Brand New Never Used Or Installed)
All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended.
There are no installation guides provided with this item, we highly recommend
Address:
Room 809, No., 488, Lv Yuan Ld, Huangdu, Anting Town, Jiading District, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories
Company Introduction:
Shanghai SA Auto Parts Co., Ltd. is a manufacturer of performance & Racing parts, such as Hydraulic Handbrake, Blow off Valves, Oil Cooler, An Fittings, Exhaust Cutout, Oil Catch Can, Band Clamp, Muffler, Air Filter, Flexible Pipe, Aluminum Pipe, Muffler, Silicone Hose, Throttle Body with well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in racing and other industries. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!