Print This Page

Home Metallurgy, Mineral & Energy Non-ferrous Metal & Products Copper

Bimetallic Copper to Aluminum Rod Bus Bar pictures & photos

Bimetallic Copper to Aluminum Rod Bus Bar

Type:	Copper Bars
Application:	Air Condition or Refrigerator, Water Tube, Oil Cooler Pipe
Alloy:	Alloy
Standard:	GB/T
Cladding Rate:	100%
Copper Aluminum Ratio:	20/80

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Henan Chalco Aluminum Fabrication Co., Ltd.

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Manufacturer/Factory, Trading Company

Product Description

Company Info.

Basic Info.

Proportion

45/55

Density

3.94

Transport Package

Export Standard Wooden Pallet

Specification

According to Customer Requirement

Trademark

Chalco Aluminum

Origin

Henan China

HS Code

7419999100

Production Capacity

10000mt/Month

Product Description

Bimetallic Copper To Aluminum Rod Bus Bar

Although both copper and aluminum have good conductivity and thermal conductivity, they are the basic materials for power transmission and heat transfer engineering, but copper resources are increasingly scarce, so replacing copper with aluminum has become an inevitable trend.

Compared with copper, aluminum has poor weldability and high surface contact resistance, so it is difficult for many parts to replace copper with aluminum directly.

Aluminum-copper composite prepared by directly compounding a layer of copper on the surface of aluminum can improve the contact resistance of aluminum surface, improve the welding performance of aluminum and the corrosion resistance of copper-aluminum contact.

Specifications for bimetallic copper to aluminum rod bus bar:
1. width: 30-200mm
2. thickness: 3-12mm
3. copper aluminum ratio: copper 20%, aluminum80%
4. adopt the standard: DL/T247-2012
5. copper aluminum grade: T2 copper copper content is more than 99.95%.
1070 aluminum - aluminum content greater than 99.85%

6. state: annealing state & hard state

Bimetallic copper to aluminum rod bus bar	Parameter
Copper aluminum ratio	20:80
Proportion	45:55
Density(g/cm3)	3.94
DC electric resistance(Ω.mm2/m)	≤0.02488
Tensile strength(MPa)	≥110
Elongation(%))	≥7
Bonding strength(MPa)	>40

Note: Bimetallic copper to aluminum rod bus bar can be manufactured according to user's
width and thickness.

The advantages of bimetallic copper to aluminum rod bus bar are:

1. Good electrical conductivity: Copper-aluminum volume ratio of 15% copper-clad aluminum plating performance, compared with copper bars, its AC current carrying capacity is 85% of pure copper.

2. Light weight: the density of bimetallic copper to aluminum bars is only 37% - 40% of pure copper bars, the length (volume) of the same weight is 2.5-2.7 times of pure copper bars.

3. Good mechanical properties: good tensile strength, flexibility and elongation.

4. Firm bonding between copper and aluminum: two different metal materials achieve permanent atomic intergranular bonding at various ambient temperatures, and the copper layer (tin, zinc layer) is evenly distributed without any physical defects.

5. Good ductility and reliability: After a special heat treatment process, it has certain plasticity, which is conducive to punching, shearing, bending products without cracking, not separating. In order to improve corrosion resistance, tin plating and zinc plating can be applied on the surface of copper layer.

6. Optimum Selection: Save copper, greatly reduce the cost of supporting production, green environmental protection, no pollution.

Application area:

Bimetallic copper to aluminum rods are used in connection posts of high-voltage distribution stations; Bimetallic copper to aluminum bus bar is used in chemical industry instead of copper busbar for saving.
Bimetallic copper to aluminum bus bar are often used as important components in heat exchanger manufacturing, power transmission and electrical equipment. For example, switchgear, control cabinet, transformer, safety switch, vacuum switch, relay system, motor control, track power supply system, electrode correction coil, reactor and other windings, railway traction equipment, high and low voltage distribution cabinet, generator set and substation, all kinds of copper-aluminum transition connectors, high and low voltage distribution point cabinet conductive row, High and low voltage bus bar, bus bar, touch slide line and so on.
Bimetallic copper to aluminum rod bus bar are often used in the conductive industry for the transition connection between copper and aluminum, such as motor, Transformer Outlet contact plate and power fittings, power plant and substation copper bus and aluminum bus transition connection.

Send your message to this supplier

*From:

*To:

*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for?  Post a Sourcing Request Now

Find Similar Products By Category

Supplier Homepage Products Aluminum Bimetal Copper and Aluminum Busbar Bimetallic Copper to Aluminum Rod Bus Bar

Hot Searches

Bimetallic Copper to Aluminum Rod Bus Bar bulkbuy

Product Groups

More Product Catalogs

Contact Supplier

Contact Now

Inquiry Basket

Henan Chalco Aluminum Fabrication Co., Ltd.

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Manufacturer/Factory, Trading Company

Registered Capital

3000000 RMB

Plant Area

101~500 square meters

Bimetallic Copper to Aluminum Rod Bus Bar

Contact Supplier

Product Description

Company Info.

Basic Info.

Product Description

Send your message to this supplier

Find Similar Products By Category

Hot Searches

You Might Also Like

Product Groups

Contact Supplier