Basic Info.
Model NO.
LOCTITE FREKOTE 770-NC
Usage
Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
Cure
Room Temperature Cure
Cured Thermal Stability
≤400 °c
Application
Release Coatings
Application Temperature
15 to 60 °c
Transport Package
Wooden Box
Specification
Solvent Based Polymer
Product Description
LOCTITE® FREKOTE 770-NC
Product Description
PRODUCT DESCRIPTION LOCTITE® FREKOTE 770-NC™ offers excellent release for
various molding applications. LOCTITE® FREKOTE 770-NC™
can be used for the release of epoxies, polyester resins, vinyl
ester resins, thermoplastics, adhesives, and rotationally molded
plastics. This product is particulary well suited for tougher to
release processes such as filament winding and non gel coated
polyester and fiberglass molding. TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 0.715 to 0.725
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or
oxygen rich systems and should not be selected as a sealant
for chlorine or other strong oxidizing materials.
Storage
The product is classified as flammable and must be stored in
an appropriate manner in compliance with relevant regulations.
Do not store near oxidizing agents or combustible materials.
Store product in the unopened container in a dry location.
Storage information may also be indicated on the product
container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
cannot assume responsibility for product which has been
contaminated or stored under conditions other than those
previously indicated. If additional information is required,please
contact your local Technical Service Center or Customer
Service Representive.
Conversions
(°C x 1.8) + 32 = °F kV/mm x 25.4 = V/mil
mm / 25.4 = inches µm / 25.4 = mil
N x 0.225 = lb N/mm x 5.71 = lb/in
N/mm² x 145 = psi MPa x 145 = psiN·m x 8.851 = lb·in N·m x 0.738 = lb·ftN·mm x 0.142 = oz·in mPa·s = cP Note:(1)
The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the
product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control.
Note:(2)Henkel is,therefore, not liable for the suitability of our product for the production processes and conditions in respect
of which you use them, as well as the intended applications and
results. We strongly recommend that you carry out your own
prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding
the concerned product is excluded,except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable
mandatory product liability law.
Product Parameters
PRODUCT DESCRIPTION |
Technology | Mold Release | Appearance | Clear, Colorless |
Chemical Type | Solvent Based Polymer | Odor | Mild, Solvent |
Cure | Room temperature cure | Cured Thermal Stability | ≤400ºC |
Application | Release Coatings | Application Temperature | 15 to 60ºC |
Specific Benefit | No contaminating transfer | High gloss finish | High slip |
No mold build-up | Low odor | |
Physical and chemical properties |
Physical state: | liquid | Evaporation rate: | Not available |
pH: | Not available.Product is non polar/aprotic. | Melting point: | Not determined |
Boiling point: | > 112ºC(> 233.6ºF) | Density: | 0.72 g/cm3 |
Vapor density: | 3.9Approximately, (Air = 1) | Vapor pressure: | Not available. |
Flash point: | 7 °C (44.6 °F) | Ignition temperature: | > 284 °C (> 543.2 °F) |
Application
Our Advantages
Why Choose Us?
1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .
2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.
3.Corporate With World Famous Brand, Quality Assured, Cost Effective .
4.Professional And Strong Technical Support.
5.Full Line Nouryon Brand Peroxides
6.Hot Chemicals, Short Of Supply Chemicals, We Have .
7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
Production Process
Company Profile
Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.
We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.
Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.
Certifications
FAQ
1. Q: Is your company a manufacturer?
A: Yes,we are. At the same time, we are also agents of other product brands.
2. Q: Does your company provide samples?
A: Yes,we can provide 100g and 200g for additive and 500g/1kg for resin as free samples, but freight usually requires the buyer to bear.
3. Q:What is your company's transportation form?
A: Samples generally deliver by international express, a large number of goods can be transported by land or water.
4: Q: What is the quality and price of your product?
A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .
5. Q: How many days the clear phenolic epoxy resin could sotre ?
A: 12 months below 25ºC in dark.
Address:
Room 807, Building 5, 1590 Longjin Road, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals
Company Introduction:
Since its foundation in 2013, Evergreen Chemicals has established itself as the one-stop solution provider of the composite materials in the national and international market. Evergreen Chemicals keeps developing relationships with top manufacturers and raw materials suppliers around the world.
We are very popular with our customers not only because of our fast delivery time( we promise fastest delivery time than any other factory), most professional &efficiency danger-ous goods export team, most powerful custom clearance capability( can export to every corner of the world), but also because we are world famous brand partner like NOURYON(AKZONOBEL), INOES(ASHLAND), AOC(DSM), SWANCOR, NANYA, HUNTSMAN, CHEMTREND, JUSHI, EVONIK, , BYK, HANKEL, TOSOH, UNITED INITIATORS.
Lt owns scientifc and complete management system to assure the high quality products and o-time delivery rate. Evergreen always focus on clients and delivery performance. We are able to react quickly, competently and efficiently to the individual wishes and requirements of our customers.