Automatic Powder Coating Equipment for Sale HOT SELL IN MEXICO
Automatic powder coating equipment is designed for continuous production in powder coating, this powder coating equipment features reliable in automated operation, easy to control operation and security. Includes the central control cabinet, COLO-191S automatic powder spray gun and COLO 2200D powder coating reciprocator.
COLO-191S Automatic Powder Coating Gun and Cabinet
1. Advanced model, digital valve control technology, precise regulate of powder output for uniform coating, achieves highest quality finish comparing with traditional models.
2. Individual adjustment of voltage, current on the digital controller in accurate values, meets the demands of coating any products, even most complex shapes with dead corners.
3. The self-developed COLO-08 auto spray gun with built-in 100kv cascade allows powerful and longlasting jobs, high transfer effciency and a grea saving powders.
4. Combined with booth and conveyor system, the number of installed control units as requirements. Central control for the all the gun reliability, controllability.
Specifications of COLO-191S Powder Coating Gun
Voltage |
AC 220V / 110V |
Frequency |
50-60Hz |
Power |
50W |
Output Voltage |
DC 24V |
Max Voltage |
0-100 KV adjustable |
Max Powder Injection |
600 g/min |
Max input air pressure |
10 kg/cm |
Optimum input-air pressure |
6 kg/cm |
Minimum input-air pressure |
4 kg/cm |
Maximum water vapor content or compressed |
1.4 g/Nm3 |
Maximum oil vapor content of compressed air |
0.1 ppm |
Maximum compressed -air consumption |
13.2 m3/h |
Temperature Range in Use |
-10 ºC-50 ºC |
Maximum Output Current |
180μA |
Polarity |
negative |
COLO-2200D Automatic Powder Coating Reciprocator
1. Precise speed, stroke and position you can set on the PLC controller by touch screen. could store 20 programs, different languages for choice.
2. Mechanical components using linear rail guide, scroll up and down with a belt drive. This straight track features smooth jitter-free operation, low noise and less wear-resistance.
3. High-precision position sensor output coded signal to the circuit board for high-speed processing, and thus the upper and lower pivot point lift is stepless adjustment controlled.
4. Carry up to 12 pcs spray gun with high stability, both applied to powder coating or wet painting.
Specifications of COLO-2200D Powder Coating Reciprocator
Model |
COLO-2200D |
Power Supply |
AC 220V/110V 50-60hz |
Motor Power |
1.1kw |
Speed |
0-0.8 m/s (0-50 m/min) |
Acceleration |
1 m/s |
Max. Loading Capacity |
25kgs |
Controller |
PLC with touching screen |
Motor |
Frequency Adjustable |
Stroke |
1.5m/2m/2.5m |
Warranty |
1 years |
Company
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price. Meanwhile our engineer is available to supply support abroad to our customer.