Rated Voltage: | AC220V±10% 50Hz |
---|---|
Power: | 150W |
Temperature Control Made: | Program Temperature |
Ignition Mode: | Electronic Ignition(No Need Gas Source) |
Ambient Requirement: | Temperature: 20~30°c, Humidity≤85%. |
Transport Package: | Wooden Case |
Customization: |
---|
Suppliers with verified business licenses
HK-261B Automatic Pensky-Martens Closed Cup Flash Point Tester
Overview
HK-261B Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8mm 2/s (cSt) or more at 37.8ºC or 9.5mm 2/s (cSt) or more at 25ºC (77ºF), or that contain suspended solids, or have a tendency to form a surface film while under test. Other classification flash points have been estabilished by these departments for liquids using these test methods.
Features
1.Touch screen control, it can connect to the computer
2.Indenpendent heating module with monitoring interface, it follows the standard requirement to heat
3.Automatic ignition,flash point detecting alarm, calculate, print, record and air cooling
4.Standard reagent calibration:According to the standard, there are procedure A and procedure B
Technical Parameters
1.Rated voltage: AC220V±10% 50Hz
2.Power: 700WScreen: 4 wires resistor touch screen
3.Ignition: Gas ignition
4.Printing method: Thermo printer
5.Repetitive error: ±1ºC
6.Ambient requirement: Temperature: 10~40ºC; Humidity≤85%
Suppliers with verified business licenses