Automatic Big Type Floor Cleaning Machine Industrial Floor Scrubber

1.The water tank made of high-strength polyethylene material is durable and does not fade;

2.The brush motor and the drive motor are linked, and the machine advances the brush to work, which reduces the operation steps of washing the ground;

3.The brush tray can bring up to 1100mm of clean area for higher cleaning efficiency;

4.Metal gear brush motor, higher transmission efficiency and longer service life;

5.Automatically loading and unloading the brush tray, reducing the time required for manual replacement of the brush tray, which can greatly improve work efficiency;

6.Two-stage bypass water-absorbent motor with strong suction and instant drying of the ground;

1.Propelling Motor,we use Amer, and the Suction Motor, we use AMETEK.

2.About Controller, we use PG, and for floor scrubber brush pan, our company is use Malish.

3.Lead acid maintenance free battery and so on.

4.Glue: Rubber Absorbent Strip: PU material oil absorbent adhesive strip, rubber material wear-resistant adhesive strip

Our floor scrubber is widly used in public places, such as hospital, underground garage, shopping mall, air port,and factory.

And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc.


Part IV: Datas of PBA900 floor scrubber

Each machine is put on a polywood pallet, then carton;

Wooden box or air bubble film and carton for plastic products or as your request.

Normally, for testing sample, we can arrange the delivery within 7 days;

Q:Why does the brush not turn?
A: Check that the brush master switch is on.

Q: Why is the machine running for a short time?
A: 1. A fully charged machine can operate for 3.5-4 hours.
2. Charge for at least 8 hours.
3. Please contact the after-sales center to solve the problem if it can not operate for 1.5 hours after being fully charged.

Q: Why does the charger not work?
A: 1. Connect the charger to the battery connector.
2. Plug the charger into the power supply.
3. The ammeter pointer should move and the charging lamp should flash.
4. If the above instructions are invalid, please contact the after-sales Center for solution.

Q: What is warranty of products?
A: All of products with one year guarantee of motors(non-artificial reason), any problem within one year,we will help to solve it.

Part VII: Our Company

After more than ten years of market development, we are committed to becoming the world's leading manufacturer and operator of comprehensive cleaning equipment. Such as ride on floor cleaning machine, Sweeper Machine, Manual Sweeper, Carpet Cleaning Machine, etc.. And these products sells well all over the country and is exported to more than 30 countries and regions in the world. With a global strategic vision, and with strong technical force and perfect market service system, it continuously expands domestic and international markets.