Atlas Copco OEM 2901021300 1613688001 Screw Air Compressor Parts Air Oil Separator

Atlas Copco OEM 2901021300 1613688001 Screw Air Compressor Parts Air Oil Separator

Oil separator 2901021300 is used for Atlas Copco Air Compressor

It uses the combination of high and low precision fiberglass filter paper, wound more than ten layers of fiberglass filter paper in the middle net as the main filter layer.
The oil mist in the compressed air is intercepted, collided, diffused and gathered. Small oil droplets quickly gather into large oil droplets, which pass through the polymerization layer under the push of pneumatic and gravity, and accumulate at the bottom of the filter element. Then, the oil return pipe inlet at the bottom of the filter element is returned to the lubrication system.
 

Replacement method of oil air separator

External models:

Stop the air compressor, close the air pressure outlet, open the drain valve, and after confirming that the system is pressure-free, remove the old oil and gas separator and replace it with a new one.

1. There is a safety valve on the end cover of the oil separation tank of the air compressor. When the air pressure in the oil separation tank reaches 1.1 times the set value, the safety valve will automatically open to release part of the air and reduce the air pressure in the oil separation tank. The method to check the safety valve is to gently pull the vent lever on the safety valve when the compressor is working at full load. If the safety valve can discharge outward, it is considered normal.

2. There is a pressure gauge on the oil separation tank to detect the pre-filter pressure. The bottom of the oil separation tank is equipped with a drain valve. The drain valve should be opened regularly to let off the water and dirt deposited on the bottom of the oil separation tank.

3. There is a transparent oil level mirror beside the oil separation tank to show the level of the oil separation tank. The correct oil level is when the air compressor is working normally, the oil level is in the middle of the upper and lower degrees. If it is too high, it will run away, and if it is too low, it will affect the safety of the whole machine.

4. The oil separation tank is produced by a professional manufacturer that must have manufacturing qualifications for pressure vessels.

       
        Filters are part of the air handling system and can provide the clean compressed air needed to remove oil and impurities. It can be used not only in pneumatic systems and pneumatic tools, but also in food, pharmaceutical and other industries. 

      Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.


 

 

Packaging & Shipping

 

Certifications

 

FAQ

 

Q: What is the online order minimum?
A: Currently our online order minimum is 1 pcs.
Q: Do you sell parts for engine driven portable air compressors too?
A: No, at this time we only carry parts for electric motor driven stationary compressors.
Q: What brands do you carry parts for?
A: We handle replacement parts for every major air compressor manufacturer such as Atlas Copco, Compair, Gardner Denver, Ingersoll Rand,  Kaeser, Quincy, Sullair, Worthington and many more. If you don't see your brand listed, just give us a call and we'll try to help locate your part.
Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.