CAS No.: | 61788-97-4 |
---|---|
Formula: | Mixture |
EINECS: | 500-033-5 |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Epoxy resin DL2119 can be cured under normal temperature and high temperature, with the feature of good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface.
1.DELY clear and transparent epoxy resin AB glue for table,floor ect. made from 100% epoxy resin and do well in adhesive.
2.Good at UV and yellow resistance,self leveling,without bubble,high brightness.
3.Can be cured at normal temperature or by heating.
4.Clear,low viscosity,nature defoaming, super transparency and good performance after mixed.
5.Can get any color you want by add pigments.
6.Easy to clean and repair.
Anti-yellowing UV stable Low VOC NON Toxic Crystal Clear Epoxy Resin | ||
Item | Epoxy Resin(A ) | Hardener(B) |
Color | Clear | Clear |
Specific gravity | 1.10±0.05g/cm3 | 0.97±0.05g/cm3 |
Viscosity (25ºC) | 2000±500mPa·s | 1000±300mPa·s |
Mixing ratio | A: B = 100:100(weight ratio) | |
Working time (25ºC) | 20~30min (100g) |
1.Weight Epoxy resin A and Hardener B glue according to the given weight ratio A:B by 1:1 into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
Anti-yellowing UV stable Low VOC NON Toxic Crystal Clear Epoxy Resin
--Transparent epoxy resin AB glue made from basic pure resin and do well in adhesive.
--Good at UV and yellow resistance,self leveling,without bubble,high brightness.
--Clear,low viscosity,nature defoaming, super transprency and good performance after mixed.
--Can get any color you want by add pigments,easy to work.
--Easy to clean and repair.
--Can be cured at normal temperature or by heating.
1,The operating environment of Epoxy resin should be ventilate and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
1. 250ML+250ML (16oz per set)
2. 500ML+2500ML (32oz per set)
3. 1L+1L (2L per set)
4. 5L+5L (10L per set)
Suppliers with verified business licenses