Air Cooled/Cooler Condenser with motor for cold room
Specification of Air Cooled Condenser for Freezer Refrigeration Parts Condensing Unit:
| Condenser type |
Fin Surface |
Diameter of copper pipe |
Fin space |
Cooling capacity |
Voltage |
| FNH Type |
2~180 sqm |
9.52mm |
2.2mm |
0.6 kW ~ 54 kW |
220v ~ 380v |
| FNV Type |
110~460 sqm |
9.52mm |
2.1mm |
36.3 kW ~ 151.8 kW |
220v ~ 380v |
- Detail of our Air Cooled Condenser for Freezer Refrigeration Parts Condensing Unit.
- Designed for ambient temperature of up to 52°C.
- It can be fitted to many compressors, Bitzer, Copeland, Tecumseh compressor.
- High pressure safety cut off with manual reset.
- Axial fan motor, high air flow with low noise.
- Air cooled condensing unit, high performance and convenient.
- Over 363 PSI dry nitrogen gas pressure test after completion of the piping circuit. no any leak.
- Installing of condenser is not confined by area ,it only needs small area.
- Condenser is entire installation,beautiful outlook design ,protect well ,can avoid collision damage
- Condensers have double arrangement,avoid heat loss during the air transform
- The condensers have good protection system inside ,good for reducing maintance
- Condenser use axial fan motor ,low noise ,power lose and large in air flowing
- Large power of compressors driver quantity of cooling capacity.
- Well construction ,convenient packing and transport for condenser.
1.we take very strict inspection for each product before shipping ,and the soldering by our professional and experienced workers ;
2.Casing material can be Galvanized sheet,Stainless Steel, Aluminum and Galvanized coating aluminum etc material .
Our workshop :
Package and shipping:
Contact with us:
){kind=link}
){kind=link}