Agricultural Glass Green house for Flowers with shading system
Glass greenhouse description
A)Glass greenhouse adopts hot-dip galvanized pipe skeleton, uses for more than 30 years , zinc layer more than 275g,the square pipe thickness 4.0 mm , strong structure .
B)The covering material is domestic premium float glass,4mm or 5 mm single tempered glass or 5+6+5 double hollow tempered glass covering , whose light transmittance is greater than 97%.
C)The roof and around use dedicated aluminum.
D) Stable ,strong structure ,anti- fog ,anti- drip ,anti - UV;
Glass greenhouse some skeleton specification
| No. |
Item name |
Specification
(Length*width*thickness)
|
Length (height) |
Material type |
Remark |
picture |
| 1 |
Main column |
120mm*120mm*4.0mm |
6m or cutomized |
Hot-dip galvanized steel pipe |
zinc layer 275 g |
|
| 2 |
Auxiliary column |
120mm*120mm*3.0mm |
6m or customized |
Hot-dip galvanized steel pipe |
zinc layer 275 g |
|
| 3 |
Truss beam |
50mm*50mm*2.5mm,height 700mm |
customized |
Hot-dip galvanized steel pipe |
zinc layer 275 g |
|
| 4 |
Gutter |
375mm*3.0mm |
customized |
Hot-dip galvanized steel pipe |
zinc layer 275 g |
|
Greenhouse some structure details
| Column and beam connection |
Top roof truss connection |
Gutter and column installation |
Greenhouse optional system
Fans and cooling pad
(1) The wet curtain fan forced cooling system uses the evaporative cooling principle of water to achieve the purpose of cooling.
(2)The heart of the cooling system is the pad that evaporates the water. The wet curtain is made of corrugated fiber paper. Due to the addition of special chemical substances in the production raw materials, it is resistant to corrosion and has a long service life.
(3)When the air passes through the wet pad medium, the sensible heat of the air is converted into the latent heat of evaporation, thereby realizing the humidification and cooling of the air. The fan is used in combination with the wet curtain, which can promote the flow of air inside and outside the greenhouse, discharge indoor high-temperature and high-humidity gas, and supply enough fresh air.
(4) When it is necessary to cool down, the fan (manual and automatic) is started to discharge the air out of the greenhouse to generate negative pressure; at the same time, the water pump hits the opposite wet curtain wall.
(5)When the outdoor air is sucked into the room by negative pressure, it will pass through the gap of the wet curtain at a certain speed, causing the water to evaporate and cool down. The cold air flows through the greenhouse, absorbs the indoor heat, and is discharged through the fan to achieve the purpose of cooling
Insulation system
(1)The glass greenhouse is composed of thermal insulation system. The system consists of inner insulation motor, transmission part, travel limit switch, shading screen, control device and shielded wire, etc.;
( 2) Insulation drive motor in glass greenhouse. The special reduction motor for greenhouse is selected, and the motor is equipped with a travel limit switch, which can realize automatic stop, accurate limit, and stable and reliable operation
(3) Insulation control cabinet in glass greenhouse. The cabinet is equipped with a sunshade screen for unfolding and closing the two sets of contacts. It can be started and stopped manually, and can be electronically controlled by a computer;
(4)Insulation transmission mechanism in glass greenhouse. It can be driven by rack and pinion or chain. The transmission mechanism is composed of a push-pull rod and a transmission shaft, and the circular motion of the transmission shaft is converted into a uniform linear motion through the rack. The driving rod is a special aluminum alloy profile, which is set horizontally, which is convenient for pulling the curtain;
Sprinkler system
A fully automatic rail shifting sprinkler irrigation system in a greenhouse, comprising a fixed frame located on a plurality of planting platforms, the fixed frame is connected to a suspension frame through rollers, the bottom of the suspension frame is movably connected to a lateral support plate, and the edges on both sides of the lateral support plate are A driving wheel is provided, the driving wheel is connected to a driving motor through a connecting shaft, a moving frame is suspended on the connecting shafts of the two driving wheels, a mounting plate is arranged on the moving frame, a plurality of spray heads are arranged on the mounting plate, and a lateral support plate is provided with A plurality of suspension wheels are parallel to the driving wheels, hooks are connected on the suspension wheels, a water inlet pipe is suspended on the hooks, and the water inlet pipe is connected with the sprinkler head. The sprinkler head on the installation board moves toward the length of the planting platform, and the sprinkler head waters the plants on the planting platform, which is convenient to use.
Ventilation system
(1). Discharge the waste heat in the facility to keep the indoor ambient temperature within the range suitable for plant growth.
(2). Discharge residual humidity to keep the relative humidity of indoor environment within the range suitable for plant growth.
(3). Adjust the air composition, remove harmful gases, increase the content of CO2 in the indoor air, and make the crops grow well.
Shading system
(1)The main equipment of the system includes geared motor, transmission shaft, drive shaft, rack and pinion, supporting hanging wheel, driving edge profile, and supporting curtain line.
(2)The geared motor is composed of a motor part and a transmission. The conventional motor power is 0.75kw; the speed is 5.2r/min, and the torque is 600n/m. The stroke of the rack and pinion is generally 3.8 meters, so the single time for opening or closing the sunshade net is about 6 to 8 minutes.
(3)The size of the transmission shaft and the drive shaft is generally Φ32*2.0 hot-dip galvanized pipe.
Hydroponic system
(1)The hydroponic cultivation of vegetables is an existing soilless cultivation technology.
(2)The vegetables are fertilized with a nutrient solution, and the minerals required for the growth of the vegetables are dissolved in the nutrient solution.
(3)Soilless culture requires a planting basin composed of a liquid storage basin and a planting piece. The planting piece is used to accommodate and support the planted vegetables.
(4) The roots of the vegetables are suspended in the planting liquid. Add the nutrients needed for vegetable growth to the liquid.
Heating system
The heating system mainly includes gas, coal-fired, fuel-fired and hot air heaters combined in various ways; aluminum alloy decorative radiators, round-wing fin radiators, and light-pipe radiators are used for heating by hot water boilers. Several methods have their own advantages and disadvantages, and the actual design selection is generally based on several major factors such as the climatic conditions of the project area and the project function.
Lighting system
Plant fill light is a kind of lamp that uses light instead of sunlight to provide the light source needed for plant growth and development according to the natural law of plant growth and the principle that plants use sunlight for photosynthesis. Light is closely related to the growth of crops . Capturing light energy and giving full play to the potential of plant photosynthesis will be directly related to the benefits of agricultural production. In recent years, due to the promotion of market demand, greenhouses are generally used to produce off-season flowers, fruits, vegetables, etc. Due to the short sunshine time in winter and spring, the crops grow slowly and the yield is low, so supplementary light is urgently needed.
High-pressure sodium lamps are often used in the construction of greenhouses, and two types of inductive ballasts and electronic ballasts are used in the working circuit to match the lamps. The inductive ballast has an inductive coil and a silicon steel sheet loop made of non-closed shape, and a small gap is specially reserved to make the magnetic field in a non-saturated state, thereby stabilizing the current. Electronic ballasts have the characteristics of low power consumption, small size, light weight, high power factor, instant start of bulbs, and extended lamp life.
Our service:
*We can supply free sample for you checking quality.
*Any problem about our products will be solved at the most prompt time.
*We always offer relative technical support/consultant and kindly after-sales servie
FAQ:
Q: Are you trading company or manufacturer?
A: We are factory and we also have our trading company.
Q: How long is your delivery time?
A: Generally it is 20-30 days after order.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How to install the greenhouse? Do you provide installation service?
A: We will provide paper or video building manual, or if needed we will send engineer
To do installation guidance...
Glad to provide you service and cooperate.
Our Advantages
Good beautiful appearance;
Good light, admitting quality;
Good display effect, long service life and other advantages.
Glass greenhouse is a better choice in those locations that have low light, geothermal energy and waste heat of power station .
Product Parameters
| Greenhouse Type |
Venlo |
| Cover Material |
Glass |
| Glass Thinckness |
4mm/5+6+5mm/5mm |
| Eaves Height |
3-7m |
| Structure Material |
Hot-dip Galvanized steel pipe |
| Span |
6.4m / 8m/ 9.6m/12m |
| Light Transmisttance Rate |
>96% |
| Glass type |
single layer glass or double layer glass |
| Colmun space |
4m or 8m or customized |
| Specification |
Customization |
| Origin |
China |
| Transport Packing |
Standard packages contaciner |
| Covering material service time |
>30years |
| Galss Color |
Transparency or blue |
Ancillary Equipments
Can add below systems:(Depend on customers' request)
1).Cooling system:
Fast diffusion speed,long lasting efficacy
High water resistant,midew resistance,corrosion resistance,long service life.
System including: fan ,circulation fan ,cooling pad ;
Cooling pad height usually 1.5 m, length can be accroding greenhouse size to costomized .
Fan commonly size : 1380*1380*400mm,voltage 380v or xustomized client voltage ,good reduce temperature effective .
2).Heating system :
easy to tear,flexible space layout,no occuption space of flower production ,heating up fast,uniform heating temperature ,long service life.
3).Irrigation system
It use high-pressure pump for irrigation by spray system,which sprays water onthe crops,is a method of irrigation water for the normal growth.
4).Shading System.
Inside shading system
Outside shading system
5).Coconut planting system
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}