Basic Info.
Product Description
1. Overview:Haoyue Technology's HY-TQDS-01 series ADAS products are vehicle driving safety warning products designed for commercial vehicles, including forward-looking dangerous driving warning systems based on monocular cameras, and anti-fatigue driving warning based on face visual recognition system. The former can warn the driver as early as 2.7s before the collision, effectively preventing and mitigating fatal traffic dangers; the latter can recognize the facial expression characteristics, analyze the fatigue status and distraction status in real time, and warn the driver in time. The technology of the company's products originates from the Subaru Automobile Research Institute of Japan's Fuji Heavy Industries Group. ADAS was equipped with Subaru Legacy in 1999 for mass production, and the world's first AEB system is the only technology in the world that has passed more than 19 years of actual vehicle driving verification.2. Functional parametersI. Front vehicle collision warning (FCW)
Real-time monitoring of the distance of the vehicle in front of the vehicle can warn the driver as early as 2.7 seconds before the collision is expected to prevent rear-end collisions.Working speed | ≥30km/h |
scope of test | 2~110m |
II. Vehicle distance monitoring and early warning (HMW)
Displays the distance of the vehicle in front (in seconds), and warns when approaching the preset dangerous distance.Monitor speed | ≥30km/h |
Distance estimation error | <6% |
III. Urban Front Vehicle Collision Warning (UFCW)
Monitor the distance ahead when driving at low speed, and remind the driver to avoid collision when it is less than the safe distance.Monitor speed | <30km/h |
Alarm distance | 1.8m |
IV. Lane departure warning (LDW)
Monitor the current lane markings and vehicle trajectory, and issue an alarm when you are about to leave the lane unintentionally to remind the driver to keep driving in a safe lane.Monitoring speed | ≥55km/h |
Detection range | 5~55m |
V. Pedestrian collision warning (PCW)-optional
Identify pedestrians ahead and detect distances, issue alarms in dangerous situations to remind drivers to avoid collisions with pedestrians.
VI. Speed limit reminder (SLI)-optional
Identify the speed limit sign and its speed limit value, and issue an alarm when the vehicle exceeds the specified speed limit to remind safe driving.
VII. Stop & go reminder (Stop & go)-optional
Monitor the vehicle in front when parking at close range (such as red lights such as queuing), and remind the driver to start in time when the current car starts from a stationary start to drive in order.
VIII. Rapid acceleration / deceleration reminder (HAW / HDW)-optional
When the vehicle accelerates / brakes urgently, it reminds the driver to control the speed reasonably to avoid the safety risk caused by the emergency speed change.
IX. Sharp turn reminder (HCW)-optional
The vehicle reaches an extreme state when driving in a lane change or a curve, reminding the driver to immediately slow down or reduce the turning direction to avoid accidents.
X. Anti-Fatigue WarningAlarm type | Explanation |
Fatigue driving warning | Identify the continuous state of closed eyes and yawning state (divided into mild and severe) |
Distraction alert | Identify the continuous state of left and right twisting, and the state of head down and head up |
Answer the call alarm | Recognize phone gestures |
Smoking alarm | Recognize smoking gestures |
Obscuration or departure warning | Recognize that the camera is blocked or the driver leaves the seat |
Identification | Identify the current driver's identity information |
Infrared blocking surname sunglasses alarm | The driver wears infrared blocking sunglasses, the device can recognize the alarm |
XI. Other extended functions:
1) Strong robustness, the driver can recognize normally when wearing myopia glasses and sunglasses;
2) The enabling speed is 50km / h, which can be configured according to actual usage;
3) Strong resistance to external light sources, it can work normally in different lighting and climate scenarios such as day, cloudy or night, rainy, snowy, etc .;
4) ADAS supports both sound and light alarms (sound and display display), DMS supports voice prompt alarms;
5) Support real-time video live broadcast of ADAS or DMS, and support ADAS and DMS video capture;
6) Support local storage of real-time video and alarm video of ADAS and DMS, up to 256G memory card;
7) Support to have body data collection interface, at least 2 CAN interfaces;
8) Support the ADAS camera to identify and distinguish between the vehicle in the same lane and the vehicle in the opposite lane;
9) Support to set and adjust dynamic parameters remotely and at any time through the platform, such as alarm threshold, video resolution, alarm duration, alarm type, etc., can remotely control and open and close various functions;
10) The DMS camera can be fixed on the A-pillar or instrument panel, using 940nm infrared light, basically no exposure, and minimal interference to the driver;
11) Support mobile phone installation and automatic calibration;
12) Support equipment self-inspection and prompt maintenance fault code information;
XII. Job description
1) This product is based on independent research and development of international standard Subaru visual recognition technology;
2) Can be used in most scenes such as day, night, tunnel, rainy days (except extreme weather);
3) Support snapshot pictures or short videos in alarm events;
4) Support function selection, please confirm with official technical support;
5) Support direct network transmission of alarm data, please contact official technical support for protocol docking;
6) Support network remote upgrade program.3. Hardware SpecificationsI. Hardware system parametersProcessor | Cortex-A53 8-Core, up to 2.0GHz |
Flash | 16G Byte eMMC |
Network | 2G Byte LPDDR3 |
Network | 4G-LTE |
WiFi | support |
Bluetooth | support |
GPS / Beidou | supports dual mode |
Speaker | support |
TF card | supports more than 256G |
II. How to get driving dataCAN input | support |
Analog signal input | Simulated vehicle speed line, left and right lights control signal line |
III. Data output interfaceCAN (standard) | Support 5 way CAN bidirectional communication |
Ethernet (optional) | Support 1 way network port |
Serial port (optional) | Support 1 RS232, 1 RS485 |
IV. ADAS camera moduleVision sensor | AR0132 RGB |
Dynamic Range | >115dB |
Effective Pixels | 1280x960,support1080P |
Shutter type | Rolling shutter |
Field angle | 52° |
V. Anti-fatigue camera module (optional)Vision sensor | AR0144 |
Effective Pixels | 1280x800,support 1080P |
Shutter type | Global shutter |
Field angle | 90° |
Infrared wavelength | 940nm |
VI. Electrical parametersRated voltage | 9~36V DC |
Rated power | 10W |
VII. Structural parametersHost size | 116 × 81 × 43.4mm (without 3M glue) |
Camera adjustable angle | 21°~90° |
Material | PC plastic, aluminum alloy |
Anti-fatigue module size | 68 × 65.6 × 68mm (with bracket, without 3M glue) |
Camera adjustable angle | -20 ° ~ + 40 ° ("-" is looking down, "+" is looking up) |
Material | PC plastic, aluminum alloy |
LED module size | 51.5 × 52 × 25.8mm (folded state, without 3M glue); 51.5 × 52 × 58.8mm (upright, without 3M glue) |
Material | PC plastic, aluminum alloy |
VIII. Working environment parametersWorking temperature | -20~70ºC |
Working humidity | 10~90%RH |
4. DimensionsI. Appearance of the main unit (unit: mm)II. Appearance of fatigue driving host (unit: mm)III. Appearance size of display screen (mm)IV. packing list Rial number | The name | Specification | Quantity | Remarks |
1 | ADAS host | 116*76mm | 1 | lane camera |
2 | Tired driving camera | 68*37*68mm | 1 | |
3 | Display panel | 51.5*52.5mm | 1 | Matching |
4 | SMI card | | 1 | Matching |
5 | SD memory card | | 1 | Matching |
6 | Matching harness | 4000mm | 1 | |
Address:
Building 2, Hengxin Science and Technology Industrial Park, No. 8158 Tingwei Highway, Jinshan District, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Lights & Lighting, Service
Company Introduction:
Shanghai Bopay Electronic Commerce Co., Ltd. Was established in August 2018 as China′s economic center. It is an Internet E-Commerce Co., Ltd. With the mission of integrating commercial vehicle parts and components channels. It is also an E-Commerce Co., Ltd. With the combination of Internet thinking and information flow push technology.
Bopay′s vision is to integrate many Internet and commercial enterprises in the commercial vehicle parts market to help the cooperative business group build an electronic business Sales Service Co, which is compatible with the characteristics of commercial vehicle parts and components, such as B2B2C and 020.
At the same time, Shanghai Bopay Electronic Commerce Co., Ltd. is also determined to support the vast number of business partners who have demands for the construction of Internet websites, to provide website production, micro-mall, small procedures and other station-building services and agent operation services for the vast number of partners seeking cooperation, to enhance the brand image of enterprises, brand communication to provide overall outsourcing services, to open up the road of e-commerce for the vast number of partners, to expand. Show business channels, win-win cooperation!