Suppliers with verified business licenses
A Light Guide Plate is an acrylic panel typically made from pure PMMA resin. PMMA is extremely transparent, highly weather resistant, and lasts longer than 30 years on average. On the bottom of the panel a matrix of lines can be etched, called V-Cutting, dots can be printed, a combination of both, or particulates are added into the panel itself. The purpose of all methods is to direct light out the front.
Specifications:
Acrylic Light Guide Panel | ||||||
Our specification is as below | ||||||
Standard Size | 1180*1180mm,1220*2440mm,any cuttting size is available | |||||
Thickness(mm) | 3mm, 4mm, 6mm | |||||
Color | clear transparent | |||||
Package: | covered with PE film , and using wooden pallet for delivery | |||||
Usage | led panel light, slim light box, interior light, in-floor lighting |
Product Show:
Our Company&Workshop:
1. Great care should be taken when handling infrared optics. Please note the following precautions :
1) Always wear powder-free finger cots or rubber/latex gloves when handling optics. Dirt and oil from the skin can severely contaminate optics, causing a major degradation in performance.
2) Do not use any tools to manipulate optics -- this includes tweezers or picks.
3) Always place optics on supplied lens tissue for protection.
4) Never place optics on a hard or rough surface. Infrared optics can be easily scratched.
5) Bare gold or bare copper should never be cleaned or touched.
6) All materials used for infrared optics are fragile, whether single crystal or polycrystalline, large or fine grained. They are not as strong as glass and will not withstand procedures normally used on glass optics.
Suppliers with verified business licenses