| Type: | Low Intensity Aviation Obstruction Light |
|---|---|
| Emitting Color: | Red |
| IP Rating: | IP66 |
| Certification: | CCC, CE, RoHS, SAA, ISO, CB/TUV/Caac |
| Intensity(CD): | ≥32.5CD(Type B) |
| Intensity(CD)Other: | Others Optional(10CD, 100CD,etc) |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Electrical
1.CR-EE LED, make sure LED keep bright while use for long time| Light Source | LED |
| Available Colors | Red(Other color is optional) |
| Intensity(cd) | ≥32.5cd(type B),others optional(10cd, 100cd,etc) |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | ≥10 |
| Flash Characteristics | Steady-burning/20/30/60 adjustable |
| Working mode | Main & stand by(other modes are optional) |
| Operation Mode | Dusk-to-dawn Automatically as standard. 24hours operation as option. |
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
| Lightning surge | IEC61000-4-5 L- N ±3kV |
| IEC61000-4-5 L- PE ±6kV | |
| IEC61000-4-5 N- PE ±6kV | |
| Electrostatic | IEC61000-4-2 Contact discharge 8kV |
| Environmental Factors | |
| Ambient Temperature(ºC) | -40ºC~65ºC |
| Storage temperature(ºC) | -55ºC~70ºC |
| Humidity | 10%-95%RH(No condensation) |
| Compliance | |
| ICAO | Annex 14 Volume 1,' Aerodrome Design and Operations' Seventh edition July 2016, t able 6.3 Low-intensity Type A/B/E Obstacle Light |
| FAA | L-810 |
| Options Available | NVG(Night Vision Goggles) compatible LED |
| Working mode | |
| GPS sync flashing | |
| Dry contac output | |
| Solar Power system | |
| Model | Power input | Light source |
Flash rate |
Lens color |
Photocell | Dry contact Alarm |
GPSsync flashing |
Control |
| MF-Ll-B2 | 110-240Vac&48Vdc 12VDC 36VDC |
IR | Steady 20FPM 30FPM 6OFPM 40FPM |
Red Clear |
Built-in No |
No Alarm Alarm |
No SYNC GPS SNYC |
Used alone Used with controller |
Standard Type:
(Mounting bracket is charged separately, and size is customized)
MF-LI-B2 low-intensity light could be used alone on the top of the
High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the height is lower than 45m.
1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst
FAQ:
Are you a manufacturer?
Absolutely, we are a professional manufacturer with 16 years of experience.
Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.
What is your main product?
Our main products are as follows:
LED Triproof lights/ LED Vapor Tight Lights
LED High Bay Lights
LED Flood lgihts
LED Explosion Proof Lights
LED Down Lights
LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
LED garden spot/spike lights
LED inground lights
What is the minimum order quantity (MOQ)?
For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.
What are the payment options?
We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP
What is the delivery time?
The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.
How are the products packaged?
Each piece is packed in an individual color box and then placed in a strong master carton.
Why should you choose us?
1). We offer OEM/ODM services.
2). We have our own design team.
3). We offer high-quality products at reasonable prices.
4). We have no MOQ request.
5). Our sales team has 12 years of experience in underwater lighting.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}