| name |
4'x8' PP Plastic Coated Plywood Sheet |
| Specifications |
Size |
1220x2440mm, etc. |
| Thickness |
Above 9mm |
| Thickness Tolerance |
Depends on clients' requirement (The bigger thickness tolerance is, the cheaper price will be.) |
| Hot Press |
One Time Hot Press |
Low cost and cheap price |
| Two Times Hot Press |
With sanding, smooth and flat face |
| Face/Back |
Plastic coated (Green, blue, etc.) |
| Core |
Full poplar core, hardwood, or combi core |
| Glue |
WBP - Phenolic & Melamine |
Amount of the glue, to take 1.7mm thickness veneer for example, the amount of glue used in other factories is 0.25kg/m2, but ours is 0.33kg/m2. It will effectively avoid open joint(core gap) and delamination and ensure the high strenght of plywood in application. |
| Moisture Content |
Less than 12% |
| Density |
580KGS/CBM or so |
| Recycle Times |
30 times or so |
| Tolerance on Mean Density within a Panel |
-3.1%, +1.6% |
| Bending Strength (MOR) |
Along the grain |
60 MPa |
| Across the grain |
40 MPa |
| Modulus of Elasticity in Bending (MOE) |
Along the grain |
6800 MPa |
| Across the grain |
5200 MPa |
| Internal Bond (IB) |
Avg. 0.50 MPa |
Min. 0.3 MPa |
| Surface Tensile Strength (SS) |
Avg. 1.20 MPa |
Min. 0.90 MPa |
| Swelling in Thickness 2h (TS) |
Avg. 1.2% |
Max. 3.3% |
| Formaldehyde Potential (FY) |
5.2mg/100g |
| Usages |
Concrete construction, floor, wall panel, formwork, etc. |
| Package |
Pallet with thin plywood or carton, and bind with steel tape. |
| Loading Quantity |
Loading by container ship |
1x20GP |
8 CRATES = 22 CBM |
| 1x40HQ |
18 CRATES = 52 CBM |
| Loading by bulk ship |
1.8 CBM/CRATE (Height 0.6 M) |
| Delivery Time |
If ready stock, 1 days |
| If to be newly produced, usually 7 - 10 days |
| Minumum Order |
1x20GP FCL |
| Price Term |
FOB, CFR, CIF, etc. |
| Payment Term |
T/T, L/C, etc. |
| Certificate |
SGS, FSC, CARB, BV, SONCAP, COC, etc. |
| Supply Ability |
8x40HQ/Day |
Audited Supplier 
){kind=link}
){kind=link}