| Task: | Digita Output |
|---|---|
| Structure: | Closed-Loop |
| Mathematical Model: | Linear |
| Signal: | Continuous |
| Function: | Automatic Control, Digita Output |
| Certification: | CE |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) | |||
| General information | |||
| Product type designation | F-DQ 4x24 V DC/2A HF | ||
| usable BaseUnits | BU type A0 | ||
| Product function | |||
|
Yes; I&M0 to I&M3 | ||
| Engineering with | |||
|
V12 | ||
|
V5.5 SP3 / - | ||
|
V2.31 | ||
| Supply voltage | |||
| Rated value (DC) | 24 V | ||
| permissible range, lower limit (DC) | 20.4 V | ||
| permissible range, upper limit (DC) | 28.8 V | ||
| Reverse polarity protection | Yes | ||
| power supply according to NEC Class 2 required | No | ||
| Input current | |||
| Current consumption (rated value) | 75 mA; without load | ||
| Current consumption, max. | 21 mA; From the backplane bus | ||
| output voltage / header | |||
| Rated value (DC) | 24 V | ||
| Power | |||
| Power available from the backplane bus | 70 mW | ||
| Power loss | |||
| Power loss, typ. | 4 W | ||
| Address area | |||
| Address space per module | |||
|
5 byte | ||
|
5 byte | ||
| Hardware configuration | |||
Automatic encoding
|
Yes | ||
| Yes | |||
| Digital outputs | |||
| Type of digital output | Transistor | ||
| Number of digital outputs | 4 | ||
| Digital outputs, parameterizable | Yes | ||
Short-circuit protection
|
Yes | ||
| > 3.3 A | |||
| Open-circuit detection | Yes | ||
|
8 mA | ||
Overload protection
|
Yes | ||
| 2.9 A | |||
| Limitation of inductive shutdown voltage to | Typ. -2x 47 V | ||
| Switching capacity of the outputs | |||
|
2 A | ||
|
10 W | ||
| Load resistance range | |||
|
12 ohm | ||
|
2 000 ohm | ||
| Output voltage | |||
|
24 V; L+ (-0.5 V) | ||
| Output current | |||
|
2 A | ||
|
0.5 mA | ||
| Switching frequency | |||
|
30 Hz; Symmetrical | ||
|
0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical | ||
|
10 Hz; Symmetrical | ||
| Total current of the outputs | |||
|
2 A; note derating data in the manual | ||
|
6 A; note derating data in the manual | ||
| Cable length | |||
|
1 000 m | ||
|
500 m | ||
| Interrupts/diagnostics/status information | |||
| Diagnostics function | Yes | ||
| Substitute values connectable | No | ||
| Alarms | |||
|
Yes | ||
| Diagnostics indication LED | |||
|
Yes; green LED | ||
|
Yes; red LED | ||
|
Yes; green PWR LED | ||
|
Yes; green LED | ||
|
Yes; red LED | ||
|
Yes; green/red DIAG LED | ||
| Potential separation | |||
| Potential separation channels | |||
|
No | ||
|
Yes | ||
|
No | ||
| Isolation | |||
| Isolation tested with | 707 V DC (type test) | ||
| Standards, approvals, certificates | |||
| Suitable for safety functions | Yes | ||
| Highest safety class achievable in safety mode | |||
|
PLe | ||
|
SIL 3 | ||
| Probability of failure (for service life of 20 years and repair time of 100 hours) | |||
| - Low demand mode: PFDavg in accordance with SIL2 | < 2.00E-04 | ||
| - Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 | ||
| - High demand/continuous mode: PFH in accordance with SIL2 | < 1.00E-08 1/h | ||
| - High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 1/h | ||
| Ambient conditions | |||
| Ambient temperature during operation | |||
|
0 °C 60 °C 0 °C 50 °C |
| Altitude during operation relating to sea level | |
|
4 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm 73 mm 58 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 57 g |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}