• 6 Inch 8 Inch Diesel Engine Vacuum Priming Assisted Automatic Auto-Prime Solid Handling Well Point Dewatering Pump

6 Inch 8 Inch Diesel Engine Vacuum Priming Assisted Automatic Auto-Prime Solid Handling Well Point Dewatering Pump

Max.Head: 30-50m
Max.Capacity: 100m3/Hr
Driving Type: Desel Eg
Material: Cast Iron
Structure: Single-stage Pump
Assembly: Liquid Pumps
Customization:
Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Power
Desel Eg
Start Up
Start Pump
Type
Blade Pump
Application
Clarified Water Pump, Sewage Pump, Chemical Pump
Industry
Construction, Engineering
Media
Groundwater
Performance
Well Point Dewatering Pump
Theory
Water Ring Vacuum Pump Auxiliary, Gas-Liquid Sepa
Transport Package
Box
Specification
2*2*1.5m
Trademark
TAIJI
Origin
Qingdao

Product Description

Well Points: The Versatile Solution
Ideal for shallow aquifers where the water level needs to be lowered no more than 15 or 20 feet, Griffin well point systems allow you to pump anything from a few gallons per minute in fine sandy silts to thousands of gallons per minute in coarse sands and gravels. Our most versatile pre-drainage solution.

This system features well points spaced around an excavation and connected to a common header, which is in turn attached to one or more pumps. Deeper excavations will require multiple stages of well point systems due to the vacuum limitation of the pump.


 
Pump Model YP100 YP125 YP150 YP200 YP250 YP300
Standard Pump Body Material Cast Iron
Standard Pump Impeller Material Stainless Steel
Standard Pump Shaft Material 2Cr13
Bearing Type Ball
Maximum Lift in theory (m) 9.5
Nominal Speed (rpm) 1800
Inlet & Outlet Size (mm) 100 125 150 200 250 300
Max. Dia Solids Handling Capability (mm) 20 26 76 76 20 65
Max. Discharge Head (m) 32 34 42 53 30 55
Max. Flow Rate (m3/h) 150 200 360 540 1000 1800


When designing a well point system, Griffin will take into consideration a variety of factors, including:
• Physical layout
• Adjacent areas
• Soil conditions
• Permeability
• Amount of water to be pumped
• Depth to imperviousness
• Stratification
• Friction losses developed in the suction side system











The wellpoint dewatering system in comparison with other dewatering systems is:
Applicable in most type of soils
A flexible system
Effective and efficient
Easily to adapt depending on dewatering results achieved



More particularly in wellpoint drainage and dewatering, these pumps have come into widespread use because they perform their duty reliably under all conditions, with a minimum of attention and maintenance. Further, they are the most economical pumps for wellpoint drainage operations as they have an extremely high efficiency of about 92% resulting in a very low horse power motor requirement of only 7,5 kW. This means when operating with diesel engines you can comfortable use a one cylinder engine compared to a 3-cylinder of 22 Kw before.

Fuel saving per pump can go up to 27,500 liters per year per pump!!

Another main advantage in pumping water from dewatering wells is that they develop a pulsating vacuum, causing the water and/or air to be snatched out of the ground, as it were. Since this effect is beneficial to the stability of the bottom and slopes of the excavation, the reciprocating pump can indeed claim to be a universal pump suitable for horizontal drainage, for drainage from wells with free gravity inflow, or functioning on the vacuum principle. Thanks to their dual (duplex) form of construction, these pumps are characterized by very steady operation. A major advantage is that the capacity remains constant despite any increase in suction and/or delivery head. This is in marked contrast with centrifugal pumps, whose capacity shows a marked decrease if the suction head or delivery head is increased while the relatively high installed power remains viable. The piston pump is selfpriming and can handle therefor water and air without the need of an addional vacuum pump.Because of their smooth operation andslow running at a low rate of about 65 - 70 strokes per minute the pumps have by far the longest life-time for these wellpoint drainage applications.

Wellpoints are jetted into the soil and each wellpoint is connected to a 4 inch header HDPE pipe to collect the water and pumped by pistonpumps creating a vacuum. The water is pumped away which creates lowering of the groundwater table.




With profound understanding of the importance of customer requirement and 15 years experience,we offer highly cost-effective products,enjoying a good reputation. And we have various kinds of certificates, such as ISO9001, API, ABS,PED, UL,FM, WRAS, DVGW, DNV, LR, BV etc, selling to more than 30 countries. Being a reliable partner, we are looking forward to cooperating with you.
FAQ
Q1. How to place the order?
A1: You can send us email or inquiry at alibaba directly.

Q2: Can you provide the free samples?
A2:Yes, the free samples is available. You just need to pay the freight cost.

Q3: Can I have my own customized product?
A3: Yes, your customized requirements for color, size, package, mark, etc.

Q4. Do you test all your goods before delivery?
A4: Yes, we have 100% test before delivery.

Q5: How long is your delivery time?
A5: Generally it is 10-20 days if the goods are in stock. Customized goods need to negotiate delivery.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category

Supplier Homepage Products Others 6 Inch 8 Inch Diesel Engine Vacuum Priming Assisted Automatic Auto-Prime Solid Handling Well Point Dewatering Pump

You Might Also Like

Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
2000000 RMB