Basic Info.
Transport Package
Carton.
Specification
19*14.5*4.5
Product Description
Content . Attention .................................2 . Terminal Outlook ...........................…2 . Main Function ..............................3 . Specification.................................4 . Operation .................................5 . Installation ..............................13 . Application ..............................…14 . Important Safety Precautions .....................14 . VMT Serials ..............................…16 .Guarantee.................................…17 . Attention- Make sure to read this manual carefully before using this product.
- Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the tracker will not work normally.
- Please make sure that all the cables of the tracker has been connected rightly, and then connect the terminal to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
- The terminal works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.
- The terminal work voltage is 9V-40V. Please use in the scope of work voltage.
- The host of Compass/GPS terminal is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.
- To avoid electromagnetic interference or incompatible configuration, please stop using your terminal in the noticed place.
.Terminal Outlook . Main Function - Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
- Triggering Emergency Alarm: When there is an emergency happened on the vehicle, you can put on the button and the installed unit to send out alarm to the authorized numbers.
- Remote controlling fuel and circuit: You can control the fuel and circuit via the unit by SMS in anywhere and anytime.
- Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter from the vehicle.
- Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
- Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
- Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it beyond the district.
- Get the geography information: read the terminal's location information via SMS.
- Read terminal address: read the terminal's address information via SMS, this function need to be supported by platform.
- Auto Tracker Function: set up auto tracking function by SMS or online tracking platform.
- Mileage statistics, Ignition detecting, cutting off power and alarm.
- Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
- The IP setting can be modified, support IP and web server domain.
- Support LED advertisement screen. Platform center can send advertisement message to car with this tracker and LED advertisement screen.(OEM)
- Fuel monitoring function, support voltage type sensor or RS232 type sensor or Ultrasonic fuel sensor. (OEM)
- Temperature detecting function, support 2 channels NTC temperature sensor.
- ID card input function, support RS232 type RFID card reader.
- Overspeed alarm by buzzer output.(OEM)
- Build-in 3 axis g-sensor, auto saving power consumption.
- Support OTA function.
- RS232 support.
- Hardware watchdog, guarantee 24 hours of trouble free operation.
- All of terminals has over-voltage and over-current protection function, and opposite connection protection.
- Each terminal has a compensation function for Blind Area, up 1K~131K pcs.
.Specification
| Item | VMT-T2 |
| GSM | 850MHz,900MHz,1800MHz,1900MHz |
| WCDMA | 2100/1900/900/850MHz |
| 4G-LTE | 800/850/900/1800/2100/2600MHz/etc |
| GPS Chip | Ublox7/Compass |
| GPS Sensitivity | -160dBm |
| GPS Accuracy | 3 - 30m |
| Network | SMS,GPRS,CDMA 1x,3G,4G |
| Way of Tracking | Cell Phone or Platform |
| Dim. | 86*56*25mm |
| Weight | 0.146Kg |
| Operation Temp. | -20°Cto+70°C |
| Storage Temp. | -40°Cto+85°C |
| Work Humidity | 5-95%RH |
| Work Voltage | DC 9V-40V |
| Battery | 3.7V / 300mAh |
| Standby Work Current | < 40mA |
| Temperature Range | -20~90ºC |
| Fuel signal out voltage | 0~6V |
| RS232 | 2 Channels RS232(HDSC Version) |
- Setup terminal's IP and ID
The IP address and port of the terminal can be modified via SMS.After setted,termianl will upload data to traget platform. SMS format as follow: *setip, IP ADDRESS,IP Port,ID# - Setup terminal's Web server name,port and ID
The server web name and port of the terminal can be setted by SMS. Terminal support the server web name, after setted termainl will upload data by server's web name.SMS format as follow:
*setweb,WEB NAME,IP Port,ID#
- Set APN
In order to upload monitor data to the server, you still must set mobile network Access Point Name (APN) first. If you don't know the APN, you can consult local network service supplier. The format of set APN as follow
*setapn,APN,USER,PWD#
For example,the SIM card from ChinaMobile,you send SMS "*setapn,CMNET,,#" to the device.
- Setup Auto-tracking function
Real time uploading data to server by SMS command.Once setted the time, terminal will upload data by time interval.Time interval unite is second,format as follow:
*track,On INTERVALS,OFF INTERVALS#
On INTERVALS is uploading when ignition is on, OFF INTERVALS is uploading when ignition is off.
- Setup Terminal's sleeping function
Terminal can setted to support maximum saving power mode.All is easy to set by SMS command,format as follow:
*sleep,ONTime,Time1,Time2#
ONTime means the module on time,unite is minute,set to zero to cancel this function.Time1 is the interval time when main-power-in, Time2 is the interval time when using baterry power.
- Add administrator or authorized telephone number
The terminal supports administrator mode or no-administrator mode.If terminal has been setted to administrator mode, only the administrator or authorized telephone number can operate the terminal.First addded number will be as administrator, other will authorized number.SMS as follow:
*admin,TELEPHONE NUMER#
TELEPHONE NUMER is a telephone format string. Maximum char can be supprted 16 digitals.Adminstrator can operate any SMS command.
- Delete administrator or authorized telephone number
This command is to delete the exist telephone number in terminal phone list.SMS format as follow:
*del,TELEPHONE NUMER#
Once deleted the administrator phone number,terminal will clear all telephone number and change to no-administrator mode.
- Control fuel
This command is to on or off car's fuel supply system. Format as follow:
*fuel,ON/OFF#
ON/OFF is to set fuel on or off.
- Control Circuit
This command is to on or off car's electricity supply system. Format as follow:
*ele,ON/OFF#
ON/OFF is to set electricity on or off.
- Set Time zone
This command is to set trminal's GMT zone. Format as follow:
*gmt,X#
X is to a number, can be -2 or 2,about the range please the GMT setting.
- Set Terminal Overspeed Alarm Function
This command is to on or off car's electricity supply system. Format as follow:
*speed,X#
X is to set the car speed of KM/H, set to ZERO is to cancel this function.
- Set ignition on/off status by input voltage
This command is to set ignition on/off status by input voltage. Format as follow:
*ignvol,X#
X is the setting voltage of input power. After setted , when car's input power over the setted value, terminal will check as ignition on. Set to ZERO is to cancel this function.
- Set GPS turing function
This command is to on or set car's changing of moving direction. Format as follow:
*turn,X#
X is to set the direction, range 15 to 120, set to ZERO to cancel this function.
- Set the sensitivity of G-sensor
This command is to set the sensitivity of terminal inter G-sonsor . Format as follow:
*gsen,sen,X#
X is sensitivity level of setting,range 1~99.
- Set ignition on/off stastus by G-sensor
This command is to check continue shaking or freezing to be a igintion on/off status. Format as follow:
*gsen,ign,X,Y#
X is to set continue shaking as ignition on, Y is to set continue freezing as ignition off,all the unite is second,set to ZERO to cancel this function.
- Set GPS power-saving by G-sensor
This command is set the GPS module power-saving and anti-shulte function. Format as follow:
*gsen,gps,X,Y#X is to set anti-shulte function, Y is to set GPS power-saving time,the unite is minute, set to ZERO to cancle this function. - Set termial incaming-call mode
This command is to on or off car's electricity supply system. Format as follow:
*call,Xstring#
Xstring can be any/check/close,any stands for when call in ,terminal will pickup all call,check means only administrator or authorized telephone call-in can be answered,close means any call-in will be huanged.
- Check Terminal's running information
This command is to check terminal's setting and running information. Format as follow:
infoExample:
- Reboot terminal by SMS
This command is to reboot the ternimal. Format as follow:
reboot
- Read terminal's google map
This command is to read out google link when GPS fixed.Format as follow:
map
.Installation | Interface Outlook |
| |
| Type | |
| Model | Molex SAW 3.0-10 2x5 |
| Description | Pin | Color | Function |
| 1 | Red | 9~60V Power in |
| 2 | Black | Grand |
| 3 | Pink | Original Car Alarm(Positive Trig In) |
| 4 | Black | SOS User Alarm Negative(GND) |
| 5 | Green | Ignition Detection |
| 6 | Blue | SOS User Alarm Positive |
| 7 | Purple | 0~6V fuel signal detecting
Temperature Sensor in(OEM) |
| 8 | White | Electricity Control(or buzzer output) |
| 9 | Grey | 0~15V analog signal in
Temperature Sensor in(OEM) |
| 10 | Yellow | Fuel Control |
| Type |
For Port I & II
|
- Power supply line: The red wire connects 12V"+",Black wire connects to 12V"-"
- Wire for cutting off fuel of the tracker,Yellow wire connects the relay pin 86,85 pin connect to 12 V DC , 87 pin and 30 pin in series power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
- Wire for cutting off circuit of the tracker,White wire connects relay pin 86,85 pin to 12 V DC, 87 pin and 30 pin are in series power supply circuits. Caution: Wrong connection of yellow wire will damage the tracker.
- Emergency triggering alarm,The blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
.Application- Global positioning, Vehicle locating
- Real-time monitoring, Timing tracking
- Cutting off power and circuit by remote control
- Vehicle rental / Fleet management etc.
- All IOT Issuse.
. Important Safety Precautions- Because of the tracking function, user must use this product in legitimate scope. If used in illegal application (such as: intentionally used to violate another's privacy, etc.) and results in the damage of another's rights and interests, user must take responsible for himself.
- Before using this product, ensure the correct operation of this product, be sure to read the notes and instructions in this manual, avoid improper operation causing accidents and injuries.
- The product obtains the corresponding location information through the satellite positioning (GPS), satellite-based positioning will be affected by the weather and environmental factors, in some circumstances there will have smaller error in location information is normal.
- The product uses mobile communication system to send location information, before using, please confirm to the local mobile telecom you SIM card has open data service.
- Please handle with care of the product, avoid mechanical vibration of shaking.
- Please use dry cloth to clean this product shell, cannot use chemical, cleaning agents, or strong detergents to clean this product.
- Do not use any paint daub this product. This will clog sundries in the moving parts, thus affecting the normal operation of this product.
- Do not demolish antenna yourself, and also cannot use other antennas of other objects to replace, this may seriously affect the quality of communication, and may even change the antenna radiation harmful to your health.
- When using this product user should put the product on proper place avoid a strong impact, vibration or throw the product, resulting in damage occurred in various parts.
- The product and the accessories (including batteries and chargers, etc.), do not have waterproof feature, please used with caution.
- Please use the accessories designated by manufacturer (including batteries and charger), the use of any other accessories will make warranty service invalid. Due to the use of non-original accessories and caused damage, the product manufacturer will not take any warranty responsibility.
- Do not allow metal objects (such as the key in your pocket) near the battery, avoid generate short-circuit of battery contact.
- Do not bend or force open the battery, or put the battery in water or fire.
- Battery power using up or discharged batteries, please dispose of used battery according to your local environmental laws and guidelines.
- Do not stamp any of the fire source (such as: the candles have been lit) on the product.
- Do not place this product humid, high temperature, or too much dust, so as to avid failure.
- Do not place this product in the microwave or other high-voltage devices, in order to avoid damage of the accessories.
- This product is a high-frequency equipment, cannot be used in non-volatile liquid environment, in order to avoid and explosion or injury.
- Do not unauthorized dismantling of all parts of the product or to ensure the normal use of this product.
. VMT Serials VMT Serials| TYPE | G1 | C1 | C3 | C5 | T2 | T4 | T6 | T8 | L1 |
| CPU | OPEN | M3 | M3 | M3 | M3 | M3 | M3 | M4+M3 | M3 |
| Flash | 32M | 8K
32M | 8K
32M | 8K
32M | 8K
32M | 8K
32M | 64K
32M
128M | 64K
32M
128M | 8K
32M |
| Antenna | ALL-In | ALL-In | ALL-In | ALL-In | Extenal | Extenal | Extenal | Extenal | ALL-In |
| Woring Voltage | DC 9~100 | DC 9~100 | DC 9~100 | DC 9~100 | DC 9~60 | DC 9~60 | DC 9~60 | DC 9~60 | |
| Network | GSM
LTE | GSM
WCDMA
4G LTE
NB2
CATM1
WIFI* | GSM
WCDMA
4G LTE
NB2
CATM1
WIFI*
BLE* | WCDMA
4G LTE
WIFI*
BLE* | GSM
WCDMA
4G LTE
WIFI*
BLE* | GSM
WCDMA
4G LTE
WIFI*
BLE* | GSM
WCDMA
4G LTE
WIFI*
BLE* | WCDMA
4G LTE
WIFI
BLE* | GSM
WCDMA
4G LTE
NB2
CATM1
WIFI
BLE* |
| GPS | GPS/BD | GPS/BD | GPS/BD | GPS/BD | GPS/BD | GPS/BD | GPS/BD | GPS/BD | GPS/BD |
| Interface | Ignition
Fuel Contro | Ignition
Fuel Control
RS232
or
RS485 | Ignition
Fuel Control
RS232
ADC in
SOS
OUT
RS485
CAN
| Ignition
Fuel/ELE Control
SOS
ADC in
RS232
RS485
CAN
2 x SIM | Ignition
Fuel/ELE Control
SOS
ADC in
RS232 | Ignition
Fuel/ELE Control
SOS
ADC in
RS232 x2
IN x 5*
OUT x 4*
CAN x 1*
RS485 x1*
2 x SIM | Ignition
Fuel/ELE Control
SOS
ADC in
RS232 x5
IN x 7
OUT x 3
CAN x 1
TF IN*
USB*
2 x SIM | Ignition
Fuel/ELE Control
SOS
ADC in
RS232 x5
IN x 7
OUT x 3
CAN x 3
TF IN
RS485 x2
USB OTG
2 x SIM | |
| Power | | < 30mA | < 30mA | < 30mA | < 30mA | < 30mA | < 30mA | < 30mA | < 20uA |
| User name | | |
| Address | |
| Telephone | | Zip | |
| Purchasing address | |
| Retail price | | Purchasing No. | |
| Commodity name and specification | | Model No. | |
| Signature of Dealer | | User Signature | |
- Three months upon date of purchase, if there is function problem, we should offer the same item subject to goods and packing maintain perfect.
- One year upon date of purchase, we will guarantee to keep the goods in repair.(not including fittings)
- Guarantee service is subject to normally using.
- All of damage by man-made (tear open the housing, tear off the sticker, unmorally using), or losing this card, we will not guarantee.
Address:
8/F, Building F, Digital Silicon Valley, No. 89, Xinhengping Road, Henggang Street, Longgang District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Instruments & Meters, Security & Protection, Tools & Hardware, Transportation
Company Introduction:
Established in 2011, Shenzhen Liyuan Communications Technology Co., Ltd. is a smart vehicle networking system solution provider with R&D, production, sales, service and integration. It has focused on the smart vehicle networking field for 10 years. It adheres to technology-based, continuous innovation, open cooperation and customizes smart information terminals in the industry:
Development and production of software/hardware based on 2G/3G/4G/CDMA/WCDMA/NB-IOT/eMTC/satellite communication/LORA/Beidou/GPS location service, new energy vehicle TBOX, 4G smart entertainment vehicle terminal, OBD/CANBUS terminal, shared vehicle terminal, etc. Provides competitive terminal and application platform solutions for enterprise customers. The company has more than 100 employees, nearly 10 of whom have undergraduate or higher research and development teams, and have obtained more than 10 patents and computer software copyrights.
){kind=link}