After-sales Service: | 1 Year |
---|---|
Warranty: | 1 Year |
Control Mode: | Point to Point Control |
Drive Mode: | Electric |
Application: | Loading |
Condition: | New |
Samples: |
---|
Suppliers with verified business licenses
FLY BOAT-- LOAD TRANSFER AGV AMR
Fly boat AMR AGV Technical Parameters | |||
Dimension | Dimension | 800*590(mm) | |
Net weight | 70kg | ||
Max loading weight | 200kg | ||
Total power | 100w | ||
Appearance material | Fireproof cold rolled sheet | ||
Sensor | LiDAR*1 | Detection range: 230º | |
Detection distance: 0.05~25m | |||
Sampling frequency: 4500Hz | |||
Scan speed: 10Hz | |||
Depth camera*2 | Position: front (default), top (optional) | ||
FOV:H 58.4° V 45.5° | |||
Output: RGB+D | |||
Detection distance: 0.4~2m | |||
Ultrasonic (optional) | Position: Back | ||
Detection range: 15º | |||
Detection distance: 0.1~0.5m | |||
Screen | 7-inch LCD screen, resolution 1024*600, with multi-touch function | ||
IMU | 6DOF; rate dynamic range: ±2000dps; accuracy: 0.01 degrees | ||
Environment | Operating environment | Indoor, clean environment, no corrosive gases | |
Operating temperature | minus 0ºC~55ºC; anti-UV; anti-corrosion | ||
Storage temperature | Minus 10ºC~65ºC | ||
Charging temperature | 5~40ºC(indoor) | ||
Sports performance | Travel speed | 0.3-1m/s adjustable | |
Narrow passage | 90cm | ||
Climbing angle | 10º | ||
Overpass width | ≤5cm | ||
Overslope height | 1cm | ||
Telecommunication | 4G | Supported, 4G transformation accessories need to be installed | |
5G | Supported, 5G transformation accessories need to be installed | ||
WIFI | Wifi module (AP6256) 2.4G&5GHz, supports 802.11a/b/g/n/ac protocol | ||
Regulatory system | Planning model | Autonomous obstacle avoidance | |
Track running | |||
Passing point | |||
Charging & battery life | Battery | Charging voltage: 43.2V | |
Capacity: 38.4V 25Ah | |||
Battery material: lithium iron phosphate battery. The decomposition temperature of lithium iron phosphate is about 600°C. The high temperature resistance of lithium iron phosphate can reach an electric heating peak of 350°C-500°C. | |||
Battery life: 10-15 hours Deploying charging piles can achieve 7*24h service |
|||
Standby time: 30 hours | |||
Charging method: Automatically recharge when low battery. You can also manually send back the pile command | |||
Time required for full charge: 5.5 hours | |||
Battery life: more than 2000 complete charge and discharge cycles | |||
Adapter | Working voltage: 100~240VAC, 50/60Hz | ||
Charging pile | Size: 375mm*160mm*355mm | ||
Weight: 4.35kg | |||
Input: 100-240V~50/60 Hz | |||
Output: 43.2V==5.0A | |||
Maping | Maping | Incremental mapping: supported | |
Cloud mapping: up to 10,000 square meters | |||
Scanning range: 360° | |||
Map editing | Coordinate points | ||
Charging pile | |||
Virtual wall | |||
Elevator area | |||
Elevator system | Elevator management system | Elevator Management: Management Platform | |
Ladder control equipment | Communication | 4G | |
User interface | Hardware interface | Thernet | rj45 |
WIFI | 2.4G/5G | ||
Audio | 3.5mm Headphone plug | ||
Power interface | DC 24V 16A | ||
DC 12V 10A | |||
DC 5V 2A | |||
Power management | Battery information | Support | |
Wheel | Number of main hubs | 2 | |
Hub motor size | 5.5 inch | ||
Motor voltage | 24V | ||
Universal wheel | 4 | ||
Guide wheel | 2 | ||
Suspension | Swing bar active suspension | ||
Housing ground clearance | 50mm | ||
Noise | ≤50dB | ||
Other | Emergency stop button | It is placed on the chassis and can be triggered by pressing the red button; | |
Switch | Ship type power switch; on/off key | ||
Platform | Remote monitoring platform | Real-time status monitoring of robots; | |
Real-time data visualization large screen | Display the real-time status and operational statistical analysis of robots under different businesses |
Suppliers with verified business licenses