| After-sales Service: | Life Time |
|---|---|
| Warranty: | 1 Year |
| Max Diameter of Workpiece: | Customized |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Introduction:
Steel bar (steel plate) bending tester HST-BT40 is a kind of equipment which is produced after the technical improvement of steel bar bending tester. The steel plate (plate) can be bent 180 ° in the forward direction, and the steel bar can be cold bent and plane reverse bent.
Its main parameters comply with and meet the relevant provisions in the latest standards:
GB/T232,GB/T1499.2-2018 steel for reinforced concrete Part 2: hot rolled ribbed steel bars YB/T5126-2003 test methods for bending and reverse bending of steel bars for reinforced concrete.
This equipment is an ideal equipment for steel mills and quality inspection units to test the bending and reverse bending properties of hot-rolled ribbed bars.
This steel bar bending testing machine has the advantages of compact structure, large bearing capacity, stable operation, low noise, LCD touch screen display of bending angle and setting angle, simple operation, intuitive and convenient maintenance.
2.Advantages:
1. It is designed and produced in accordance with the latest standards of GB/T232-2010 bending test method for metallic materials and GB/T1499.2-2018 steel for reinforced concrete Part 2: hot rolled ribbed steel bars.
2. The special axial fastening device of steel bar and the longitudinal fastening device of steel plate avoid the longitudinal sliding phenomenon of the test piece during the test. (this technology has been applied for a new patent for national use).
3. The LCD touch screen operating system has eliminated the old-fashioned key operation panel, which is not only more convenient to operate, but also increases the service life of the operating system by 5-6 times.
4. The protective net is equipped with a freely retractable gas spring, which can make the protective net open at any angle of its stroke.
5. Foldable handwheel handle, more beautiful and practical!
3.Technical parameters:
| Maximum diameter of bending reinforcement | φ 40mm |
| Maximum thickness of bent steel plate | 12mm |
| Positive bending angle | Any setting within 180 ° |
| Reverse bending angle | Any setting within 0-90 ° |
| Working disc speed | ≤ 20 ° / S |
| Motor power | 1.5kw |
| Machine outline (mm) | 1100×900×11400 |
| Machine weight | 1500Kg |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}