Basic Info.
Usage
for Experiment, for Air Conditioner, for Manufacture, for Refrigerate
Flow Direction
Centrifugal
Certification
RoHS, ISO, CE
I Inertia
780 / 0.0426g*mm2 / oz*in2
VCC Nominal Voltage
12v24v
Specification
50.4 (65.4) x 54.5 x 40.3 mm (1.98 (2.57) x 2.15 x
Product Description
Miniature Radial Blower:
C55H1
50.4 (65.4) x 54.5 x 40.3 mm
(1.98 (2.57) x 2.15 x 1.59 in)
* Housing and Impeller materials: Medical grade thermoplastics
* Lead Wire: 300mm (AWG22)
* Weight: 100 gr. (3.53 oz)
* Operational Temperature: -20 to 50 ºC / -4 to 122 ºF
* Three Phase Brushless Motor w/ Hall Sensor
* Connector # Molex Microfit 43025-1000 or 43025-0800
* Motor Internal Temperature Signal
* Note: This blower uses a brushless motor and needs a driver to operate
| | C55H1-12PS-01 | C55H1-24PS-01 |
VCC Nominal Voltage | V | 12 | 24 |
VCC Voltage Range | V | 9 ~ 14 | 10 ~ 27 |
IN freeblowing @Nom. Volt. | mA | 2'630 | 1'800 |
IN work. point @Nom. Volt. | mA | 2'440 | 1'680 |
IN static @Nom. Volt. | mA | 1'380 | 960 |
PN work. point @Nom. Volt. | W | 30 | 41 |
LInductance | mH | 0.1 | 0.33 |
RPhase-Phase | Ohm | 0.43 | 1.2 |
n freeblowing @Nom. Volt. | rpm | 43'100 | 49'700 |
n work. point @Nom. Volt. | rpm | 44'475 | 50'830 |
n static @Nom. Volt. | rpm | 51'320 | 56'880 |
V freeblowing @Nom. Volt. | l/min | 510 | 565 |
V work. point @Nom. Volt. | l/min | 207 | 239 |
P work. point @Nom. Volt. | Pa | 3'590 | 4'650 |
P static @Nom. Volt. | Pa | 4'600 | 5'650 |
I Inertia | g*mm2 / oz*in2 | 780 / 0.0426 |
M Mass | g / oz | 100 / 3.53 |
LpA(WP) | dB(A) | Depend on working point |
TOperations | °C / °F | -20 … +50 / -4 … +122 (in ice free conditions) |
Leads | mm / inch | 300 / 11.8 (AWG22) |
Connector | | Molex Microfit 43025-1000 (9 wires) or |
43025-0800 (8 wires) |
Housing / Impeller Material | Medical grade thermoplastics |
Ball Bearing | | √ |
Tacho | | √ |
Motor Internal Temperature Sensor | √ |
Electrical Connections | Wire | Description | Connector Pin |
Blue Purple Yellow Orange White Grey Green Brown Red | HA Hall sensor A HB Hall sensor B VHall Vhall 4.5 ... 24 VCC W3 Motorwinding W IT Internal Temperature HC Hall sensor C GND Ground W1 Motorwinding U W2 Motorwinding V | 8 wires 9 wires |
(option) (standard) |
PIN 1 PIN 1 |
PIN 2 PIN 2 |
PIN 3 PIN 3 |
PIN 4 PIN 4 |
N/A PIN 5 |
PIN 5 PIN 6 |
PIN 6 PIN 7 |
PIN 7 PIN 8 |
PIN 8 PIN 9 |
Blower Limits and Warning | * No Hot-Swap allowed |
* Max. allowed temperature on Heat Sink: 75º C |
* Max. cont. speed: 61'000 rpm |
* Max. cont. current allowed at 25º C / 50º C: -12: 3'200 mA / 2'600 mA |
-24: 2'000 mA / 1'700 mA |
* Max. cont. speed allowed at 25º C / 50º C: -12: 59'000 rpm / 50'000 rpm |
-24: 61'000 rpm / 52'000 rpm |
* Blocking the impeller more than 30 seconds may result in damages or destruction of the blower unless current is limited to values listed above. |
* A minimum air flow is required at VCC higher than Nominal Voltage to avoid the air in the blower to overheat by compressing and mixing. |
Manufacturing System | Blowers manufactured by ISO9001-2008 certified manufacturer |
Motor Internal Temperature Signal (IT) | The temperature of the inside of the motor is indicated by a voltage (dependent on VHall) on IT (0 - 10 V nonlinear signal) |
1. Who are we?We are based in Zhejiang, China, start from 2018, sell to North America, South America, Eastern Europe, South Asia. 2. How can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.What can you buy from us?Miniature blowers:Miniature blowers:1. Small (diameter 54-105mm) but high performance, max pressure up to 14kpa.2. High pressure, high speed(max up to 60000rpm).3. High efficiency, power conversion efficiency up to 55%.4. With internal drivers.5. Made of biocompatible, medical grade materials6. Long life, over 30,000 hours in bi-level mode.7. Low noise, <29 db in home ventilators.Industrial axial fans:Boreasa provides a wide range of high-performance, reliable, and solid quality F-series and VA-series fans, meeting the most stringent environmental specifications such as shock, vibration, humidity, temperature extremes, salt spray, moisture, and EMI. Meanwhile, we are willing to offer a customized solution to satisfy our customer's needs.Drivers(controller) :Boreasa drivers were designed especially for the Boreasa blowers and are tuned to provide best performances for these blowers.Our" E2" series drivers are closed loop controlled (speed) and the speed is controlled by a voltage as standard. However, they can be ordered in open-loop, and/ or controlled by PWM or a Serial connection.Electric motors:The Boreasa miniature high-speed brushless motor with electronic commutation has the advantages of excellent torque characteristics, high power, wide speed range, and long service life. Thanks to the optimized magnetic circuit design and the advanced dynamic balancing technology, the Boreasa miniature high-speed brushless motor provides excellent motor performance and incomparable stability.4. Why should you buy from us not from other suppliers?Boreasa has an international R&D team with completely independent intellectual property rights. The product quality meets the world's top standards and is widely used in high-end manufacturing fields such as medical, industrial, and aerospace. 5. How about customized service?
Although Boreasa has a standard line of products, we also work with customers to supply them with customized products meeting their needs.Boreasa's broad experience and technical expertise in the development and design of high performance motors and blower assemblies has been utilized to develop our current product lines and new lines under development.Our appreciation of the customers' system performance requirements, thermal constraints, mechanical interface, noise, and cost factors allows Boreasa to offer unique solutions for our customer's applications.
Address:
level 2, Building 5, No. 1180, Bin′an Road, Changhe Street, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Boreasa is a brand of high performance miniature blowers, fans and drivers. Although Boreasa has a standard line of products, we also work with customers to supply them with customized products meeting their needs.
Boreasa′s name comes from the name of one of the gods of ancient Greece: The god of wind Boreas.
Boreasa was formed to join the dynamism of Western Engineering and the economy of Asian manufacturing. Our blowers are designed in California and manufactured in a brand new "state of the art" plant in China, which is ISO 9001: 2015 certified.
Our emphasis is in the quality of our products and in the understanding of our customers′ needs so we can supply them with the best solution available.
Boreasa′s broad experience and technical expertise in the development and design of high performance motors and blower assemblies has been utilized to develop our current product lines and new lines under development.
Our appreciation of the customers′ system performance requirements, thermal constraints, mechanical interface, noise, and cost factors allows Boreasa to offer unique solutions for our customer′s applications.
Boreasa′s goal is to design and manufacture high performance and highly reliable air moving products with an emphasis on quality. We are proposing solutions for consumer, medical, industrial, and military applications at prices which are bearable for the highly competitive Asian markets.