| After-sales Service: | Online Service |
|---|---|
| Warranty: | 12 Month |
| Certification: | ISO, CE |
| Condition: | New |
| Rated Load: | 1-3t |
| Transmission: | Hydraulic |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Shanmon loader is a highly reliable and cost-effectibe loader for handling loose materials,widely used in such occasions as farms,small mined,lumber mills and urban construction. Its capacity ranges from 1ton to 6ton.
| Technical parameter | Parameter value | |||
| Captain (bottom of bucket on the ground)(mm) | 5535±30 | |||
| Engine Width (outside wheel)(mm) | 1880±10 | |||
| Bucket width(mm) | 1900±5 | |||
| Engine Height (top of cab)(mm) | 1790±10 | |||
| Wheelbase(mm) | 2450±15 | |||
| Wheel tread(mm) | 1480±5 | |||
| Minimum Clearance(mm) | 280±5 | |||
| Rated load(kg)rated loading | 2000 | |||
| Nominal bucket capacity(m3) | 1.0 | |||
| overall weight(kg) | 5500±30 | |||
| Speed of each gear(Km/h) | Forward, first gear | 9±0.5 | ||
| Forward, second gear | 22±1 | |||
| Step back, first gear | 9±0.5 | |||
| Step back, second gear | 22±1 | |||
| Maximum traction force(KN) | 38.2 | |||
| Maximum grade ability | 30° | |||
| Maximum dump height(mm) | 1700 | |||
| Discharge Angle at any position | ≥45±1° | |||
| Unloading distance(mm) | 1000 | |||
| The bucket turned over into a corner | Highest position | 54°±1° | ||
| Lowest position | 45°±1° | |||
| Shipping position | 50°±1° | |||
| Automatic levelling function of bucket | yes | |||
| Maximum breakout force(KN) | 48.8 | |||
| Tipping load(KN) | 25 | |||
| Depth of excavation(mm) | 14 | |||
| Boom lifting time(S) | 4.8±0.2 | |||
| Boom down time(S) | 3.3±0.3 | |||
| Bucket discharge time(S) | 1.1 | |||
| Minimum turning radius outside bucket(mm) | 6828±50 | |||
| Body Angle | 35°±1° | |||
| Rear axle angle | ±12° | |||
| Engine(II) | Model | YT4A2-24 | ||
| Type | Vertical, in-line, water cooled, 4-stroke diesel engine | |||
| -NO. of cylinder-bore | 4-108 | |||
| Rated power(KW) | 55 | |||
| Rotational speed(r/min) | 2200 | |||
| Min. fuel-consume ratio(km.h) | 242 | |||
| Maximum torque(N.M) | 285 | |||
| System working pressure (Mpa) | 16 | |||
| Brake system | Service brake | air assist disc brake on 4 wheels | ||
| Parking brake | Manual disk brake | |||
| Torque converter | YJ-280A | |||
| Gearbox mode | Power shaft normally engaged straight gear | |||
| Drive axles | First reduction of circular-arc bevel gear | |||
| Tyre size | 16/70-20 | |||
1.Good performance: Adopting full hydraulic transmission, it can bring the power of engine into full play amply. Adjust the output torque automatically according to loads change, and it can achieve continuously variable transmission. It enables the loader working efficiency and easy maintenance
2.High productivity: Perfectly designed to enable the machine have super lifting force and automatic leveling at high position.
3.Good capability in climbing the slope: 4-wheel driven, strong driving power.
4.Operation flexible: Center-point frame articulated and small turning radius makes it convenient to work in confined places.
5.Safe and reliable: Single-line air-assisted brake system.
6.Going-through capability: The rear axle can swing around the center hanger frame, improved the going-through capability of the whole machine.
7.Operation comfort: Continuously variable transmission, full hydraulic steering system steady and reliable
1, What kind of wheel loaders supply?
--- We can supply the loaders from 1ton to 6tons..
2,What is the lead time normally?
-- About 15-20days after getting the deposit money from client;
3,What is the payment terms?
-- T/T. 50% deposit in advance and 50% balance before shipment;
4,How about the shipment method?
-- Normally, it is by FCL container.
5, How about your quality control?
--We have engaged in the wheel loader field for many years, quality control is strict when producing, and will test machine after finished and make qualification report.
6, How about your warranty and after-sale service?
---The warranty for the tractor is 1 year, if any part broken within one year, we will send the parts to client by express.
If there is question about the operation or using, we will give technical support to guide client to do well.
7, Any free spare parts supply for the machine?
--- Normally, we will give extra oil and diesel fitlers for spare parts.But it depends the order quantity.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}