1.Supporting 2 RJ45 ports
2.Supporting 10/100M, full/half duplex autosensing
3.Supporting auto-MDI/MDIX
4.Rate Limit function, 32Kbps
5.Supporting 1600byte super data packet transmission
6.Supporting remote power off alarming
7.Economical management function within bandwidth
8.Supporting hot plug
9.Supporting Remote management
10.Easy installation with complete LED indicators for working situation
11.With powerful network management function, supporting WEB and SNMP
12.Supporting 2U chassis (16 slots) and standalone use
Description
2 RJ45 Managed Fast Media Converter is an IEEE 802.3ah OAM compliant copper to fiber Fast Ethernet solution designed to make conversion between 10/100Base-TX and 100Base-FX with SFP modules and fixed type 1×9 modules. With SNMP and Web-based management in the 2U 16 Slots Managed Media Converter Chassis, the administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. Converter settings include bandwidth control, duplex, and speed configuration, VLAN tagging, limited Q-in-Q support and SFP DDMI. When used as stand-alone converters, it can be managed by a friendly Web Smart user interface via any web browser.
More Details of 2 RJ45 Managed Fast Media Converter
FR6000 Series is a Centralized Network Management Platform that provides 8 or 16 slots multi-service including Managed Media Converter Card, OEO Converter Card, 1+1 Protection Switching card, CWDM/DWDM MUX/DEMUX Card, etc. All interface cards, fans, management module Card and AC/DC redundant power supply are hot swappable, allowing online field replacement.
TELEFLY's 2 RJ45 Managed Fast Media Converter allow the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using. View the two different form factors as below:
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
SNMP Management:
Specificatons:
| Physical Port |
| Copper Port |
10/100Base-T RJ45×2 |
| SFP Port |
100BASE-X SFP interfaces |
| Fiber Mode |
100BASE-X, 2km-160km, SC/ST/FC |
| Parameters |
| Ethernet Standards |
IEEE 802.3 10BASE-T |
| IEEE 802.3u 100BASE-TX/100BASE-FX |
| IEEE 802.3x flow control and back pressure |
| TS-1000 |
| Packet Length |
1536bytes |
| Transmission Mode |
Store and Forward |
| Exchange Property |
Delay time: < 7ps |
| Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps |
| DIP Switches |
|
| Managed Features |
Supports LFT (Link Fault Pass Through) |
| Supports Digital Diagnostic Monitor Interface (DDM) for SFP |
| Supports OAM/IP in-band management |
| Ingress/Egress Bandwidth control per port |
| Supports 16 IEEE 802.1Q Tag VLAN Group |
| SNMP alarm trap for power loss and port link down |
| Remote loop back test |
| Dying gasp (remote power failure detection) |
| LED Indicator |
Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link, LFP |
| Power Information |
| Power Input |
DC 5V |
| Power Consumption |
Full-load<4W |
| Physical Property |
| Dimensions |
120mm×90mm×22mm |
| Installation Mode |
wall-mountable |
| Weight |
100g |
| Working Environment |
| Operating Temperature |
0°C~50°C |
| Operating Humidity |
10%~90% non-condensing |
| Storage Temperature |
-10°C~70°C |
| Warranty |
| MTBF |
50,000 hours |
| Defects Liability Period |
1 year warranty, lifetime technical support |
| Certification Standard |
| EMC |
FCC Part15 Class A |
| CE-EMC/LVD |
| RoHS |
| EN61000-4-2 (ESD), EN61000-4-3 (RS) |
| EN6100044 (EFT), EN6100045 (Surge) |
| EN61000^1-6 (CS), EN61000-4-8 |
| EN61000-4-11 |
Company Profile
TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.
Cerfifications Showing
Our Exhibition
Professional packing and transportation
Audited Supplier 
){kind=link}
){kind=link}