Instruction for use
Applicable to the product F-HT-612A
Please read the instructions before use
1.Parts to introduction
2.The main function
|The basic specification||Operating instructions|
|Rated voltage: 120 V ~ . |
Fan power: 9 W;
"I" setting: 1000w,
"II" setting: 1500 w.
Rated current: 12.5 A.
Rated frequency 50/60Hz.
1. Off setting
2. Fan only
3. "I"Fan and low power
4. "II"Fan and high power
3.The product features
Thermal cut-out(manual reset):
This product use cut-out must be manual reset, need to disconnect the power supply and wait 15 minutes to reset after the trigger
FEATURES - OPERATIONS
Working voltage: 120V AC 50/60Hz
1. Carefully remove your heater from the box. Please save the carton for off-season storage.
2. Make sure the unit is in the Off (O) position before plugging the heater into the outlet.
3. Avoid overloading your circuit by not using other high wattage appliances in the same outlet. At 1500 Watts, this unit draws 12.5 Amps.
Turn the Mode Control to the desired setting:
O - Off Mode
If you want to shut off the heater at any time during operation, turn the Mode Control to Off (O) position. Power Light will remain lit until heater is turned to Off (O).
- Fan only Setting
Heater will run at fan-only without heat output.
1 - Low setting
The heater will run continuously at 1000W.
2 - High setting
The heater will run continuously at 1500W.
NOTE: To start heater operation, make sure the Thermostat Control is turned fully clockwise to the highest position.
1. Before setting the thermostat, allow heater to operate and warm up the room. Turn the Thermostat Control clockwise to High to start the heater.
2. When the desired temperature comfort level is reached, lower the thermostat setting until the fan/heater stops operating. This is done by moving the Thermostat Control counterclockwise toward the Low setting.
3. The control will now automatically maintain the pre-set temperature level by cycling the heater ON and OFF.
NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, raise the thermostat setting.
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN OPERATION.
Poly-Products is an international design and manufacturing company with headquarters in Hong Kong and offices in USA & Europe. Our manufacturing facilities are located in Shunde, Foshan, China.
We have more than 35 years of experience manufacturing for some of the top brand names in the world. As a partnership supplier with Philips, Robert Bosch, Leapfrog, Panasonics, Conair, Siemens, Omron, Walmart, L'OREL and many more, we have won GOLD supplier awards more than 10 years for manufacturing chargers and power adapters for their products such as Shavers, Toothbrush, Power Tools, Hair Creepers, LED Mirrors, Smart Mirrors, Face Cleaners/Massagers, Blood Pressure Monitors, Children Learning Tablets and so many others.
Poly-Products head office is located in Hong Kong : trading hub of Asia Pacific. Our first manufacturing facility has started operation in 1980 and had been servicing our clients for 35 remarkable years; Business went superbly well and the company decides to expand their market into different regions; In year 2018, the company has over 1,300 elite employees in 4 major sales offices in China, Hong Kong, Japan, and United States of America; alongside with 2 joint venture companies and 3 main manufacturing facilities with over 20,000 metre square of production area.
WE ARE THE BEST IN THE MARKET
We have extensive knowledge in Product Design. Our in-house design team and engineering staff can custom design products or work with you to finalize your designs. And because we have our own tooling, injection, PCB factory and assembly plant, we control all aspects of your project from beginning to end. From design to delivery you can count on Poly-Products Industries to deliver your products on time and on budget..
We are proud of the many clients we have served. Together we have grown to become one of the best design to build OEM and ODM manufacturers in China. With offices in Hong Kong, Tokyo and Boston we are committed to providing the best in customer service wherever our clients might be.
Don't trust your project to just any manufacturer; use the same company that Bosch, Philips, Panasonic, Leapfrog and so many other famous brands have trusted for more than 35 years.
POLY-PRODUCTS BUSINESS SOV
As shown on the SOV diagram; Our major investments are allocated into Small Home Appliances, Smart Lightings, and Power Tools. Other smaller categories such as Robot, Health Devices, Personal Caring, Hair Styling will be slowly picking up pace as we are allocating more capital in those areas on a yearly basis.
Poly-products Industries co. Ltd's clients are spread all over the globe. Our main market and clients are brands from the Europe and USA such as Philips, Kenwood, Bosch, ESKAA, and etc. Followed by Asia Pacific nations such as Mitsubishi, and Fujitsu from Japan.
OUR KEY CLIENTS
Q: Can I get samples from you?
A: We are honored to offer you samples for quality check.
Q: Are you a manufacturer or trading company?
A: We are a manufacturer, providing OEM & ODM service.
Q: What payment methods do you accept?
A: We can accept T/T, L/C.
Q: What is your product quality?
A: Our raw materials are purchased from qualified suppliers. And we have a strong quality control team to guarantee our quality. We always care what you care!!
Q:What's your MOQ?
A: The MOQ is determined by negotiation.
Q:How much the transportation freight will be?
A: The freight depends on the weight & packing size and your loading and discharging port.
Q:How can I get your price list?
A: Please feel free to contact us on trademanager online or send us an inquiry, thenwe can send you the price list and more information by email.