| Type: | EP200 |
|---|---|
| Material: | Rubber |
| Inside Material: | Polyester |
| Samples: |
Customized
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| ZHENXING CONVEYOR BELT CONVEYOR THE WORLD | ||||||
| Fabric conveyor belt-Nylon (NN) conveyor belt, EP conveyor belt, Cotton (CC) conveyor belt | ||||||
EP Conveyor Belt is the combination of Polyester in warp and Nylon in weft. EP belt provides far much lower elongation than NN belt and it can also be used for special purposes. |
Features of EP Conveyor Belts: • Plys : 1 - 12 • Top cover thickness : 25.4 mm (1") max • Edge : Cut edge or moulded edge • Max width : 2300 mm • Total thickness : 50 mm (2") max • Bottom cover thickness : 0 - 25.4 (1") mm • Max. fabric strength : EP / NN 600 • Belt with cross breakers available |
| Belt Type | Fabric | Single Fabric Strength | Cover thickness (mm) | Plies | Belt Width | Belt Length | |
| Type | (N/mm) | Top Cover | Bottom Cover | (mm) | (m)/roll | ||
| CC | CC-56 | 56 | 3.0-6.0 | 1.5-6.0 | 3~12 | 500-2400 | 200 |
| NN | NN100 | 100 | 2~10 | ||||
| NN125 | 125 | ||||||
| NN150 | 150 | ||||||
| NN200 | 200 | ||||||
| NN250 | 250 | ||||||
| NN300 | 300 | ||||||
| NN400 | 400 | ||||||
| NN500 | 500 | ||||||
| NN600 | 600 | ||||||
| EP | EP100 | 100 | 2~8 | ||||
| EP125 | 125 | ||||||
| EP160 | 160 | ||||||
| EP200 | 200 | ||||||
| EP250 | 250 | ||||||
| EP300 | 300 | ||||||
| EP350 | 350 | ||||||
| EP400 | 400 | ||||||
| EP500 | 500 | ||||||
| EP600 | 600 | ||||||
| Item | Adhesion between fabrics (N/mm) | Adhesion between rubber and fabric(N/mm) | |
| (Cover) ≤1.5 mm | (Cover) >1.5 mm | ||
| (Max)≤ | 20 | 20 | 20 |
| (Average)≥ | 5 | 3.5 | 4.5 |
| (Min) ≥ | 4 | 2.5 | 3.5 |
| Mining Coal Industry Multy-ply Rubber EP conveyor belt | |||
| Total Tensile Strength | Fabric Type | Top Cover Thickness | Bottom Cover Thickness |
| ( N/mm) | (mm) | (mm) | |
| 200-800 | EP100 | 3.0/4.5/6.0 | 1.5/3.0 |
| 315-1250 | EP150 | 3.0/4.5/6.0 | 1.5/3.0 |
| 400-1500 | EP200 | 3.0/4.5/6.0 | 1.5/3.0 |
| 500-2000 | EP250 | 3.0/4.5/6.0 | 1.5/3.0 |
| 500-2000 | EP300 | 3.0/4.5/6.0 | 1.5/3.0 |
| 630-2500 | EP400 | 3.0/4.5/6.0 | 1.5/3.0 |
| Rubber Cover Property: | ||||
| Item | Rubber grade(DIN22102) | |||
| W | X | Y | Z | |
| Tensile Strength (N/mm2)>= | 18 | 25 | 20 | 15 |
| Elongation at break(%) ≥ | 400 | 450 | 400 | 350 |
| Abrasion (mm3)<= | 90 | 120 | 150 | 250 |
| Chevron/Pattern Conveyor Belt | ||||||
Chevrons belt with chevrons moulded and directly integrated in the cover of the conveyor belt, in order to increase the friction between the belt and material conveyed.
Character:
Suitable for handling bulk materials or bags up to 40ºC, slip resistant and big conveying capacity.
Pattern:
Open V,Close V, L type, H type, Multi-V type etc.We have more than 40 type pattern mold. Special pattern model can also be manufactured according to customers' requirements.
| Steel Cord Conveyor Belt | ||||||
1. High tensile strength: The belts are suitable for large span, long distance transportation of materials.
2. Small elongation in use: The belts need only a very short take-up stroke distance.
3. Small diameter of drive pulley: The carcass has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue. Therefore, drive pulley of smaller diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord: The steel cords are coated with zinc on their surface, and also the rubber used has the property of good adhesion with steel cords. Therefore, the rubber is tightly adhered to the steel cords and is resistant to shock and difficult to drop, so the rubber belts are long in service life.
5. Even tension of steel cords: Out of our advanced techniques in manufacturing, the steel cords are very evenly arranged and have the same tension, so the belts are well balanced in running and difficult to run deviation.
6. Good troughability: As the carcass has no transverse skeleton, it is easy to form a deep trough, so the belts can load more materials and prevent the materials from escaping.
7. Good troughability: As the belt body has no transverse skeleton, it is easy to from a deep trough, so the belts can load more materials and prevent the materials from escaping.
8. Inspection of the belt with X-rays: Users can take X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
| Strength grade | Tensile | Cord pitch | Cord diameter | Min.breaking | Min.cover |
| strength | (mm) | (mm) | force | thickness | |
| (KN/m) | (KN) | (mm) | |||
| ST-500 | 500 | 10 | 2.5 | 5.5 | 4 |
| ST-630 | 630 | 10 | 2.8 | 7 | 4 |
| ST-800 | 800 | 10 | 3 | 8.9 | 4 |
| ST-1000 | 1000 | 12 | 3.7 | 12.9 | 4 |
| ST-1250 | 1250 | 12 | 4.2 | 16.1 | 4 |
| ST-1400 | 1400 | 12 | 4.3 | 18 | 4 |
| ST-1600 | 1600 | 12 | 4.7 | 20.6 | 4 |
| ST-2000 | 2000 | 12 | 5.3 | 25.6 | 4 |
| ST-2250 | 2250 | 12 | 5.3 | 29 | 4 |
| ST-2500 | 2500 | 15 | 6.8 | 40 | 5 |
| ST-2800 | 2800 | 15 | 7 | 44.8 | 5 |
| ST-3150 | 3150 | 15 | 7.8 | 50.5 | 5.5 |
| ST-3500 | 3500 | 15 | 8.2 | 56 | 6 |
| ST-4000 | 4000 | 15 | 8.8 | 63.5 | 6.5 |
| ST-4500 | 4500 | 16 | 9.7 | 76.3 | 7 |
| ST-5000 | 5000 | 17 | 10.9 | 91 | 7.5 |
| ST-5400 | 5400 | 17 | 11.3 | 98.2 | 8 |
| ST-6300 | 6300 | 19.5 | 12.8 | 130.4 | 10 |
| ST-7000 | 7000 | 19.5 | 13.5 | 142.4 | 10 |
| ST-7500 | 7500 | 21 | 13.8 | 166.7 | 10 |
| ST-8000 | 8000 | 21 | 14 | 180.9 | 10 |
| ST-9000 | 9000 | 21 | 14.8 | 203.2 | 11 |
| ST-10000 | 10000 | 21 | 15.5 | 225 | 11 |
| Solid Woven Conveyor Belt | ||||||
|
Solid Woven Flame Retardant Conveyor Belt: Pressed PVC type, both top and bottom covers are PVC, thickness of each side can be up to 4mm, the belt has much more advantages than non pressed PVC belt on impact resistance, water soaking, with longer service life, higher fastener holding. |
Solid Woven Flame Retardant Conveyor Belt: PVG type is covered with covers mainly composed of rubber, which further improves the troughability, resistance to wetness and slip, resistance to low temperature, elongation and wear resistance of the belt. Both top and bottom cover are PVG, the belt can be used to carry materials mixing some water at the slope no more than 20 degree,elongate life of belt. |
| Corrugated Sidewall Conveyor Belt | |||||
| T Cleat Type | T75 | T110 |
| Height(mm) | 75 | 110 |
| Min. Pulley Dia. (mm) | 200 | 300 |
| TCS Cleat Type | TCS280 | TCS360 |
| Height(mm) | 280 | 360 |
| Min. Pulley Dia. (mm) | 700 | 700 |
| TC Cleat Type | TC110 | TC140 | TC180 | TC220 |
| Height(mm) | 110 | 140 | 180 | 220 |
| Min. Pulley Dia. (mm) | 350 | 370 | 450 | 500 |
| Heat-Resistant Conveyor Belt | ||||||
Tyeps of Heat resistant conveyor belt| Heat resistant conveyor belt specifications | |||
| Grade | Max. Temp. on belt surface ('C) | Max. Temp. of material handled('C) | Application Areas : |
| HR(T1) | 125 | 180 | Mainly used in Paper, Foundries, Hot Pellets, Hot Chemicals & Fertilizer plants etc. |
| SHR(T2) | 150 | 200 | Mainly used for conveying Sintered ore, Hot Cement, Hot Powder, Coke, Hot Chemicals & Fertilizers etc |
| UHR(T3) | 180 | 220 | Mainly used to handle red hot materials such as Cement, Clinker, Sintered Ore and Phosphate etc. |
| Heat resistant conveyor beltlayer to layer adhesion strength | |||
| Item | interlayer of cloth | cover layer and cloth interlayer | |
| Thickness of the cover layer≤1.5mm | Thickness of the cover layer>1.5mm | ||
| The average value of the longitudinal specimen shall be no less than | 3 | 2.2 | 2.6 |
| The peak value of the longitudinal specimen | 2 | 1.6 | 2 |
| Heat resistant conveyor belt abrasive wear of the cover rubber | |||
| Item level | Abrasive wear | ||
| t1 | t2 | t3 | |
| First quality |
0.8 | 1.0 | 1.0 |
| accepts |
1.0 | 1.2 | 1.2 |
| HR & OR Belt (Heat & Oil Resistance) | |||||
|
Benefits:
|
Application:
|
COVER GRADE SELECT CHART
| Cover Type | Standard/ Grade | Minimum Tensile Strength |
Minimum Elongation at Break (%) |
Maximum Swelling in Fuel B (%) |
Reference Material |
| High Oil Resistant | AR-HiOR | 15 | 350 | 35 | Convey materials like Crude petroleum, oil coated products,oil coated products, etc. |
| Oil Resistant | AR-OR IS-OR, AS-Z, DIN-G |
12.5 | 350 | 70 | Materials like light oil coated sand, food grains, oil-seeds, etc. |
| Moderate Oil Resistant | AR-MOR | 12.5 | 350 | 110 | Materials like oil seeds, wood chips, vegetable oil coated products, etc. |
| Oil and Heat Resistant | AR-SOR-HR | 12 | 300 | 70 | Heat resistant up to 125ºC, used for hot asphalt handling |
| High Heat and Oil Resistant | AR-SHR-SOR | 12 | 300 | 55 | Moderate heat resistant up to 100ºC,or handling tar coated material |
| Oil Resistant and High Abrasion | AR-OR-HAR | 12 | 300 | 60 | |
| Oil, Heat and Fire Resistant | AR-OR-HR-FR | 12 | 300 | 60 |
MATERIALS AND BELT SURFACE TEMPERATURES
| Materials Carried | Lump Size | Termperature of Material Carried | Belt Surface Temperature |
| Sintered Ore | 25-200 mm (1-8 inch) | 200-400ºC (390-750ºF) | 130-150ºC (270-300ºF) |
| Return of Sintered Ore | Below 10 mm (0.4 inch) | 260ºC (480ºF) | 150-190ºC (300-370ºF) |
| Coke | 100-200 mm (4-8 inch) | 70-100ºC (160-210ºF) | 50-60ºC 120-140ºF) |
| Raw Material | Below 30 mm (1.2 inch) | 180-220ºC (360-410ºF) | 100-120ºC (210-250ºF) |
| Clinker | 10-30 mm (0.4 - 1.2 inch) | 100-220ºC (210-440ºF) | 100-110ºC (210-230ºF) |
| Cement | Powder | 100-125ºC (210-250ºF) | 80-90ºC (170-190ºF) |
| Metal Powder | - | 170ºC (340ºF) | 120-130ºC (250-270ºF) |
| Molding Sand | - | 200-250ºC (390-480ºF) | 80-90ºC (170-190ºF) |
| Oil Resistant Conveyor Belts | |||||
Product features:
| Item | Tensile Strength / MPA | Elongation at break / % | Abrasion / mm3 | ||
| MOR | ≥14.0 | ≥350 | ≤200 | ||
| OR | ≥16.0 | ≥350 | ≤160 | ||
| Flame Resistant Conveyor belts | |||||
Flame Resistant rubber belting features: the belt is not removed, the elongation is small, the impact resistance, the tear resistance.
The type can be divided into PVC type (plastic surface), flame retardant belt coal mine special supplier + conveyor belt manufacturer PVG type (rubber face attached to PVC) solid woven flame Resistant belts to implement the mt914-2002 standard.
PVC fire Resistant Conveyor Belts is suitable for drying conditions of the dip Angle of less than 16 degrees.
| Fire Resistant Conveyor Belt | |||||
| BASIC MATERIALS | |||
| Code | Rubber type | Code | Rubber type |
| NR | Natural Rubber | EPDM | Ethylene-Propylene Rubber |
| SBR | Styrene-Butadiene Rubber | CR | Chloroprene Rubber |
| NBR | Nitrile Rubber | CSM | Chlorosulfonated Polyethylene |
| Coal Feeder Conveyor Belt | ||||
| Rough Top Conveyor Belt | ||||
| Pipe Conveyor Belt | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}