1000LM Solar PIR Motion Sensor 66 LED Wall Light With Remote Control Waterproof Solar Powered Lamp for Outdoor Garden Yard Path
Specifications:
Solar panels: 6V 3.5 W
Battery: lithium battery 3.2V 5000mAh
Maximum power: 7W
LED Specification: SMD 2835
Quantity of LED: 66
LED Maximum Lumen: 1000lm
Charging time: more than 6 hours in sunlight
Induction angle: 360 degrees
Induction Distance: 5-8 m / 16.4-26.2 ft
Remote Distance: 3-5 m
Waterproof grade: IP65
Color:Black/White
Lighting time: 5-8 hours in normal mode and 2-3 rainy days in induction mode
Installation steps:
1.Please charge the product for 6 hours before using it.
2. Press and hold the button for 5 seconds to start the circuit, and then select the required light mode.
3. Fix the bracket with two screws and lock the product with screws.
Usage method:
irst cover the solar panels completely or put them down on the desktop, then press and hold for 5 seconds to start the lamp, and then enter into several working modes.
Change the working mode every time you press the button, and the light flashes at the same time.
The working mode is switched cyclically as follows:
1. Bright + Induction Mode When someone comes over, the trigger circuit of the sensor activates the strong light; the light dims after the person leaves for 15 seconds. (Recommended preferred use)
2. Induction mode When someone comes over, the trigger circuit of the sensor activates the bright light; the light goes out 15 seconds after the person leaves. (Used in places with short lighting time)
3. High Brightness mode Highlight for 2 hours, change to mode 1 for 2 hours.(for use in special places)
4. Shutdown
Contact information
Please kindly contact me or let me know if any questions and we will response you with highest attention .
Alice Zhang
Shaanxi Hi-Tech Lighting Co., Ltd