1 Key Touch Pad Detector IC TonTouchTM IC TTP223N Electronic Component

General Description 

The TTP223/TTP223N TonTouchTM is a touch pad detector IC which offers 1 touch key. The
touching detection IC is designed for replacing traditional direct button key with diverse pad size. Low power consumption and wide operating voltage are the contact key features for DC or AC application.

Features          
                             
Operating voltage 2.0V~5.5V
Operating current @VDD=3V, no load, SLRFTB=1
At low power mode typical 1.5uA, maximum 3.0uA
At fast mode typical 3.5uA, maximum 7.0uA
@VDD=3V, no load, SLRFTB=0
At low power mode typical 2.0uA, maximum 4.0uA
At fast mode typical 6.5uA, maximum 13.0uA
The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V
Sensitivity can adjust by the capacitance(0~50pF) outside
Have two kinds of sampling length by pad option(SLRFTB pin)
Stable touching detection of human body for replacing traditional direct switch key
Provides Fast mode and Low Power mode selection by pad option(LPMB pin)
Provides direct mode,toggle mode by pad option(TOG pin)
Open drain mode by bonding option, OPDO pin is open drain output, Q pin is CMOS output
All output modes can be selected active high or active low by pad option(AHLB pin)
Have the maximum on time 100sec by pad option(MOTB pin)
Have external power on reset pin(RST pin)
After power-on have about 0.5sec stable-time, during the time do not touch the key pad, And the function is disabled
Auto calibration for life
And the re-calibration period is about 4.0sec, when key has not be touched at fast mode.
At low power mode the re-calibration period is the same 4.0sec normally,
When key detected touch and released touch, the auto re-calibration will be redoing after
about 16sec from releasing key
The sensitivity of TTP223N is better than TTP223's.
But the stability of TTP223N is worse than TTP223's.

Applications

Wide consumer products
Button key replacement

Pad description