Suzhou, Jiangsu, China
Business Type: Manufacturer/Factory
Parameters of the project | U. | ZKS400 | ZKS500 | ZKS630 | ZKS800 | ZKS1000 |
Table stroke | mm | 430*320 | 500*400 | 630*500 | 800*630 | 1000*800 |
Table size | mm | 730*480 | 790*510 | 970*680 | 1360*820 | 1350*1000 |
Machine tool dimensions | mm | 2110*1550*1280 | 2100*1800*1400 | 2370*2050*1650 | 2500*2400*1940 | 2400*2600*2100 |
Maximum load of table | kg | 400 | 500 | 800 | 1000 | 1500 |
Maximum cutting thickness | mm | 300 | 300 | 300 | 300 | 300 |
Highest finish | um | Ra≤0.8 | ||||
The machining accuracy | um | ±5 | ||||
Positioning accuracy | um | |||||
Repetitive positioning accuracy | um | ±5 | ||||
Filtration precision | um | |||||
Normal cutting taper | degree/mm | ±3 | ||||
Normal cutting current | A | 10A | ||||
Working fluid tank capacity | L | 95 | ||||
The pump power | KVA | 0.37 | ||||
Machine tool power consumption | KVA | <1 | ||||
Machine net weight | kg | 2500 | 2800 | 3500 | 4000 | 4500 |
Power supply for machine tool | Three-phase 380V±10%,50Hz/60Hz | |||||
Environmental conditions | Temperature:-5°~40° Humidity:40~80% |
It is based on Windows/Linux CNC control system, this system runs on Windows XP WIN7 WIN10 WIN11 and other common operating systems, based on Ethernet communication, do not need to insert cards, Avoid the bad contact problems that often occur in the plug-in type.
No driver installation is required, plug in the network cable to open the software can be used, the system functions and advantages are:
1, Ethernet based communication, good stability, drive free, easy to install and use.
2, Ethernet communication, do not pick a computer, compatible with 99% of the market's computers, as long as there is a network port.
3. The software runs on the 32-bit or 64-bit operating system of WinXP-Win11.
4, software with intelligent wire transport, water pump, high-frequency and other direct processing.
5, support one key wire feeding function, automatic switch to low wire speed and small current mode (high frequency parameters can be preset), convenient wire feeding and touch number.
6, support duty function, automatic night machine on duty, processing completed or broken wire, short circuit and other abnormal state, the computer automatically shut down and then cut off the host power supply, safety and energy saving.
7, servo support X,Y,U,V,Z,A (rotating axis) and W (servo wire transport).
8. Support electronic handwheel or push-button handwheel.
9, support graphics drive mode, stable processing, no cutting wrong.
10, support intelligent knife repair mode, when repairing, adjust the sampling mode, make knife repair more stable.
11, support the processing of temporary axis (XY, or Z axis lifting), used to take waste, automatic back to the original processing point.
12. Supports up to three user coordinates.
13, support AR graphics automatic rotation, touch two points, graphics automatic rotation.
14, support two-dimensional or three-dimensional graphics display.
15, support any Angle of the graph rotation and symmetry, taper can also be rotated and symmetric oh.
16, support simple graphics template generation, straight line, square, circle, serpentine line, automatic generation processing.
17, support grating closed-loop function (need to match the function box).
18, support encoder feedback detection, pitch compensation.
Support XY axis back to mechanical origin function, automatically find servo motor encoder origin.
20, support XYUV software limit, exceed the automatic prompt.
21, support XY axis hardware limit function.
22, support motor, encoder, handwheel and other direction switch.
23, according to the screen resolution setting, automatic switch landscape or vertical screen.
The first CoolCut intelligent wire cutting programming and control integrated software, based on Ethernet communication, computer without card, can run in WinXP-Win11 32-bit or 64-bit operating system; Servo supports X,Y,U,V,Z,A (rotating axis) and W (servo wire transport); Support AR graphics automatic rotation, touch two points, graphics automatic rotation and other new functions.
Independent core technology, exclusive slow wire stripping power supply technology (National Copyright Number: 2018SR156739);
High speed without electrolytic high frequency, inhibit electrolytic corrosion, improve surface quality; Special materials in no electrochemical machining, the surface is not easy to oxidation discoloration;integrated servo medium speed wire cutting machine, the minimum occupation area, create the maximum value; High efficiency, fast cost recovery, 30% faster than other brands;
Original non-electrolytic power supply technology, tap water + ordinary oil, saving thousands of yuan of annual cost;
In response to the national call, exclusive high-frequency power saving 70%, energy conservation and emission reduction;
There is no need for professional technician to operate the machine, no need to worry about technician job-hopping, the software has its own intelligent database.
We use high quality machine parts.
If you want to know more about outr products,please click here!!!
Our Strength
The manufacture of these machines requires the operation of large machines.
The machines have been packed and shipped ready for delivery to the customer's location.
Q1: In software pictures everything is in Chinese, can be changed to English?
A1: Yes, the system can be set to all English.
Q2: Are you trading company or manufacturer ?
A2: We are factory.
Q3:How do you pack the machines when you ship them?
A3:We use standard export wooden cases for packing.
Q4:Could your engineers go to our factory to install the machine and train our workers?
A4:Sorry, due to the epidemic, our engineers are unable to provide on-site guidance, but we can provide remote guidance through third-party software.
Q5: Before order Can you send a edm drill machine sample for reference?
A5: We are glad to send edm drill machine samples for your inspection. Standard samples can be free, but you may need to pay the express fees.
Q6:What's your MOQ?
A6:Our MOQ is one set for each machine.
Q7: What about the price?
A7: We promise the price we offer is lowest if same application, only to enlarge the market share and given you cost price for consumable parts.
Q8:Could you plus use our own brand on your machine ?
A8:Yes,we can do it according to your request.
Q9:Could you modified and production machine according to our designer ?
A9:Of course yes,but order quantity each model more than 6 sets
Q10:Whats your fast delivery time ?
A10:If have stock after we received prepayment with 15days can arrange shipment
Generally delivery time around 30 days not include national holiday.
Q11: How to solve the quality problems after sales?
A11: Take photos or video of the problems and send to us After we check and confirm the problems, within 24 hours days,we will reply satisfied solution for you.