Automatic Edge Banding Machine 465JCH
Suitable for straight line edge banding
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability, pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance, longer service life.
- Pre-milling system
In gluing system, the glue box is coated with Teflon, which makes the box cleaning easier. The glue box has the temperature maintaining function and can shorten heating time and avoid the glue carbonization. The machine can use the high temperature EVA hot melt glue and can deliver the glue by spiral structure. The glue box size is 200*150*450mm.3.Feeding and edge cutting system When the single unit feeding system can be used to load the strip (optional) and roller type edge bands and the edge band thickness can be 0.4~3mm. If the single work unit can not meet the working requirements, the 2-10 feeding units can be selected. The edge cutting cylinder is controlled by double solenoid valves. 4 Press systemThe precise large press wheel and glue wheel can work together to ensure the press effect. The small press wheel are composed of 2 upper and lower cone wheels and 1 straight wheel. The upper and lower cone wheels can ensure the good press effect. The large and small press wheels are controlled by the separate pressure control valve. Optional: One large wheel can be equipped with 5 small wheels. 5 End trimming systemAdopt the imported precision linear guider, the automatic profiling tracking and high frequency and high speed motor of 0.37kw to ensure the smooth cut surface.6. Fine trimming systemRough trimming motor is 0.75kw high frequency motor. The rough trimming tools are the Φ69mm four tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 45°. Optional:High-power high-frequency motor 1.1kw. 7. Corner trimming system To process the round / duck mouth / right angles caused by end trimming to form a perfect round angle.Use 0.37KW high frequency motor and R2.5,Φ70mm ,3Z carbide tools. If the work piece has hinge hole or other processing holes on surface, the integrated large profile wheel is optional. Match big profile wheel to process panels with hinge holes or other processing holes on surface. 8. Scrapping system It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure. Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of cutting point. 9.Hogging systemSingle lateral hogging depth can not be over 8mm. If deeper than 8mm, another lateral hogging shall be added. Either side hogging(L) or down hogging(H). It is used for direct slotting of the side plate and drawer bottom plate of wardrobe, and it is more convenient by reducing working procedure of panel saw. 10.Buffing system:The two independent motors equipped with buffing wheels are used for cleaning and buffing after edge banding, easy to operate. Optional: Pneumatic reciprocating buffing by motors.11. Electric system Each functional group is controlled by independent Delta inverter to ensure the co-movement of the system (except the buffing and lifting motor). 12. Control panel The machine is equipped with DELTA touch screen, the human-computer control surface. The picture and words can directly reflect machine failures and solutions, which makes machine maintenance easier. 13.Pressure beam electric lifting systemThe rising and falling function of the pressure beam can be started rapidly through the operation screen. The separate position indicator can show the rising and falling height.Optionals: 1.Misting station
- Gluing system
B) Before buffing: Improve the cleaning effect of the plate. 2.Pneumatic Tool Alignment Systems 1.Input the new thickness of edgeband,then it can change the edgeband automatically.2.Position location of cylinder,work with 0.4-3mm edgeband.3.The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate. 3.Hot air blowersBrings high gloss shine back to PVC banding after the 3mm scrape station.Blow after the scrape station, make buffing effect better.4.Endplay buffingControl the buffing wheels movement by pneumatic control, prolong buffing wheel service life and improve buffing effect. Parameters
- Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
|Required air pressure||0.6Mpa|